1 / 34

HELI 1-10T IC Forklift-2013

Always Specialized, Steady, Responsible Partner. HELI 1-10T IC Forklift-2013. Anhui Heli Co.Ltd. HELI 1-10T IC Forklift-2013. Content 1 、 General info for 1-10T IC Forklift 2 、 New product for 1-10T IC Forklift 3 、 Improvement on 1-10T IC Forklift. General info for IC Forklift.

gustav
Download Presentation

HELI 1-10T IC Forklift-2013

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Always Specialized, Steady, Responsible Partner HELI 1-10T IC Forklift-2013 Anhui Heli Co.Ltd..

  2. HELI 1-10T IC Forklift-2013 Content 1、General info for 1-10T IC Forklift 2、New product for 1-10T IC Forklift 3、Improvement on 1-10T IC Forklift

  3. General info for IC Forklift

  4. 1-3.5T IC forklift

  5. 5-10T IC Forklift

  6. New Model-1 H2000 series 5-7T with GM4.3 gasoline engine(inc. LPG) Performance comparison for 5-7t with TB42 and GM4.3 engine • Electronically controlled GM4.3 engine, with advanced technology and easy maintenance. • Lower exhaust, lower noise, low fuel consumption. • Dual LPG bottles with automatic switchover between bottles • Load sensing technology for hydraulic system with high working efficiency. • electric-hydraulic direction switch with easy operation to relieve the operator.

  7. New Model-2 H2000series 10T with Perkins 1204E 1.Engine emission complying with EU Stage IIIB and EPA Tier 4i regulation. 2. With DPF+DOC exhaust treating measure, the PM value is reduced by 90%, NOx value is reduced by 60%. 3. With Rexroth hydraulic actuating device, API Aluminum radiator , Multi-wing fan, the radiating effect is increased by 10%, the noise is reduced by 3Db, and the fuel consumption is reduced by 5% 4. Standard rear-window glass to prevent the hot-air directly to driver. Excellent Donaldson air filter 5. With new treating measures on hydraulic oil filtering and cooling, improve the working-condition of the hydraulic oil and reduce the failure rate of the hydraulic components.

  8. New Model-3 New H series-1-3.5T IC forklift-1

  9. New Model-3 New H series-1-3.5T IC forklift-2 Adopting new CAE design technology and implement of forward design, optimize the structure & layout to strengthen the chassis, overhead guard and dashboard, also to avoid resonated vibration. Mounting the air intake silencer on the air inlet inside the overhead guard to lower down the driver’s ear noise. Driver’s cab was hanged onto the chassis with supported shock pad, also the hanged brake pedal would relieve the vibration to driver. Air intake silencer Hanged brake front./rear 4 shock pad

  10. New Model-4 New H series-1-3.5T IC forklift-3 • Optimize the engine hood design to enlarge the driver foot space； • Reduce the height of dashboard, and put the display on the right, to widen the diver’s forward vision. • Heighten the overhead guard by 100mm to enlarge the space. • Use the small-diameter steering wheel to relieve the driver’s fatigue. • With electric-hydraulic direction switch to ensure the comfortable operation Smaller steering wheeler Dashboard

  11. New Model-4 New H series-1-3.5T IC forklift-4 • Adopting the casting steering axle to improve the waterproof and dustproof of the steering knuckleto prolong the working life and increase the quality reliability. • Adopting the new adjusting device for steering wheel to assure the convenience, easy and reliability. • By adding more baffle plates to prevent the hot-air reflow, optimize the hot-air transfer channel on the counterweight, use the aluminium radiator to improve the heat radiating, prolong the engine working life. • Using the new engine hook lock for convenient operation. • Adopting the fixed displacement pump load sensing steering system to reduce the hydraulic oil temperature, increase the lifting speed

  12. The difference between old H2000 and New H series

  13. New Model-5 New second generation G(GII) series 2-3.5t-1

  14. New Model-5 New second generation G(GII) series 2-3.5t-2 • Adopting flexible transmission and V-type support to engine, greatly reduce the vibration, the hyd pump is fitted onto the transmission PTO port for easy maintenance. • Casting steering axle：greatly improve the waterproof and dustproof, reduce the maintenance cost, prolong the working life the axle

  15. New Model-5 New second generation G(GII) series 2-3.5t-3 • Adopting sunken mast, move the tilt cylinder down to increase the arm of force, reduce the tension and pressure, decrease the failure rate of the hydraulic system. • The inclining-angle of front footplate was changed into 15°from 25°, enlarge the foot space, relieve the leg fatigue

  16. New second generation G(GII) series 2-3.5t-4 • Redesign the display and dashboard, dashboard is covered by metal material, safe and reliable, elegant appearance. • The display is put on the right side, steering oil-pipe and display harness is laid out separately to ensure the safety of electric system. • New adjusting mechanism for steering wheel to increase the locking arm of force, free maintenance, move the turning pivot to increase the leg space, move the steering orbital down to reduce the ear noise

  17. New second generation G(GII) series 2-3.5t-5 • Hanged accelerating pedal mechanism to prevent the vibration transfer to driver’s leg from chassis • Adopting the plate-wing aluminium radiator and two blowhole on counterweight，reduce the heat, avoid the engine and transmission problem because of overheating. • Compared with old tube type radiator, the heat balance temperature is reduced by 3.4 degree.

  18. New second generation G(GII) series 2-3.5t-6 • Adopting toothed parking brake, implement different parking force on ramp and flat ground to increase the parking reliability. • New engine hood lock, easy, convenient. operation • Fully cover the under-side of dashboard to reduce noise to driver

  19. New second generation G(GII) series 2-3.5t-7 • Compared with old G series, the new GII with flexible transmission had been improved a lot particularly on the vibration. • Red line is for old G series，blue and green line is for new G2。

  20. New second generation G(GII) series 2-3.5t-8

  21. New G series 5-10t model-1

  22. New G series 5-10t model-2 • Streamlined appearance Shock pad • Driver’s Cab is hanged onto the chassis through the shock pad, improve the vibration. • Driver’s cab is fully sealed from engine compartment to prevent the engine noise transfer. • Adopting the impedance compound muffler to reduce the exhaust noise Fully sealed cover

  23. New G series 5-10t model-3 • Electric harness is laid out over the oil pipe, the exhaust pipe and all type of oil way are separately laid out on the left/right side to ensure the safety • Increase the wheelbase for 5-7T by 50mm for better stability. • Use the fully covered dashboard for safety.

  24. New G series 5-10t model-4 • Enlarge the blowhole, use the high-performanced aluminium radiator to increase the heat radiating. • New engine hood lock, easy and convenient. • Use the fixed displacement pump load sensing steering system to reduce the hydraulic oil temperature, to increase the lifting speed.

  25. New G series 5-10t model-5 • Implement of forward design, optimize the operating mechanism and layout, relieve the driver fatigue, improve the comfortability. • Use wider mast to have better visibility. • Toothed parking brake to have different parking force on ramp and flat ground, improve the parking reliability. • Use the integrated electric box, easy maintenance.

  26. Quality improvement-1 Performance improved muffler for G series By the analysis and testing, the new muffler have the 30dB noise reduction effect.

  27. Quality improvement-2 Improvement of the piston rod of steering cylinder all the piston rod are treated with mid/high frequency quenching, to make the piston rod surface hardness≥HRC67，to avoid the quality problem because of less hardness

  28. Quality improvement-3 Improvement on the brake Trim the vertical degree of brake shoes, to ensure the gap under the below part of brake shoes, change the touching surface between brake shoes and pin into fillet to get the automatic adjustment. The improved brakes shoes is in over 95% surface touched to improve the brake efficiency

  29. Quality improvement-4 Improvement on the control box 欣大943-1C-12DS继电器 RC吸收保护回路 By using the new relay to improve the quality of control box.

  30. Quality improvement-6 Improvement of the cleanness on hydraulic system for 5-10t for each 5-10t forklift in assembly, the hydraulic system needed to be cleaned by KLEENOLL filtering equipment. The cleanness would reach NAS11 class after 20min circulating filtering.

  31. Quality improvement-7 By changing of the matching gap between guide-shaft support, changing the elastic-plates thickness, increase the manufacturing precision of the hydraulic pump gear, greatly reduce the noise from transmission. Reduce the noise from transmission for 5-10t

  32. Quality improvement-8 New wide view triplex mast for 5-10t

  33. Quality improvement-9 New cabin

  34. Thank You All! Always Specialized, Steady, Responsible Partner Anhui Heli Co.,Ltd.

More Related