1 / 40

Common problems you will find in roofing systems

Common problems you will find in roofing systems. Fracture of a PVC flashing detail at a parapet wall caused by tenting and careless window cleaning workers. Spalling of concrete surface and purging on an apartment building balcony overhang. Blisters and ridges on conventional BUR.

hadar
Download Presentation

Common problems you will find in roofing systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Common problems you will find in roofing systems

  2. Fracture of a PVC flashing detail at a parapet wall caused by tenting and careless window cleaning workers

  3. Spalling of concrete surface and purging on an apartment building balcony overhang.

  4. Blisters and ridges on conventional BUR

  5. Rusted and corroded metal flashing at a roof flashing detail

  6. Wind blow off modified BUR caused improper roofing applications and lack of asphalt between fireboard overlay and original roof.

  7. Wind blow off of modified BUR caused by improper roofing applications and lack of asphalt between fireboard overlay and original roof.

  8. Plant growth on roof and an unballasted PVC roof.

  9. View of a roof with excessive snow loading.

  10. Illustration of a poor wall flashing detail, note exposed cant. Buildings were built at separate times and were never properly tied together.

  11. Improperly flashed EPDM roof drain detail.

  12. Lack of horizontal support

  13. Opening in flashing detail at scupper.

  14. View of non-insulated pipe and condensation that has occurred.

  15. Illustration of severe water ponding due to poor drainage.

  16. Oversized entry point for gas pipe.

  17. Typical longitudinal ridge. This type is caused by movement of the insulation substrate. This could be caused by delaminating of the insulation with the deck or vapour retarded or shrinkage of the insulation.

  18. Substrate not properly prepared

More Related