1 / 16

Memory

Memory. Section 7.2. Types of Memories. Definitions Write: store new information into memory Read: transfer stored information out of memory R andom- A ccess M emory (RAM) Can read and write Read-Only-Memory (ROM) Read only. Interesting Facts.

holden
Download Presentation

Memory

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Memory Section 7.2

  2. Types of Memories • Definitions • Write: store new information into memory • Read: transfer stored information out of memory • Random-Access Memory (RAM) • Can read and write • Read-Only-Memory (ROM) • Read only

  3. Interesting Facts • Interesting fact of RAM: the time it takes to transfer information to or from any desired random location is always the same • A word =a group of bits • A group of 8 bits is called a byte.

  4. Two Types of RAM • Static RAM (SRAM): Stored information remains valid as long as power is applied to the unit. • Dynamic RAM (DRAM): Stores binary information in the form of electric charges on capacitor provided inside the chip by MOS transistors.

  5. 74LS189 RAM 64 bits=16 4-bits words.

  6. Block Diagram of a Memory Unit

  7. 74LS189 RAM [A3,A2,A1,A0]=address inputs [D3,D2,D1,D0]=data inputs [S3,S2,S1,S0]=outputs ME,WE control the direction of transfer VCC=power GND=ground

  8. Logic Diagram memory cell Each word is enabled by the 4-input AND

  9. Write →Read

  10. Logic Diagram memory cell Each word is enabled by the 4-input AND

  11. Switch Characteristics

  12. Switching Time Waveforms 17 nS 23 nS A negative hold time means that the address/data can change before the rising edge of WE because the there is internal delay through the chip. -7 nS for address -14 nS for data

  13. Write (ME=0, WE=0) D1 1 D2 1 D3 1 D4 [hi Z?] 1 1 0 0 0

  14. READ (ME=0, WE=1) 0 1 1 Complement of data stored 0

  15. HOLD (ME=1, WE=X) X 0 Hi-Z output 1

  16. Memory Description in Verilog Need 6 bits address for 26=64 words. memory depth: 64 words word length 4-bits

More Related