1 / 7

Wireless Central Control Unit

Wireless Central Control Unit. 2. 1. 3. 4. Wireless Central Control Unit. 1 Mains on/off switch A switch to switch on and off the CCU. 2 Menu display A 2x16 character LCD display gives information about the CCU. It is also used to configure the system.

holli
Download Presentation

Wireless Central Control Unit

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wireless Central Control Unit DCNW Tech PT CCE

  2. 2 1 3 4 Wireless Central Control Unit • 1Mains on/off switch A switch to switch on and off the CCU. • 2Menu display A 2x16 character LCD display gives information about the CCU. It is also used to configure the system. • 3Menu button A turn-and-push button to operate the menu in combination with the display. • 4Monitoring headphones output A 3.5 mm jack socket to connect headphones for audio monitoring purposes. I&U Instructions DCNW Tech PT CCE

  3. 6 7 5 10 11 12 14 8 9 12 11 13 Wireless Central Control Unit • 5RS232 ports 2 x 9-pin Sub-D connector for: • Open interface (for remote control functions) • Terminal (service diagnostics) • Full protocol (direct PC control) • Camera Control • 6Mains inlet A socket to connect the CCU to the mains. • 7Ground A connection to mechanically ground the CCU. I&U Instructions DCNW Tech PT CCE

  4. 10 11 12 14 8 9 12 11 13 Wireless Central Control Unit • 8Optical network Two sockets to connect the CCU to the optical network for connecting other optical devices to the system. Each socket has a red LED that indicates overload situations. Note: Even if only one of the optical network sockets has a power overload, both overload LEDs will be activated and the power will be removed from both sockets. • 9DCN sockets Two sockets to connect the DCN Next Generation units to the CCU. Each socket can supply 65 Watt and has a red LED that indicates overload situations. • 10Fault contact A potential-free change-over relay contact that indicates the correct operation of the CCU. I&U Instructions DCNW Tech PT CCE

  5. 10 11 12 14 8 9 12 11 13 • 11Audio input Two audio inputs to insert analogue audio signals that originate from external audio sources into the system.` • 12 Audio output Two audio outputs to extract analogue audio signals from the system. Wireless Central Control Unit I&U Instructions DCNW Tech PT CCE

  6. Wireless Central Control Unit 10 11 12 14 8 9 12 11 13 • 13Voltage selector to select the local mains voltage 115/230. • 14Fuse holder with a fuse that protects the power supply of the CCU. I&U Instructions DCNW Tech PT CCE

  7. Product Technology End of section DCNW Tech PT CCE

More Related