1 / 18

August 08, 2011

Download Tool SOP For PROLiNK TA8 Honeycomb 3.2 Upgrade. August 08, 2011. Tools and Software Required. TA8 Android Tablet 01 x Micro USB cable 01 x Safety Pin (or pointed pin with 1mm diameter) 01 X PC (Win XP and above) Download Nvidia driver and Honeycomb 3.2 image from this link

hetal
Download Presentation

August 08, 2011

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Download Tool SOP For PROLiNK TA8 Honeycomb 3.2 Upgrade August 08, 2011

  2. Tools and Software Required • TA8 Android Tablet • 01 x Micro USB cable • 01 x Safety Pin (or pointed pin with 1mm diameter) • 01 X PC (Win XP and above) • Download Nvidia driver and Honeycomb 3.2 image from this link http://www.prolink.com.sg/download/nvidia_driver_hc3.2.zip

  3. Boot-recovery Driver Installation • Download the Duke Update Utilty and the firmware from the Download section of www.ekoore.com • Install android_tegra_250_FroyoOV5650v1.msi , to your PC • Double click the “android_tegra_250_FroyoOV5650v1.msi”

  4. Boot-recovery Driver Install • Click the “Next” to continue

  5. 1. 2. Boot-recovery Driver Install • Select “I accept the terms in the License Agreement” • Click “Next”

  6. Boot-recovery Driver Install • Click the “Typical”

  7. Boot-recovery Driver Install • Click the “Install”

  8. Boot-recovery Driver Install • Click the “Finish”

  9. Boot-recovery Driver Install • After the installation, you can find the APX driver in C:\Program Files\NVIDIA Corporation\android_tegra_250_Froyov1\usbpcdriver

  10. Boot-recovery Driver Install • Select and copy all the files under the Driver > Patch folder

  11. Boot-recovery Driver Install • Paste all the files to “C:\Program Files\NVIDIA Corporation\android_tegra_250_Froyov1” folder • Copy and Replace all the conflicts files

  12. Boot-recovery Driver Install • Power off the tablet • Connect up the PC and tablet with the Micro USB cable • Press the Recovery button with the safety pin + Power button at the same time for 3 secs and let go • Check if there is an USB device named “!APX” detected on your PC device manager

  13. Boot-recovery Driver Install • Right click “!APX” and select “Update driver” > Browse my computer for driver software > C:\Program Files\NVIDIA Corporation\android_tegra_250_Froyov1\usbpcdriver > Next

  14. Boot-recovery Driver Install • After installation, a USB device named “NVIDIA USB Boot-recovery driver for Mobile devices” would be found on your PC Device Manager

  15. Outline • Boot-recovery Driver Install • Image Download

  16. Image Download • Power OFF the tablet • Connect up the PC and tablet with the Micro USB cable • Press the Recovery button with the safety pin + Power button at the same time for 3 secs and let go • A USB device named “NVIDIA USB Boot-recovery driver for Mobile devices” would be found on your PC Device Manager

  17. Image Download • Open 0.J05401.00501GEN-enFR.110804.0 folder • Double click on the “nvflash.bat”

  18. Image Download • Press any key to start the image download

More Related