1 / 9

draft-rkhd-mpls-tp-sd-00

draft-rkhd-mpls-tp-sd-00. IETF 78 July 2010 Rafi Ram ( rafir@orckit.com ) Masahiro Daikoku ( ms-daikoku@kddi.com ). Problem Statement. Provide carrier view guide lines for signal degrade detection for protection triggering

haile
Download Presentation

draft-rkhd-mpls-tp-sd-00

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. draft-rkhd-mpls-tp-sd-00 IETF 78 July 2010 Rafi Ram (rafir@orckit.com) Masahiro Daikoku (ms-daikoku@kddi.com)

  2. Problem Statement • Provide carrier view guide lines for signal degrade detection for protection triggering • Suggest SD detection approach originating from server MEP sub-layer • Provide end-to-end view on architecture of : • Signal degrade detection • Signal degrade condition notification • Signal degrade consideration in protection switching

  3. Guide Lines for SD Detection (1) • Method MUST not disrupt the forwarded services • e.g. add delay or jitter to real time traffic • Criterion for determining signal degrade MUST be agnostic to : • Length and rate of frames transmitted • Traffic class and drop precedence marking of frames • Link congestion level

  4. Guide Lines for SD Detection (2) • Method SHOULD be able to detect low BER condition • Method SHOULD have low miss-detection and false alarm probabilities • Method SHOULD be agnostic to number of LSPs or PWs forwarded over the link • Method for determining signal degrade is RECOMMENDED not to require transmission of traffic exclusively dedicated for this purpose

  5. Examples for SD Detection Methods • 1GE PCS : Measurement of rate of 10bit code violations and dispersion errors • 10GE PCS : Measurement of rate of errored 66bit block headers • Note : These examples work as long as the layer carrying the information used for SD detection is not terminated in between two MPLS-TP transport entities

  6. SD Condition Notification • A server MEP identifying SD condition should advertise this condition to the MPLS entity handling the protection • Propose addition of a new fault message type “Link Condition Indication” (LCI) • The LCI message can have the following impairment flags : (1) Link performance is reduced (i.e. signal degraded) (2) Link is congested (3) Link rate is reduced Note : Using the existing LDI for conveying SD may have the following drawbacks : 1. It does not allow the flexibility to report of various impairment conditions 2. Need to differentiate between “link down” condition (equivalent to SF) and “link reduced” (equivalent to SD), since for APS state machine SF has higher priority than SD

  7. SD Consideration for Protection Switching • SD has a lower protection priority than SF-W, but higher than MS • SD-P and SD-W have similar protection priority : • If SD-P occurs firstand then SD-W, there is no change of state • If SD-W occurs firstand then SD-P, there is no change of state

  8. Next Steps • Add section of SD BER for various transport technologies and applications • Address any comments • Republish

  9. Questions ? Comments ?

More Related