1 / 28

GASU/PDU MRR Part 2

Gamma-ray Large Area Space Telescope. GASU/PDU MRR Part 2. GLAST Large Area Telescope: B. Estey, Production SLAC esteyb@slac.stanford.edu (650) 926-8531. Parts, Materials, and Processes. EEE Parts All EEE parts have been approved for use by the Program Parts Board

hei
Download Presentation

GASU/PDU MRR Part 2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Gamma-ray Large Area Space Telescope GASU/PDU MRR Part 2 GLAST Large Area Telescope: B. Estey, Production SLAC esteyb@slac.stanford.edu (650) 926-8531

  2. Parts, Materials, and Processes • EEE Parts • All EEE parts have been approved for use by the Program Parts Board • Status of PDU Box Level Parts Qualification, Rev. C1 (highlighted yellow items=part approved, not in use): • Some columns have been hidden to assist in presentation reading

  3. Parts, Materials, and Processes • EEE Parts, cont’d • Status of PDU CCA Parts Qualification, Rev. Q (highlighted yellow =part approved, item not in use): • Some columns have been hidden to assist in presentation reading

  4. Parts, Materials, and Processes • EEE Parts, cont’d • Status of PDU CCA Parts Qualification, Rev. Q, cont’d (highlighted yellow =part approved, item not in use): • Some columns have been hidden to assist in presentation reading

  5. Parts, Materials, and Processes • EEE Parts • Status of GASU Box Level Parts Qualification, Rev. C (highlighted yellow items=part approved, not in use): • Some columns have been hidden to assist in presentation reading

  6. Parts, Materials, and Processes • EEE Parts, cont’d • Status of GASU CCA Parts Qualification, Rev. Q (highlighted yellow items=part approved, not in use): • Some columns have been hidden to assist in presentation reading

  7. Parts, Materials, and Processes • EEE Parts, cont’d • Status of GASU CCA Parts Qualification, Rev. Q, cont’d (highlighted yellow items=part approved, not in use): • Some columns have been hidden to assist in presentation reading

  8. Parts, Materials, and Processes • EEE Parts, cont’d • Status of GASU PS CCA Parts Qualification, Rev. H (highlighted yellow items=part approved, not in use): • Some columns have been hidden to assist in presentation reading

  9. Parts, Materials, and Processes • Materials • All Materials have been approved by the Program MPRB in accordance with LAT-SS-00107, LAT Mechanical Parts Plan • GLAST/LAT Material Usage Agreement #002 (MAR DID No. 313; LAT Document # LAT-TD-04756-01)- Approved 9/13/04 • Processes • All processes have been reviewed and approved by the Program MPRB in accordance with LAT-SS-00107, LAT Mechanical Parts Plan

  10. Procurement Status • Assembly Subcontractor • Aeroflex, Inc., Colorado Springs, Colorado was awarded the contract to provide the assembly service and CCA level thermal cycling for the PDU and GASU (Reference LAT-PS-04171, SOW LAT PDU and LAT-PS-03081, SOW LAT GASU) • EEE Parts • All EEE parts are SLAC furnished and have been procured for the PDU and GASU • Outstanding receipt of Omnirel Regulator expected 2/25/05 • Part no. OMR9604SCK • Miscellaneous Subassemblies • Internal harness and cable assemblies due ~ 3/14/05 • Metal Fab Parts and Fasteners • All Metal Fab parts and Fasteners are SLAC furnished and have been procured and received for the PDU and GASU • PWBs • The PWBs for PDU and GASU are SLAC furnished and have been procured and received. Coupons for boards being used for flight have all successfully passed testing.

  11. Procurement Status • FPGA Programming • Programming of the FPGAs has been contracted to ACTEL and is complete for 1 box each PDU and GASU. Remaining parts will be programmed after some level of confidence testing of the first article CCAs. • Materials • Assembly shop floor materials are furnished by Aeroflex in accordance with drawing and SOW requirements (adhesives, conformal coating, wire, primer, etc.)

  12. Manufacturing Facilites • Assembly contract has been awarded to Aeroflex, Inc., located in Colorado Springs, Colorado • Aeroflex specializes in the Manufacturing of Micro Electronic and Circuit Card assemblies. Aeroflex fabricates assemblies for aerospace, defense and commercial applications. They are an ISO 9001 (DSCC) certified company, founded in 1990 which merged with UTMC in 1996 • A Quality Survey and Process Review was was conducted by SLAC and NASA Product Assurance on January 26, 2005 • Certifications / Qualifications: • - ASQ Rocky Mountain Quality award • - ISO 9001:2000 certified by the Defense Supply Center, Columbia • Aeroflex performs to the intent of the following documents, assuring Quality and Workmanship Acceptability: • MIL-STD-2000A • IPC-A-610 CLASS 3 • MIL-PRF-38535 • IPC/EIA J-STD-001C • NASA 8739 series • NHB 5300 • MIL-STD-1686 • MIL-HDBK-263 • EIA-625 • ANSI/ESD S20.20-1999

  13. Manufacturing Facilites

  14. Manufacturing Facilites

  15. Manufacturing Facilites

  16. Manufacturing Facilites

  17. Manufacturing Process Flow-Aeroflex

  18. Manufacturing Process Flow-Aeroflex

  19. Manufacturing Process Flow-Aeroflex

  20. Manufacturing Process Flow-Aeroflex • A flow similar to PDU for GASU is under construction • All routers will be reviewed and approved by SLAC prior to production start

  21. Configuration Management • Required changes to documentation during the manufacturing phase at Aeroflex will be immediately documented on an NCMR and forwarded to SLAC for disposition • All outstanding changes to documents will be incorporated and a new revision released into LAT DOCs prior to final inspection at each manufacturing level (CCA, Module)

  22. Configuration Management • All change notices will include full disposition of hardware Disposition of Hardware

  23. Thermal Cycle Requirements at CCA Level Figure 1. Vibration Levels, Duration, and Spectra

  24. PDU/GASU Qualification and Acceptance Test Matrix

  25. Production Schedule

  26. Production Schedule

  27. Production Schedule

  28. Production Schedule

More Related