Bentonite to Polymer Slurry, the Sustainable Route to Building Reinforced Concrete Diaphragm Walls

1. Bentonite to Polymer Slurry, the Sustainable Route to Building Reinforced Concrete Diaphragm Walls Bentonite has been a crucial construction element in building reinforced concrete diaphragm walls for deep basement structures. But over the years, civil construction companies have started using polymer in their excavation fluids and slurry. Read on to understand the importance of both the materials in constructing concrete diaphragm walls, the differences between them, and how polymer is growing as a more sustainable option in excavation activity while bentonite remains the foolproof back plan for civil engineers. What are Bentonite and Polymer Slurries?

2. Bentonite clay is formed by the alteration and weathering of volcanic ash and is abundant in the clay mineral montmorillonite, which swells when mixed with water and possesses exchangeable irons on the surface that produce thixotropic suspensions. Typically mined in Rajasthan India, it is extensively used in diaphragm wall construction as an excavation fluid. Bentonite clay (in powder form) is combined with water in a colloidal mixer where the clay particles bond with one another to form a gel- like texture. The mixing process continues till the standard quality is achieved for the slurry. Polymer slurry is prepared with the combination of water and hydrophilic superabsorbent polymers like polyethylene glycol, polyvinyl carboxymethylcellulose to form a thick, viscous mix. These water-soluble polymers have been used to stabilise deep excavations for reinforced concrete diaphragm wall trenches. When alcohol, or compared with conventional bentonite slurries,this engineered fluid is known to offer a variety of advantages including smaller site footprint and lesser environmental impact. How is a bentonite slurry or polymer slurry prepared? The slurry is prepared with the aim of attaining maximum hydration of bentonite clay or polymers. Hence, it must be slowly added into the mixing water to ensure all particles are irrigated and do not get lumped. Potable fresh water should be used in the mixing process to obtain the best results. Alongside this a chemical analysis, as listed out by the Indian Standard Code of Practice for Construction of Diaphragm Wall, must be conducted to ascertain the suitability of water. If needed, chemical treatment is given to the water before its usage. The preparation of the slurry is done either in batches or in a depending on the type of equipment used. The components are added in a high shear mixer through a simple venturi-hopper. To assure the dispersion of all the individual particles in the mixing water, the mixing equipment must generate sufficient shear. Once prepared, it is moved to storage tanks, continuous process,

3. and from there they are supplied to the excavation point, to be filled into the cavity of the soil. This entire process, including the testing is done on-site by the civil construction company assigned to build the diaphragm wall. How are the bentonite slurry and polymer slurry used? As the excavation for the concrete diaphragm wall begins, the bentonite or polymer fluid is used as excavation fluid and it is carefully poured inside to hold the excavated regions so as to continue excavating. The bentonite and polymer slurry supports the excavation by exerting hydrostatic pressure on its walls, hence preventing it from collapsing. It remains in the excavated area and does not flow into the soil, thereby acting as a sealant. It further suspends debris and prevents sludgy layers from building up at the base of the excavation. Once excavation is done, the slurry forms a gel layer around the soil, preventing the required depth of it from collapsing. The stopends are then attached, the cage wall is lowered into the excavated portion, concrete is poured into the cage, and the slurry mix pumped back outside or returned into the storage tanks. What differentiates bentonite slurry to polymer slurry? Bentonite slurry is considered to be one of most foolproof excavation fluids in building concrete diaphragm walls as it can be used in all forms of soil. While using polymer slurry, civil construction companies must ensure that the sand content in the total soil should be just 2%. Though the cost of polymer is generally more expensive than bentonite because of the additional chemical elements involved in its formation, the use of polymer is increasing. Polymers slurry can be reused as many times required as it doesn’t absorb contaminants and over 60% can be retrieved from every project. On the contrary, bentonite slurry loses its quality after 2-3 uses and only 40% of the mix can be retrieved after every project.

4. The disposal cost of bentonite is quite high as the site becomes full of slush after excavation. Manpower and additional time is required for muck removal and disposal at regular intervals. Since polymer has been proven to be a sustainable and more environmentally efficient material to be used in construction of reinforced diaphragm walls, civil construction companies like Heritage Infraspace Pvt Ltd. have begun using bentonite as their plan B. To know more about our concrete diaphragm wall projects and explore business opportunities with us, reach out to us on info@heritageconstruction.in. Content source