Product comparison for KUHN RW 1600

1. General comments Table Pre-stretcher Film cutter Options Product comparison for KUHN RW 1600

3. Wrap Unload Ready for next bale Competition Wrap Wait for fall damper Lower bale to ground Ready for next bale Product comparison for KUHN RW 1600 KUHN RW 1600 is a heavy duty professional use bale wrapper, designed with low table height and wheels located at the rear of the machine. Compared to traditional designs with wheels underneath the table, the RW 1600 has considerable benefit to the user. • The very low table tip height of the RW 1600 eliminates the need to wait for a fall damper to raise and control the drop of the wrapped bale. This increases the overall capacity by around 10%.

4. Transport Wrap Unload Competition Wrap Unload Transport Product comparison for KUHN RW 1600 Rear location of the wheels provides constant weight transfer to the front, eliminates up-and-down movements of the drawbar caused by a loss of tongue weight when unloading bales.

5. Elho 1410 Tanco 580 KUHN RW 1600 McHale 991B Wheels under table – fall damper needed – slow unloading – kicks in drawbar during transport Wheels under table – fall damper needed – slow unloading – kicks in drawbar during transport Wheels under table – fall damper needed – slow unloading – kicks in drawbar during transport Limited clearance for grass/waste to fall through No table belts may lead to uneven rotation and improper sealing Limited clearance for grass/waste to fall through Low design of machine- Quicker unloading and higher capacity- Improved stability in transport Heavy spring to compress when replacing film roll Fixed distance between film holder cones Fixed distance between film holder cones Full control of bale rotation Separate lever for operation of film cutter on manual machines Separate lever for operation of film cutter on manual machines Separate lever for operation of film cutter on manual machines Easy change of film roll Fully automatic film cutter Only alternative to computer control is fully manual Only alternative to computer control is fully manual Only alternative to computer control is fully manual Automatic table stop converts manual machine to semi-automatic

6. Low design of machine, with wheels at the back 90% heavier than KUHN, but handles only 10% heavier bales Able to carry a second bale in loading arm whilst wrapping the first Handle bales up to 2425 lbs 1100 kg Table tips to ground for unloading – no need to wait for fall damper to raise and take care of bale Total weight of machine 4122 lbs 1870 kg Optimised weight transfer to tractor – improved traction in field and good stability in transport. Significant drop height, fall damper required 1. General comments KUHN RW 1600 McHale 991B

7. Three table belts ensure fully controlled rotation of bale Four table belt giving same control of rotation as KUHN 1600 Open design to ensure that table stays clean Limited clearance for grass to fall through Adjustable support rollers, to match with different bale widths Only 2 support roller positions Large distance between table rollers for good stability of bale 2. Table KUHN RW 1600 McHale 991B

8. Easy replacement of film roll thanks to self-locking flip-over design of upper lock plate Heavy to push upper cone upwards when changing film roll Straight roller ends less gentle to film edges Straight rollers give less control of film width Conic stretch roller ends gentle to film edges, reducing film tear problems Moveable film roll and fixed stretch rollers - difficult to route film between rollers Optimum width of film after stretch, thanks to conical roller ends Moveable film roll and fixed stretch rollers - opens too easily during transport, and film roll may disappear 3. Pre-stretcher KUHN RW 1600 McHale 991B

9. Fully automatic film cutter, no need to operate manually Eliminates need for an extra control lever on manual operated wrappers Firm hold of film by adjustable retainer / pressure roller 4. Film cutter KUHN RW 1600 McHale 991B Manual operated film cutter, require separate lever for operation on manual operated machines McHale 991B

10. Automatic table stop (1600M) -> semi-automatic operation at an attractive price Only alternative to computer control is fully manual (4 levers or 4-functions joystick) Two-bar bale turner with 4-way rotating stop disc, for gentle and fully controlled side tip. Hydraulic tip arm available, for improved turning of bale on hillsides. Baleturner with high risk of damage to stretch film Film magazine for 3 spare rolls of film Film magazine for up to 6 spare rolls of film 15” 390 mm wide wheels available Large floatation wheels standard 5. Options KUHN RW 1600 McHale 991B

11. Low design of machine, with wheels at the back Fairly strong machine Able to carry a second bale in loading arm whilst wrapping the first Max 2755 lbs 1250 kg bale weight Table tips to ground for unloading – no need to wait for fall damper to raise and take care of bale Total weight of machine 2535 lbs 1150 kg Optimised weight transfer to tractor – improved traction in field and good stability in transport. Significant drop height, fall damper required 1. General comments KUHN RW 1600 Elho 1410

12. Three table belts ensure fully controlled rotation of bale No table belts may lead to uneven rotation and improper sealing Lack of belts give open design Open design to ensure that table stays clean Fixed support roller positions Adjustable support rollers, to match with different bale widths Short distance between table roller reduces stability of bale Large distance between table rollers for good stability of bale 2. Table KUHN RW 1600 Elho 1410

13. Easy replacement of film roll thanks to self-locking flip-over design of upper lock plate Straight roller ends less gentle to film edges Conic stretch roller ends gentle to film edges, reducing film tear problems Straight rollers give less control of film width Optimum width of film after stretch, thanks to conical roller ends Adjustable upper cone, to match different lengths of film roll core Fixed distance between film holder cones 3. Pre-stretcher KUHN RW 1600 Elho 1410

14. Fully automatic film cutter, no need to operate manually Eliminates need for an extra control lever on manual operated wrappers Firm hold of film by adjustable retainer / pressure roller 4. Film cutter KUHN RW 1600 Elho 1410 Manual operated film cutter, require separate lever for operation on manual operated machines

15. Automatic table stop (1600M) -> semi-automatic operation at an attractive price Only alternative to computer control is fully manual Two-bar bale turner with 4-way rotating stop disc, for gentle and fully controlled side tip. Hydraulic tip arm available, for improved turning of bale on hillsides. Baleturner design with less control of bale rotation Film magazine for 3 spare rolls of film Film magazine for up to 6 spare rolls of film 14” 360 mm wide wheels and tandem available Large floatation wheels standard 5. Options KUHN RW 1600 Elho 1410

16. Low design of machine, with wheels at the back Heavier machine than KUHN, but not able to handle heavier bales Able to carry a second bale in loading arm whilst wrapping the first Handle bales up to 2204 lbs 1000 kg Table tips to ground for unloading – no need to wait for fall damper to raise and take care of bale Total weight of machine 2469 lbs 1120 kg Optimised weight transfer to tractor – improved traction in field and good stability in transport. Significant drop height, fall damper required 1. General comments KUHN RW 1600 Tanco 580

17. Three table belts ensure fully controlled rotation of bale One full width table belt Limited (no) clearance for grass to fall through Open design to ensure that table stays clean Only 2 support roller positions Adjustable support rollers, to match with different bale widths Weak table hub bearing, additional carriage rollers required Short distance between table roller reduces stability of bale Large distance between table rollers for good stability of bale 2. Table KUHN RW 1600 Tanco 580

18. Heavy to push upper cone upwards when changing film roll Easy replacement of film roll thanks to self-locking flip-over design of upper lock plate Conic stretch roller ends gentle to film edges, reducing film tear problems Straight roller ends less gentle to film edges Straight rollers give less control of film width Optimum width of film after stretch, thanks to conical roller ends Adjustable upper cone, to match different lengths of film roll core 3. Pre-stretcher KUHN RW 1600 Tanco 580

19. Fully automatic film cutter, no need to operate manually Eliminates need for an extra control lever on manual operated wrappers Firm hold of film by adjustable retainer / pressure roller 4. Film cutter KUHN RW 1600 Tanco 580 Manual operated film cutter, require separate operation on manual machines

20. Automatic table stop (1600M) -> semi-automatic operation at an attractive price Only alternative to computer control is fully manual Two-bar bale turner with 4-way rotating stop disc, for gentle and fully controlled side tip. Hydraulic tip arm available, for improved turning of bale on hillsides. Baleturner with high risk of damage to stretch film Film magazine for 2 spare rolls of film Film magazine for up to 6 spare rolls of film Max 12” 300 mm wide wheels Large floatation wheels standard 5. Options KUHN RW 1600 Tanco 580