1 / 6

WHY USE FILTERED WATER ?

WHY USE FILTERED WATER ? Pure base = Ideal feed formula that gives plants exactly what they want Increased nutrient uptake and less chance of lockout and deficiencies. Less nutrient and salt build up Remove minerals = Stabilize PH

herman
Download Presentation

WHY USE FILTERED WATER ?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. WHY USE FILTERED WATER? • Pure base = Ideal feed formula that gives plants exactly what they want • Increased nutrient uptake and less chance of lockout and deficiencies. Less nutrient and salt build up • Remove minerals = Stabilize PH • Removing unknown contaminants and toxins from plant tissue and fruits….. lead, mercury, pharmaceuticals, bacteria, etc. • Organic growers, beneficial micro-organisms, higher quality and larger harvests.

  2. * • Benzene - gasoline or oil spills on the ground surface or from leaking underground fuel tanks. • Dichloromethane - industrial solvent • Trichloroethylene - used in septic system cleaners • Tetrachloroethylene - dry-cleaning industry.

  3. Reverse Osmosis • Removes 94-99% of PPM • Produces the purest water • Slow flow rates – 4 to 30 GPH • 3:1 drain to product ratio – why???? • Flow rate dependent on pressure, temp., and PPM • - Rated at 60 psi (4 bar), 500ppm TDS municipal water, 77°F (25°C) - • Higher start up and maintenance costs

  4. Problem Water • More than 10 grains or 170 PPM Hardness • Excessive Iron or Hydrogen Sulphide (sulfur) • Silica, brackish water, boron, arsenic • Bacteria, Viruses, Cysts

  5. FAQ – Reverse Osmosis • Q. Low flow from Reverse Osmosis • Low line pressure, high PPM, improper setup, knowledge of RO • Q. Good flow at first and then a trickle • Excessive minerals (hardness), iron, sulfur, high PPM, not changing pre-filters • Q. Good flow at first and then increased flow and high PPM • Did not change carbon pre-filter when needed. City water users must change carbon pre-filter every 1,500 gallons of product water • Q. Well water vs. city water • Well water needs KDF85 or other pre-filtration like softener, city water needs carbon or KDF85. Water test important • Q. Waste to product water ratio • A. 3:1 but depends on pressure, etc. • Q. Check PPM of product water to change pre-filters • A. incorrect. Pre-filters do NOT remove PPM, only membrane does

  6. SELLING POINTS • Plant Problems? Lockout? Deficiencies? • DO NOT offer band aids. Must start with pure base! • Increase in quality and quantity of harvests • Essential for organic growers and health conscious gardeners • Anyone who has used purified water will NEVER go back to tap

More Related