1 / 22

Status of Development on Silicon Telescope For Nanodosimetry

Status of Development on Silicon Telescope For Nanodosimetry. Santa Cruz Institute For Particle Physics University of California, Santa Cruz. Definition of Work. Mechanical Integration: ASIC’s on MCM’s Connector on MCM SSD’s and MCM’s Modules in Vessel Electronic Integration:

gudrun
Download Presentation

Status of Development on Silicon Telescope For Nanodosimetry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Status of Development on Silicon Telescope For Nanodosimetry Santa Cruz Institute For Particle Physics University of California, Santa Cruz

  2. Definition of Work • Mechanical Integration: • ASIC’s on MCM’s • Connector on MCM • SSD’s and MCM’s • Modules in Vessel • Electronic Integration: • Layout of MCM • Link Between Module and SSD • Link Between Module and DAQ • Cables and Connectors

  3. Components of Telescope

  4. Components of Telescope

  5. Module Frame

  6. Module Overview .8 2.7 PCB 10cm 9.1 6.4

  7. Components of Telescope

  8. GLAST Tracker

  9. Wire Bonding

  10. One Detector

  11. LLU MCM 2560 mil 6.5 cm 1375 mil 3.5 cm

  12. Components of Telescope

  13. Cable Vessel/DAQ Front Board Back Board

  14. Minimizing Errors • Mechanical errors • Spatial conflict • Out-gassing • Pressure(explosion/implosion) • Data errors • Use Identical DAQ • Test MCM with charge injection

  15. Minimizing Errors • Avoid Mechanical errors • Spatial conflict • Out-gassing • Pressure(explosion/implosion) • How big do ventilation holes need to be? • Avoid hardware errors • Use Identical DAQ • Test MCM with charge injection

  16. = Air Hole

  17. Minimizing Errors • Calibration/ Readout Errors • Patrick will discuss this subject

  18. Schedule

  19. Schedule

  20. Schedule

More Related