1 / 17

In the name of Allah Spectrum Sensing Based on Cyclostationarity

In the name of Allah Spectrum Sensing Based on Cyclostationarity. Presented by: Eniseh Berenjkoub Summer 2009. Content. Cognitive radio and its demands Introduction to Cyclostationarity Detection based on Cyclostationarity Conclusion. Cognitive Radio. For What

hamilton-case
Download Presentation

In the name of Allah Spectrum Sensing Based on Cyclostationarity

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. In the name of AllahSpectrum Sensing Based on Cyclostationarity Presented by: EnisehBerenjkoub Summer 2009

  2. Content Cognitive radio and its demands Introduction to Cyclostationarity Detection based on Cyclostationarity Conclusion

  3. Cognitive Radio For What Primary versus secondary user Spectrum sensing interference Using idle channels

  4. Spectrum Sensing Different methods Matched filter Energy detector Cyclostationary method …

  5. Spectrum Sensing… Need for doing well in low SNRs Differentiate between noise, interference & signal Using one detector Does not require signal information Robustness against noise power uncertainty

  6. Spectrum Sensing… “the sensing tiger team of the IEEE 802.22 group specified the requirements of the spectrum sensing of ATSC DTV signals: the miss detection probability (PMD) should not exceed 0.1 subject to a 0.1 probability of false alarm (PFA) when the SNR is -20.8 dB”

  7. Cyclostationarity Hand made signals are Cyclostationary! Noise assumed to be stationary So: we can differentiate between them

  8. Cyclostationarity… Definition: So:

  9. Cyclostationarity… In more general case: (Almost Cyclostationary) A is the set of freq. for which:

  10. Cyclostationarity… Then we have: We call Rxα(τ) “Cyclic auto-correlation function”, Sxα(f) “Spectral Correlation Density function (SCD)” or “Cyclic spectrum”, and α “Cycle frequency”

  11. Detection Estimation of Cyclic auto-correlation function : Do it for several delay, so:

  12. Detection… Estimate Rxα(τ) for several cycle freq. hypothesis test:

  13. Detection… Choose an appropriate statistic Choose a threshold Calculate the statistic according to SCD So SCD should be estimated

  14. Some Note Rate of False Alarm is very important CFAR methods Different method for estimating SCD Better performance by cooperative spec. sensing Better performance by using multiple antennas

  15. Major Challenge High complexity SCD has two dimensions Large size of FFT Time consuming Miss the opportunities Calculating SCD in special freq. and cycle freq.

  16. Conclusion Detection based on Cyclostationarity is a solution for CR But… It has its problems There is a lot of work to do!

  17. Any Questions?

More Related