350 likes | 509 Views
Accelerator Science at Daresbury - the early ye ars. A close-up and personal view by Vic Suller (Louisiana State University/CAMD). In the beginning - there was NINA. Synchrotron 5 Gev Circumference 220 m FoDO lattice Straights 1m & 3.5m Combined function Tune values 5.25, 5.25
E N D
Accelerator Science at Daresbury -the early years A close-up and personal view by Vic Suller (Louisiana State University/CAMD)
In the beginning - there was NINA • Synchrotron 5 Gev • Circumference 220 m • FoDO lattice • Straights 1m & 3.5m • Combined function • Tune values 5.25, 5.25 • Rep rate 50 Hz • Beam power 1 kW
Accelerator Physicists at Daresbury 1966 Applied Physics Division Michael Crowley Milling Godfrey Saxon Neil Marks Ian Rabinowitz Vince Hatton Robin Tait Machine Division Tony Egginton Jerry Thompson Tom Aitken Mike Poole (Sept 1966) Vic Suller (Oct 1966) Alan Jackson (Oct 1968)
1968 Tom Aitken & Vic Suller – In the NINA control room They are setting up the Spill Servo – to extend the duration of the beam “spill”
1968 First Synchrotron Light experiment - Ian Munro + Scott Hamilton (Manchester University) Scott Hamilton and Tom Aitken inside the NINA tunnel alongside the SR beam line
1968 First Synchrotron Light experiment - Notice the pile of lead bricks enclosing the experiment - very inconvenient!
1972 Two Beams into the DedicatedSynchrotron Light Facility Mike and John West in the SRF
Mike and Alan Jackson -shared an office for 15 years Alan's big NINA project was the diamond target. Mike's desk looks remarkably tidy - the paper mountain was yet to come!
1968 Design Study for the NINA Booster To provide a future for the lab, a 20 GeV synchrotron was proposed, tunneling under the Daresbury hillside. The design study was made by the Applied Physics division. In 1969 the Government announced that in future all UK high energy physics would be done at CERN. But the NSF van de Graff was approved. The Machine division became responsible for all NINA accelerator physics.
Mike & Neil Marks at the NINAcontrol desk Richard Walker can also be seen assisting – which puts this photo at 1977.
SRS replaced NINA The SRS was approved in 1975, although NINA kept running until 1977
1975 Computer Controlled Magnet Measurements Mike & Richard Walker develop a computer controlled Magnet Measurement system to automatically take and record precision field maps of the SRS magnets.
Computer Controlled Magnet Measuring Facility Celebrating the last SRS magnet to be measured circa 1979.
Undulator Spectrum in the Visible For diagnostic purposes the undulator spectrum was shifted from the normal VUV into the visible. This was done by ramping the SRS energy down from injection (600 MeV) to 450 MeV.
1987-92 HELIOS Compact Source • Ring energy 0.6 Gev • Bending field 3.5 T • Bend radius 0.57 m • Beam current 300 mA
HELIOS linac - now in Louisiana The HELIOS linac has been acquired by CAMD and will be installed with the existing linac to raise the injection energy from 200 to 300 MeV.
Mike - the Sportsman Mike's Sports:- Cricket Soccer (Everton) Table Tennis Golf Bowls (?) With George Wright and the Bowling Trophy
Mike – Table Tennis action This was taken in the DL “huts” in the early ‘70s.
Mike in the Daresbury Lab Cricket Team1970 AEA knock out winners
MikeCongratulations for your many contributions to accelerator science in the UK Best Wishes for a long and active Retirement