1 / 48

AE4-S02 Spacecraft Mechatronics Displacement Sensors

AE4-S02 Spacecraft Mechatronics Displacement Sensors. Dr. ir. W. Jongkind TU-Delft 2004 – 2005. Introduction (1). Potentiometers. Linear as well as rotary potentiometer are applied. Potentiometers are used in situations where accuracy is not of major importance,

haru
Download Presentation

AE4-S02 Spacecraft Mechatronics Displacement Sensors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. AE4-S02 Spacecraft MechatronicsDisplacement Sensors Dr. ir. W. Jongkind TU-Delft 2004 – 2005 Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  2. Introduction (1) • Potentiometers. Linear as well as rotary potentiometer are applied. • Potentiometers are used in situations where accuracy is not of major importance, • Accuracies may vary from 0.3 % to 5 %. • Device is normally cheap. • Incremental Encoders.Linear and rotary incremental encoders are applied. • Rather inexpensive devices. • The performance depends on the resolution of the encoder slit pattern. • They can can be very accurate indeed. Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  3. Introduction (2) • Absolute Encoders. Again linear and rotary absolute encoders exist • The code pattern is in the majority of cases a Gray code pattern, binary code patterns are much less common • Electrical Transformers • For very accurate linear displacement measurements often Linear Variable Differential Transformers (LVDT)are applied • The rotary displacement can be accurately measured with rotary electrical transformer devices such as the Resolver or Synchro Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  4. Making the Right Choice • The following requirements and constraint should be addressed: • Required resolution • Required accuracy • Environmental constraints • Integration aspects • Availability • The selected displacement sensor is the most important factor and deciding for overall performance of a system especially when the device forms part of a feedback loop Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  5. Potentiometer (1) • Operating range from 1 mm to 1m Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  6. Potentiometer (2) Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  7. Encoders • Typically used as shaft angle encoders • The device output is in digital form • Digital output needs in general to be transformed with the aid of a computing device to obtain magnitude and direction of movement as well as position or angle information • Consist of a pattern impressed upon a part of the system that characterizes the motion • Two main classes of optical encoders: • Absolute encoders and • Incremental encoders • For velocity measurement nearly always incremental encoders are applied Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  8. Incremental Encoder Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  9. Readout System Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  10. Sense of Rotation Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  11. Linear Encoder Codes Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  12. Circular Encoder Codes Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  13. Gray Encoder Output Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  14. Encoder Construction Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  15. Incremental Encoder Construction Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  16. Gray EncoderConstruction Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  17. Transformer Based Displacement Sensors • Linear Variable Differential Transformer • Synchro’s and Resolvers Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  18. Linear Variable Differential Transformer Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  19. Coil Voltages Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  20. Coils in Series Opposition Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  21. LVDT Animation Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  22. Coil Voltages Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  23. Amplitude versus Displacement Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  24. Output of an LVDT • Starting at the primary or excitation side of the LVDT: Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  25. Signal conditioning Scheme Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  26. Signal Conditioning of a LVDT (1) • Location of the displacementtransducer coil • consider the phase of the output • as well as the magnitude • Theoutput phase of the position sensor is compared with theexcitation phase and it can be: • In or out of phase with theexcitation, depending upon which half of the coil the center ofthe armature is in Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  27. Signal Conditioning of a LVDT (2) • This type of signal conditioning systems is available in IC form. • The Analog Devices type AD 598 IC uses this technique. Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  28. Principle of a Resolver Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  29. Resolver Operation Principle (1) • The rotor of the resolver is exited by an ACreference voltage of 400 Hz typically • As the rotor turns and thestator remains static an angular difference in orientation betweenrotor and stator develops: • va=Kvexitesinωtsinθ • vb=Kvexitesinωt cosθ • The shaft angle θ is obtained by first multiplying theoriginal output signals by cosφ and sinφrespectively Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  30. Resolver Detector System Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  31. Resolver Operation Principle (2) • Kvsinωtsinθcosφ and Kvsinωt cosθcosφ • Subtractinggives: Kvsinωt sin(θ-φ) • (θ-φ) is the angular error • Demodulated gives: A sin(θ-φ) • Signalto a phase sensitive detectorfollowed by an integrator and a Voltage Controlled Oscillator (VCO) • Detection of angle θ is based on nulling the error angle (θ-φ) Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  32. Resolver Detector System Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  33. Resolver Operation Principle (3) • The VCO controls an up/down counter containingthe digital equivalent of angle θ • The whole manipulation isperformed in closed loop fashion • Since the difference between θ and φ is nulled, theup/down counter supplies θ • In practice allcalculations are performed on--chip such as the AD2S90 from AnalogDevices Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  34. Resolver Detector System Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  35. Excitation and Read-Out Chipset Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  36. Principle of a Synchro Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  37. Application of Displacement Sensors (1) • Application ofLVDT's • On SOHO the LASCO experiment is flown • The device requires very accurate positioning measurement. This accurate position measurement isobtained by applying LVDT's • The LVDT's were able to measure with aresolution of  0.01 μm over a range of  30 m • An other experiment on board of SOHO, the SUMER EUVSpectrometer also applies a LVDT for linearposition measurement. This sensor has aresolution of 12 bits Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  38. LASCO Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  39. SOHO-LASCO Experiment Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  40. SOHO-LASCO Experiment Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  41. SOHO LASCO LVDT Characteristics Stroke in micrometers Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  42. Application of Displacement Sensors (2) • Application of Resistive Encoders • The CAPS instrument on the Cassini spacecraftisequipped with a resistive encoder to measure the angular positionof the instrument Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  43. Application of Displacement Sensors (3) • Application of Optical Encoders: • In the pointing and scanning mechanism for ATLID and SPOT5 anoptical encoder is applied to obtained angularposition. The resolution is 21 bits,its static accuracy is 15 μ rad and its bandwidth is a fewhundred Hz • For angular position measurement of a tether reel use of an incremental encoder generates 4000 pulses per revolution on two channels in quadrature. • In the scan mechanism for the Master Limb SoundingInstrument it is proposed to measure the angle ofthe elevation axis with an incremental encoder Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  44. Application of Displacement Sensors (4) • Scanning mechanism of the MIPASInterferometer on board ENVISAT an incremental encoder isused. The outer diameter of the encoder is 182 mm containing 18000equally spaced lines. The accuracy is 1 arcsec • An 21 bits optical encoder is applied in a pointingmechanism for a Earth Observation Satellite. The resolution is 3μrad, precision over a range of 3600 is better than 15 μrad • The scan mechanism of the Atmospheric LidarInstrument makes use of an encoder • In the scanning mechanism for SPOT5a high resolutionpointing and scanning mechanism was required. The encoder applied had 21 bit resolution Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  45. Encoder Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  46. Application of Displacement Sensors (5) • Resolver Applications • The Infrared Atmospheric Sounder Interferometer contains the IASI instrument. Part of theinstrument is a scan sub-system for a mirror. The shaft angle ismeasured by a Resolver • The resolver assembly accuracy is 10-4 rad • The Global Ozone Scan Monitoring Experimentalso contains a resolver • Accuracy is 10 arcsec • European Robotic Arm (ERA) is equipped with a 6040 Rotasyn Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  47. Resolver Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

  48. Rotasyn Resolver Dr. ir. W. Jongkind AE4-S02 Spacecraft Mechatronics Displacement Sensors

More Related