Build a useful duct tape dispenser

Make a useful duct tape dispenser using tin can Information Shared By: www.hays-nyc.com

Well, there is hardly a man who would say, ‘I don’t think duct tape can fix that. Since, this sticky silver adhesive tape with durable fabric coating dubbed duct tape is a fix it solution for almost everything from mechanical to packaging.

Material Required: • A normal sized tin can that fits inside the roll of a duct tape • A plywood board • Few assorted drywall screws • Saws, drills and bits

Cutting the board, then make a hole to allow a can to fit in it The Plywood board (you can use any kind of wood) should be cut to the size large enough to accommodate a roll of duct tape.

Screw the additional wooden plans on either side Side pieces are to be screwed in place. One to conceal the holes and second to hold the tape roll in place

Now is the time to add a cut-off bar to the dispenser A duct tape dispenser would not fulfill its purpose without a cut-off bar to cut tape pieces to a desired length. Attach a sharp blade to the wooden cut-off bar and secure it to the dispenser towards the bottom.

Changing the duct tape in dispenser? It may seem tricky, but the task of changing tape in your newly constructed DIY duct tape dispenser is simple.

Wonderful and inexpensive duct tape dispenser is ready for action.

Thanks!!!

Build a useful duct tape dispenser