1 / 26

Class F3P Indoor Aerobatic Power Model aircrafts

Class F3P Indoor Aerobatic Power Model aircrafts. Schedule F3P – AP-15. Take-off procedure ( not judged, not scored ). Security line. F3P-AP-15.01: Square Reverse Cuban Eight with roll up, two consecutive 1/4 rolls up. ¼ roll. roll. ¼ roll. F3P-AP-15.01.01.

hank
Download Presentation

Class F3P Indoor Aerobatic Power Model aircrafts

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Class F3P Indoor Aerobatic Power Model aircrafts Schedule F3P – AP-15

  2. Take-off procedure ( not judged, not scored ) Security line

  3. F3P-AP-15.01: Square Reverse Cuban Eight with roll up, two consecutive 1/4 rolls up ¼ roll roll ¼ roll F3P-AP-15.01.01

  4. F3P-AP-15.01: Square Reverse Cuban Eight with roll up, two consecutive 1/4 rolls up ¼ rolls centered on middle of the line. Roll on middle of the line. ¼ roll roll ¼ roll 45° 45° All radii are equal. F3P-AP-15.01.02

  5. F3P-AP-15.02: Knife-Edge Trombone with 1/4 roll up, 1/4 roll down pushed half circle 1/4 roll 1/4 roll F3P-AP-15.02.01

  6. F3P-AP-15.02: Knife-Edge Trombone with 1/4 roll up, 1/4 roll down wing 45° ¼ rolls on middle of the line 1/4 roll 1/4 roll 1/4 roll 45° The radii of the 1/8 loops are equal. F3P-AP-15.02.01

  7. F3P-AP 13.03: Loop with two rolls in opposite direction integrated F3P-AP-15.03.01

  8. F3P-AP 13.03: Loop with two rolls in opposite direction integrated Loop must be round. Roll reversal is immediate Rolls must be integrated on circular flight path of the loop. Rolls must be in opposite directions. F3P-AP-15.03.02

  9. F3P-AP 13.04: Camel Humpty-Bump with 1/4 roll up, 1/4 roll down 1/4 roll 1/4 roll F3P-AP-15.04.01

  10. F3P-AP 13.04: Camel Humpty-Bump with 1/4 roll up, 1/4 roll down ¼ rolls on middle of the lines. 1/4 roll 1/4 roll 1/4 roll All radii are equal. F3P-AP-15.04.02

  11. F3P-AP-15.05: Eight Consecutive 1/8 rolls The 1/8 rolls must have the same roll rate. eight 1/8 rolls Lines between part rolls must be short and of equal length. F3P-AP-15.05.01

  12. F3P-AP-15.06: Stall Turn with two consecutive 1/2 rolls in opposite directions up, 1/2 roll down Pivot on CG Two wing spans or more – zero points! Stop before pivot ½ roll ½ rolls centered on middle of the line. ½ roll Between part rolls in opposite direction there must be no line. F3P-AP-15.06.01

  13. F3P-AP-15.06: Stall Turn with two consecutive 1/2 rolls in opposite directions up, 1/2 roll down Pivot on CG ½ roll ½ roll on middle of the line. F3P-AP-15.06.02

  14. F3P-AP-15.07: Knife Edge Top Hat with 3/4 roll up, 1/4 roll down ½ roll ¾ roll ¼ roll F3P-AP-15.07.01

  15. F3P-AP-15.07: Knife Edge Top Hat with 3/4 roll up, 1/4 roll down ½ roll During the knife edge the wing must be in the vertical plane. All radii are equal. ¾ roll ¼ roll ¾ roll, ½ roll, ¼ roll on middle of the lines. F3P-AP-15.07.02

  16. F3P-AP-15.08: Half Cuban Eight with roll down roll F3P-AP-15.08.01

  17. F3P-AP-15.08: Half Cuban Eight with roll down roll F3P-AP-15.08.02

  18. 45° F3P-AP-15.08: Half Cuban Eight with roll down Roll on middle of the line. All radii are equal. F3P-AP-15.08.01

  19. F3P-AP-15.09: Horizontal Circle with two consecutive rolls integrated F3P-AP-15.09.01

  20. F3P-AP-15.09: Horizontal Circle with two consecutive rolls integrated Circle must be of constant radius. Roll rates must be constant. Rolls must be inside. All rolls are integrated on circular flightpath. F3P-AP-15.09.02

  21. F3P-AP-15.10: Half Horizontal Knife Edge Circle with 1/4 roll, 1/2 roll integrated, 1/4 roll 1/4 roll ½ roll integrated 1/4 roll F3P-AP-15.10.01

  22. F3P-AP-15.10: Half Horizontal Knife Edge Circle with 1/4 roll, 1/2 roll integrated, 1/4 roll 1/4 roll Half Circle must be of constant radius. During the knife edge the wing must be in the vertical plane. ½ roll integrated 1/4 roll 1/2 roll is integrated on circular flightpathof the 90° segment of the 1/2 circle. F3P-AP-15.10.02

  23. F3P-AP-15.10: Half Horizontal Knife Edge Circle with 1/4 roll, 1/2 roll integrated, 1/4 roll 1/4 roll Option ½ roll integrated 1/4 roll F3P-AP-15.10.03

  24. F3P-AP-15.11: Vertical upline with consecutive four 1/8 Torque Rolls 1/8 torque roll 1/8 torque roll 1/8 torque roll 1/8 torque roll F3P-AP-15.11.01

  25. F3P-AP-15.11: Vertical upline with consecutive four 1/8 Torque Rolls 1/8 torque roll 1/8 torque roll 1/8 torque roll 1/8 torque roll F3P-AP-15.11.01

  26. Landing sequence ( not judged, not scored ) security line Peter Uhlig,November 2013

More Related