1 / 12

Part name:- Hydraulic lift housing H2 OIB Part no:- 0072000583C1

DT:- 11-12-12. Part name:- Hydraulic lift housing H2 OIB Part no:- 0072000583C1. SRF proposes modification for tooling development. MODEL. MODEL. MODEL. 1) Parting line flashes needs be grind. Marks will raised.

gzifa
Download Presentation

Part name:- Hydraulic lift housing H2 OIB Part no:- 0072000583C1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. DT:- 11-12-12 Part name:- Hydraulic lift housing H2 OIB Part no:- 0072000583C1 SRF proposes modification for tooling development.

  2. MODEL

  3. MODEL

  4. MODEL

  5. 1) Parting line flashes needs be grind. Marks will raised.

  6. 2) As per drawing unspecified fillet radius is 0.25” (6.35mm). Joint face cast radius observed 2.5mm on 3D Model. SRF Proposes for R6.35.

  7. 3) Pocket radius observed R1.0mm on 3D model, SRF Proposes to consider unspecified R6.35mm.

  8. 4) Variable radius observed 7.5mm to 3.0mm at spot face cast radius at Q.C. window side. 4) Uniformly 7.5mm radius observed at Export pad side.

  9. 5) With providing 0.5° draft relieve will maintain 2.5to 1.5mm 5) Draft angle not provided to C.V. Side. Cast face. Present relieve is 3.3mm.

  10. Maintain fillet radius. 6) SRF Proposes to check feasibility to remove highlighted red marked area.

  11. 7) As per drawing wall thickness provided 0.315 max ( 8.00mm) SRF Proposes to make liberal tolerance 8.0±1.0mm as per CT9

  12. 8) SRF Proposes to provide 2nos boss dia 20mm. Height 1.0mm. To avoid drill drift .

More Related