1 / 13

Cryogenic air separation plant

Cryogenic air separation plant. HPO oxygen production. Su pervision system graphic page. here enclosed is shown as example a graphic page of skid1-skid2. Introduction.

hardye
Download Presentation

Cryogenic air separation plant

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Cryogenic air separation plant HPO oxygen production

  2. Supervision system graphic page • here enclosed is shown as example a graphic page of skid1-skid2

  3. Introduction • Our company has developed on site HPO (high pressure oxygen) oxygen production plant skids mounted achieving a purity more than 99.6 % by vol.

  4. Process description • Our oxygen generator is based on air fractioning to separate the gas on liquid form from the air. The main steps of the process are as follows 1. Air filtration and compression till to 10 bar 2. AIr cooling till to 7-10°C with a condensate separation using a chiller unit 3. Air dewatering and decarbonation using a PSA unit using activated alumina for water and molecular sieves for CO2 4. Cryogenic separation. Part of inlet air after a cooling in the Main Exchanger is expanded using a turbine to produce the frigories need for LOX production. The other part of air feed is partialy liquefied in the Main exchanger and is totaly liquefied in the bottom reboiler of the column. The liquid air is sub cooled using the top stream of the column and ,after a lamination ,will be fed into the fractioning column. The liquid oxygen will be extracted from the bottom of the column. To avoid the danger of the concentration of the hydrocarbon in the bottom of the column ands adsorbent vessel will be installed on the column. The gaseous stream of the top of the column and the stream coming from expansion turbine will be collected to the Main exchanger for frigories recovery. A air coming from the turbine will be collected on compressor suction. 5. The stream of the poore oxygen air is partially used for the rigeneration of PSA using an electrical resistance for incresing the temperature. 6. The liquid oxygen is collected into a storage tank , pumped till to 200 bar, vaporized using an atmospheric high pressure vaporizer and fed into the cylinders

  5. Process flow sheet • Here enclosed is shown the process flow sheet

  6. Plant photos • 1. Cold Box

  7. Plant photos • 2 Cold box

  8. Plant photos • 3.Cold box

  9. Plant photos • 4 Cold box

  10. Plant photos • 5. PSA and chiller skid

  11. Plant photos • 6. PSA and chiller skid

  12. P&ID’s • 1.0 Here it is enclosed the Air purification P&ID as example for the documentation

  13. Lay out • Here it is enclosed one example of HPO plant lay out

More Related