210 likes | 510 Views
Noise Compatible Land Use Planning. Mark Ferroni, Leader Highway Traffic Noise Team. June 27-29, 2006 FHWA Environmental Conference. Federal Regulation. 23 CFR Part 772: Procedures for Abatement of Highway Traffic Noise and Construction Noise
E N D
Noise Compatible Land Use Planning Mark Ferroni, Leader Highway Traffic Noise Team June 27-29, 2006 FHWA Environmental Conference
Federal Regulation • 23 CFR Part 772: Procedures for Abatement of Highway Traffic Noise and Construction Noise • “…to establish requirements for information to be given to local officials for use in the planning and design of highways….”
Section 772.5: Definitions • Type I • Projects on new location • Physical alteration of horizontal and/or vertical alignment • Increase in the number of through travel lanes • Type II • A proposed Federal or Federal-aid highway project for noise abatement on an existing highway.
Section 772.7(b)Applicability of Type II • 772.7(b): • Type II projects are not mandatory requirements of this regulation. • Development and implementation of Type II projects are at the option of the State DOT
Section 772.13(b)Federal Participation • Federal funding for noise abatement for Type II projects only approved: • If approved before 11/28/95, or • Proposed along lands where land development or substantial construction predated the existence of any highway • For areas not previously rejected for a barrier in a Type I project
Section 772.15Information for Local Officials • To help prevent future traffic noise impacts on currently undeveloped lands, provide: • Best estimate of future noise levels • Information useful to adjacent communities • Information on Federal Type II funding ineligibility
3-Part Approach to Highway Traffic Noise Control • Source Control • Highway Facilities Measures • Noise Compatible Land Use Planning
Brakes Source Control: Noise Sources for Heavy Trucks Exhaust Air Intake Tire Noise Engine Fan Gears
Highway Facility Measures • Location:Highway alignments & existing terrain • Operation: Speed Reduction, Truck Prohibition, Lane Restrictions, Signal Timing (TCMs) • Design:Buffer Zone, Building Insulation, Vegetation, Pavement Type, Earthen Berms, Noise Barriers
Noise Compatible Land Use Planning • Local governments guiding the development of un-developed land near existing highways. • Ways to reduce the impact of highway-generated noise upon existing developed activities
How to accomplish…. • Planning Practices • Developer Practices • Building Practices • State Examples
Planning Practices • Place specific language on legal documents & plats San Antonio, Texas subdivision plats state: “For residential development directly adjacent to State right of way, the Developer shall be responsible for adequate set-back and/or sound abatement measures for future noise mitigation.”
Planning Practices • Encourage nonresidential uses
Planning Practices • Include buffer zones, increase setbacks • Adopt land use compatible standards into city codes
Developer Practices • Buffer zone between roadway and development (i.e. earthern berms, recreational features)
Developer Practices • Single story units adjacent to roadway
Developer Practices • Less sensitive areas of houses facing roadway • Outdoor activities away from roadway
Building Practices • Double paned windows • Increased insulation • Removal of windows facing roadway
State Examples • Pennsylvania • South Dakota • Texas • Washington • Arizona • California • Maryland • Montana • Ohio
Be Proactive • Begin dialogue NOW • Consider noise compatible land use planning options when: • modifying Comprehensive Plans, • adopting standards • Education – inform the public