1 / 5

Green Energy Management Systems (G.E.M.S)

Green Energy Management Systems (G.E.M.S). Amey Rane Madhur Srivastava Tejas Pandit Varun Sivakumar. PCB Design Considerations. 2 PCB boards Power Adapter: Small, narrow to allow for portability. Base Unit: Must be able to fit a small LCD display (10”)

grover
Download Presentation

Green Energy Management Systems (G.E.M.S)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Green Energy Management Systems (G.E.M.S) Amey Rane Madhur Srivastava Tejas Pandit Varun Sivakumar

  2. PCB Design Considerations • 2 PCB boards • Power Adapter: Small, narrow to allow for portability. • Base Unit: Must be able to fit a small LCD display (10”) • Microchip Transceiver close to PCB edge. • Current Sensor must be close to PCB edge. • High Electromagnetic Interference from the power lines and most electric lines.

  3. Microcontroller Layout • Decoupling capacitors must be placed as close to the IC as possible. • Voltage regulators must be used to ensure that maximum input voltage of ATD is not exceeded. • The supply voltage to the microcontroller must be satisfied from the power line voltage. This requires the use of current rectifiers and regulators to supply DC voltage. • Tri-state buffers are required for the Tx/Rx pins

  4. Power Supply Voltage • The following voltage supplies are needed for different circuit components - +15,-15,+5,-5,+2.5V • The power supply needed by most of the components is DC thereby requiring the use of rectifiers and voltage regulators. • Requires circuit components which can tolerate high amounts of current(0-20A) and voltage fluctuations. • Requires fuses which can protect the rest of the circuit components from current surges.

  5. Questions

More Related