1 / 24

Plasfit - plastic push-in fittings

Plasfit - plastic push-in fittings. For the drinks dispense and brewing industries. Plasfit plastic push-in fittings. Designed for use in drinks dispense and brewing industries Quick simple connection Highly resistant to accidental tube removal

hennig
Download Presentation

Plasfit - plastic push-in fittings

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Plasfit - plastic push-in fittings For the drinks dispense and brewing industries

  2. Plasfit plastic push-in fittings • Designed for use in drinks dispense and brewing industries • Quick simple connection • Highly resistant to accidental tube removal • Use with food grade plastic tube and annealed stainless steel tube • Hygienic materialsBody acetal/M90- 04 Kematal.Grab ring stainless steel 301S21‘O’ Ring food grade nitrile

  3. Plasfit component parts • Release sleeve • Grab ring • Backing washer • ‘O’ Ring • Tube stop • Fitting body

  4. Range of tube sizes • Tube sizes metric5 mm o/d6 mm o/d 8 mm o/d 10 mm o/d 12 mm o/d • Tube sizes inch3/16 inch o/d 1/4 inch o/d5/16 inch o/d 3/8 inch o/d 1/2 inch o/d

  5. Range of thread sizes • Taper thread sizesR 1/8R 1/4R 3/8R 1/2 • Parallel thread sizes G 1/8G 1/4

  6. Tube and Fitting assembly

  7. 900 Tube preparation • For plastic tube use a standard tube cutter to give a square end • Ensure that the tube end is clean and free from surface damage • For metal tube use correct cutting equipment and ensure the tube end is free from burrs

  8. Connecting the tube

  9. Connecting the tube • Push the tube through the release sleeve into the fitting • Continue pushing firmly through the teeth of the grab ring and through the ‘O’Ring up to the tube stop • Pressure can then be applied

  10. Connecting the tube • Push the tube through the release sleeve into the fitting • Continue pushing firmly through the teeth of the grab ring and through the ‘O’Ring up to the tube stop • Pressure can then be applied

  11. Connecting the tube • Push the tube through the release sleeve into the fitting • Continue pushing firmly through the teeth of the grab ring and through the ‘O’Ring up to the tube stop • Pressure can then be applied

  12. Connecting the tube • Push the tube through the release sleeve into the fitting • Continue pushing firmly through the teeth of the grab ring and through the ‘O’Ring up to the tube stop • Pressure can then be applied

  13. Disconnecting the tube

  14. Disconnecting the tube • Turn off and exhaust the pressure • To open the teeth of the grab ring, push the release sleeve firmly into the fitting and hold it there • Pull out the tube then release the sleeve

  15. Disconnecting the tube • Turn off and exhaust the pressure • To open the teeth of the grab ring, push the release sleeve firmly into the fitting and hold it there • Pull out the tube then release the sleeve

  16. Disconnecting the tube • Turn off and exhaust the pressure • To open the teeth of the grab ring, push the release sleeve firmly into the fitting and hold it there • Pull out the tube then release the sleeve

  17. Disconnecting the tube • Turn off and exhaust the pressure • To open the teeth of the grab ring, push the release sleeve firmly into the fitting and hold it there • Pull out the tube then release the sleeve

  18. Disconnecting the tube • Turn off and exhaust the pressure • To open the teeth of the grab ring, push the release sleeve firmly into the fitting and hold it there • Pull out the tube then release the sleeve

  19. Plasfit range of fittings forms

  20. Plasfit adaptors • Straight adaptors • Internal adaptors • Straight stem adaptors • Swivel elbow adaptors • Swivel side tee adaptors • Swivel tee adaptors

  21. Plasfit tubing connectors • Straight connectors • Reducing connectors • Elbow connectors • Sweep elbow connectors • Stem elbow connectors • Tee connectors • Two way splitters • Three way splitters • Parallel splitters

  22. Plasfit fittings • Bulkhead connectors • Nippled stem connectors • Straight nippled adaptors • Tailpiece stem adaptors • Straight stem connectors • Plugs • Sleeve depression tool • for poor access areas • Snap-on cover • place over the tube • make the joint • snap the cover over the fitting body to increase the tamper resistance

  23. Plasfit fittings • Bulkhead connectors • Nippled stem connectors • Straight nippled adaptors • Tailpiece stem adaptors • Straight stem connectors • Plugs • Sleeve depression tool • for poor access areas • Snap-on cover • place over the tube • make the joint • snap the cover over the fitting body to increase the tamper resistance

  24. End

More Related