1 / 5

Chapter 3: Diode Approximations

Chapter 3: Diode Approximations. There are three (3) Diodes Approximations: Ideal (1 st -Approximation) Second approximation Third Approximation For the 1 st -approx. assume the diode drop voltage is zero (Perfect closed switch)

griffin-gross
Download Presentation

Chapter 3: Diode Approximations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 3:Diode Approximations There are three (3) Diodes Approximations: Ideal (1st-Approximation) Second approximation Third Approximation For the 1st-approx. assume the diode drop voltage is zero (Perfect closed switch) For the 2nd-approx. assume the diode drop voltage of 0.7 volts For the 3rd –approx. assume the diode drop voltage of 0.7 volt and consider the forward bulk resistance of the diode: Vd = 0.7 V + Id x Rb (3-5) Ignoire bulk resistance of the diode if Rb < 0.01 Rth

  2. Forward Bulk Resistance Calculate the Bulk Resistance (Rb) from the formula given below: Rb = (V2 – V1)/(I2 – I1) Forward bulk resistance (Rb) is very small less than 1 Ohms or 10 Ohms. The bulk resistance is the dynamic resistance while current pass through the diode, but static resistance that usually measured by meter is relatively small compare to the bulk resistance. The reverse resistance of the diode is very large greater than 1 M-ohms.

  3. Example of 2nd-approximation

  4. Thevenin’s Equvalect Circuit

More Related