220 likes | 350 Views
National Reports May 2010 Quality Knowledge Exchange Network. 14 National reports. Status. Czech Republic : Possibilities of presentation for quality of lines of cadastral boundaries were discussed. How to present positional accuracy of measured points.
E N D
Status Czech Republic: Possibilities of presentation for quality of lines of cadastral boundaries were discussed. How to present positional accuracy of measured points • GB: Draft new agency performance monitors have been put on hold • Most effort is being spent on ensuring that quality will be maintained in the new seamless environment. • Accreditation of the new environment is seen as key Hungary Developing a 24 hours service of cadastral information via internet for public access, in the frame of „Electronic Government Operational Program 1.1.3” EU project Updating management documentations by changing the related standards. The integrated management system surveillance audit by the Certification Board based ISO 9001 & ISO 27001 Standards. • Greece: • B’ Phase of Cadastral Survey Programs: • Six (6) contracts have been undertaken and are running since November 2009. • Quality Control on the Quality Assurance Reports (QARs) for all contracts has been completed. • Quality Control procedures concerning the completeness of scanned documents (scanned legal titles and deeds) are undergoing. • The Quality Plan of the Cadastral Survey Program is under revision.KTIMATOLOGIO S.A. has submitted proposals to be funded by the National Strategic Reference Framework (NSRF 2007-2013) for two (2) projects concerning the development of services for data transposition to INSPIRE and the design of a new Information System / NSDI for environmental protection (including environmental data of INSPIRE Annex II and III). Page 3
Status • Ireland: • Document Portal Development ~wiki style, Data Quality Improvement Programme ~Phase 2, Extension to responsibilities of OSi DQMS, INSPIRE MetaData December Milestone Poland: Extension of Geoportal project - development of services quality monitoring tools Lithuania: Quality control of LIDAR project data (Digital Surface Model and orthophoto maps) for territory of Lithuania, Improvement of Quality management system (ISO 9001:2008, ISO 9004:2009) Spain: ICC: ISO 9001:2008 QMS scope extension to ICC 25K Topographic DB. Preparing also future inclusion of ICC 5K Orthophoto series Scale dependent methodology for quality control to accept cartography into the Catalan Cartographic Registry has been stablished Starting implementation of ITIL Methodology (ITIL ~ ISO 20000) IGN: ISO 9000 certification at Test Paper Laboratory ISO 9000 certification at Printing Division in progress CNIG is preparing for certification activities, IGN strategic project to implement EFQM Malta: Reviewing quality measures and statements of large-scale topographic products for publication in discovery services. Norway: In progress: Harmonize the conceptual data model and the implemented data model for the national cadastre system. Make clear routines for updating this two models.Make sure that the concepts used in different special field is harmonized.More requirements that are possible to express in the conceptual model Sweden: Strategic plan for quality development for the database of property. Quality awareness in the project in the collection data for a new elevation model Page 4
Austria: Real-time service for GIS-grid-transformation in position and height (between ETRS89 and MGI) has been implemented. The tender for the creation of “digital photo imagery and ortho-photos” 2010 (Area: 1/3 of Austria) has been accepted. The Project for the Conception, Implementation and Maintenance of the INSPIRE-MD-Server has started. Hungary: Reorganisation of FÖMI still in progress. Reduction of number of departments. Changeover some job among sections. General information Ireland: 3D City Model of Dublin~ LOD 3/5. New Data Model~ Prototype Delivered mid March Czech Republic: New COSMC Geoportal is prepared to be launched, Registries implementation started successfully • Malta: MEPA no longer receiving government funding • MEPA reform underway, some functions of the organisation are being assumed by other government agencies • GB: New seamless environment still on track for Autumn 2010 • New HQ building also on track for late 2010 (see next slide) • Government has announced that some OS data will be made available with no charge Norway: New section for Quality management represent the whole NMCA. New section for “pass on” data Poland: New bidding for harmonisation of national datasets with INSPIRE data specification • Lithuania: Participation in Geoland2 (Operational GMES Land Monitoring Core service) project (consortium). Participation in NatureSDIplus project (eContentplus Programme). Participation in HLANDATA (Creation of value – added services based on Harmonized Land Use and Land Cover Datasets) project (consortium). Participation in “Implementation of on Initial GMES service for Geospatial Reference Data Access” (subcontractor) Changing of geodetic and cartographic law in Lithuania Spain ICC: Developing a methodology to test conformance of ICC Web Services to INSPIRE NS requirements (discovery and view services), IGN: Strategic Plan (2006-2010) second phase Sweden: National coordination responsibility for geodata and the Geoportal management
Proposal for topic at next webinar • Quality evaluation procedures (Czech, Sweden) • Should be something to do with the actual measurement of quality. Lets see it in action (GB) • How NMCAs are managing quality in metadata (Greece) • Quality evaluation Web Services (Ireland) • Quality about Web Services (IGN, Spain) • How present quality information in Metadata (Malta) • Same topic, other NMCA (Norway) • Description and utilization of quality elements in data specification (Poland) • How to measure quality of INSPIRE services (Poland) • Compliancy of Organizations’ Network Services to INSPIRE (ICC, Spain) • QM split at NMAs into INSPIRE themes (IGN, Spain) Page 6
Proposals for DTM presentations at next plenary • ZABAGED 3D relief model in DGN, GRID 10x10km - pos. accuracy 1-3m (Czech) • Laser scanning for precision DTM creation started (Czech) • Possibly. We have just started evaluating the quality of a new dataset (GB) • EuroDEM as a mosaic of EuroGeographics members' national elevation data, and national tasks (Germany) • Quality control of DTM creation (2005-2006, 2008, 2009-2010)(Lithuania) • Carried out positional accuracy measures of DEM (Malta) • LIDAR data quality controls at ICC (data suited for DTM QC) (ICC, Spain) • Relative accuracy comparing DEM with Aerial Triangulation tie points (IGN, Spain) • Absolute accuracy comparing DEM with kinematic GPS points (IGN, Spain) • We are planning to use LIDAR (IGN, Spain) • Quality awareness in the project with a new elevation model (Sweden) Page 7
Proposal for presentations at next plenary • The integrated management system surveillance audit by the Certification Boardbased ISO 9001 & ISO 27001 Standards (Hungary) • Document Portal Development ~wiki style (Ireland) • Reviewing quality measures and statements of large-scale topographic products for publication in discovery services (Malta) • Starting implementation of ITIL Methodology (ITIL ~ ISO 20000) (ICC, Spain) • ISO 9000 certification at Test Paper Laboratory ISO 9000 certification at Printing Division in progress (IGN, Spain) Page 8
General information about Organisation Real-time service for GIS-grid-transformation in position and height (between ETRS89 and MGI) has been implemented. The tender for the creation of “digital photo imagery and ortho-photos” 2010 (Area: 1/3 of Austria) has been accepted. The Project for the Conception, Implementation and Maintenance of the INSPIRE-MD-Server has started. BEV, Austria From November 2009 to May 2010
Data Quality and Quality management Possibilities of presentation for quality of lines of cadastral boundaries were discussed How to present positional accuracy of measured points? General information about Organisation New COSMC Geoportal is prepared to be launched Registries implementation started successfully Topic for next webinar Quality evaluation procedures DTM at plenary meeting in France ZABAGED 3D relief model in DGN, GRID 10x10km - pos. accuracy 1-3m Laser scanning for precision DTM creation started COSMC, Czech Republic From December 2009 to April 2010 Page 10
Data Quality and Quality management --- General information about Organisation --- Topic for next webinar --- DTM at plenary meeting in France BKG took the responsibility to produce EuroDEM as a mosaic of EuroGeographics members' national elevation data. I can ask the responsible colleague to give a presentation about this work and this national tasks, too. BKG, Germany Brussels meeting May 2010 Page 11
Data Quality and Quality management Draft new agency performance monitors have been put on hold Most effort is being spent on ensuring that quality will be maintained in the new seamless environment. Accreditation of the new environment is seen as key General information about Organisation New seamless environment still on track for Autumn 2010 New HQ building also on track for late 2010 (see next slide) Government has announced that some OS data will be made available with no charge Topic for next webinar Should be something to do with the actual measurement of quality. Lets see it in action DTM at plenary meeting in France Possibly. We have just started evaluating the quality of a new dataset Ordnance Survey GB From Nov 2009 to April 2010
Data Quality B’ Phase of Cadastral Survey Programs: Six (6) contracts have been undertaken and are running since November 2009. Quality Control on the Quality Assurance Reports (QARs) for all contracts has been completed. Quality Control procedures concerning the completeness of scanned documents (scanned legal titles and deeds) are undergoing. The Quality Plan of the Cadastral Survey Program is under revision. Quality Management New procedures are drafted in order to be embedded into the Handbook of Cadastral Survey Contract Management and Supervision on behalf of the Department of Projects. General information about Organisation KTIMATOLOGIO S.A. has submitted proposals to be funded by the National Strategic Reference Framework (NSRF 2007-2013) for two (2) projects concerning the development of services for data transposition to INSPIRE and the design of a new Information System / NSDI for environmental protection (including environmental data of INSPIRE Annex II and III). Topic for next webinar How NMCAs are managing quality in metadata. DTM at plenary meeting in France No advances to be presented concerning the Quality of DTMs. KTIMATOLOGIO S.A (Hellenic Cadastre) / GREECE From December 2009 to April 2010
FÖMI, Hungary From November 2009 to April 2010 Data Quality and Quality Management Developing a 24 hours service of cadastral information via internet for public access, in the frame of „Electronic Government Operational Program 1.1.3” EU project Updating management documentations by changing the related standards. The integrated management system surveillance audit by the Certification Board based ISO 9001 & ISO 27001 Standards. General information about Organisation Reorganisation of FÖMI still in progress. Reduction of number of departments. Changeover some job among sections. Topic for next webinar No suggestion at this time DTM at plenary meeting in France Nothing to report
Data Quality and Quality management Document Portal Development ~wiki style Data Quality Improvement Programme ~Phase 2 Extension to responsibilities of OSi DQMS INSPIRE MetaData December Milestone General information about Organisation 3D City Model of Dublin~ LOD 3/5 New Data Model~ Prototype Delivered mid March Topic for next webinar Quality evaluation Web Services DTM at plenary meeting in France This is a work in progress so we are very interested! Ordnance Survey, Ireland, Ireland From January 2010 to May 2010
Data Quality and Quality management Quality control of LIDAR project data (Digital Surface Model and orthophoto maps) for territory of Lithuania Improvement of Quality management system (ISO 9001:2008, ISO 9004:2009) General information about Organisation Participation in Geoland2 (Operational GMES Land Monitoring Core service) project (consortium) Participation in NatureSDIplus project (eContentplus Programme) Participation in HLANDATA (Creation of value – added services based on Harmonized Land Use and Land Cover Datasets) project (consortium) Participation in “Implementation of on Initial GMES service for Geospatial Reference Data Access” (subcontractor) Changing of geodetic and cartographic law in Lithuania Topic for next webinar no ideas ;) DTM at plenary meeting in France Quality control of DTM creation (2005-2006, 2008, 2009-2010) Institute of Aerial Geodesy, Lithuania From November 2009 to May 2010
Data Quality and Quality management Reviewing quality measures and statements of large-scale topographic products for publication in discovery services. General information about Organisation MEPA no longer receiving government funding MEPA reform underway, some functions of the organisation are being assumed by other government agencies Topic for next webinar How present quality information in Metadata DTM at plenary meeting in France Carried out positional accuracy measures of DEM MEPA, Malta From December 2009 to May 2010
Data Quality and Quality management In progress: Harmonize the conceptual data model and the implemented data model for the national cadastre system. Make clear routines for updating this two models.Make sure that the concepts used in different special field is harmonized.More requirements that are possible to express in the conceptual model General information about Organisation New section for Quality management represent the whole NMCA. New section for “pass on” data Topic for next webinar Same topic, other NMCA DTM at plenary meeting in France Norwegian Mapping Authority Norway From November 2009 – To April 2010
Data Quality and Quality management Extension of Geoportal project - development of services quality monitoring tools General information about Organisation New bidding for harmonisation of national datasets with INSPIRE data specification Topic for next webinar Description and utilization of quality elements in data specification How to measure quality of INSPIRE services? DTM at plenary meeting in France Head Office of Geodesy and Cartography, PL From December 2009 to May 2010
Data Quality and Quality management ISO 9001:2008 QMS scope extension to ICC 25K Topographic DB. Preparing also future inclusion of ICC 5K Orthophoto series Scale dependent methodology for quality control to accept cartography into the Catalan Cartographic Registry has been stablished Starting implementation of ITIL Methodology (ITIL ~ ISO 20000) General information about Organisation Developing a methodology to test conformance of ICC Web Services to INSPIRE NS requirements (discovery and view services), so... Topic for next webinar Compliancy of Organizations’ Network Services to INSPIRE DTM at plenary meeting in France LIDAR data quality controls at ICC (data suited for DTM QC) ICC, Catalonia - Spain From December 2009 to April 2010 Page 20
Data Quality and Quality management ISO 9000 certification at Test Paper Laboratory ISO 9000 certification at Printing Division in progress CNIG is preparing for certification activities IGN strategic project to implement EFQM General information about Organisation IGN Strategic Plan (2006-2010) second phase Topic for next webinar QM split at NMAs into INSPIRE themes Quality about Web Services DTM at plenary meeting in France Relative accuracy comparing DEM with Aerial Triangulation tie points Absolute accuracy comparing DEM with kinematic GPS points We are planning to use LIDAR in near future but we don’t have any methodology yet. IGN, Spain From December 2009 to May 2010
Data Quality and Quality management Strategic plan for quality development for the database of property Quality awareness in the project in the collection data for a new elevation model General information about Organisation National coordination responsibility for geodata and the Geoportal management Topic for next webinar Quality evaluation procedures DTM at plenary meeting in France Quality awareness in the project with a new elevation model Lantmäteriet, Sweden From December 2009 to May 2010