1 / 9

Wireless Central Control Unit Configuration Guide for WCCU 4J Menu

Learn how to configure your Wireless Central Control Unit for optimal performance and functionality, including setting system identity, adjusting audio packet repetition, and managing the wireless network. Follow step-by-step instructions to initialize the system and utilize different modes efficiently.

kkwon
Download Presentation

Wireless Central Control Unit Configuration Guide for WCCU 4J Menu

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wireless Central Control Unit menu structure DCNW Tech IO Configuring WCCU

  2. 4A Wireless Mode Menu • ON The wireless networkis enabled. The delegates and chairman can use thewireless devices that: • Have a subscription, and • Are enabled. • Sleep The wireless network is inthe sleep mode. Use the sleep mode to increase the timebetween charge of the batteries (for example, during along break in a discussion or conference). • OFF The wireless network is disabled. All wireless devices with a subscription are automatically disabled. • Subscription The wirelessnetwork is in the subscription mode. Use thesubscription mode to give subscription to extra wirelessdevices DCNW Tech IO Configuring WCCU

  3. 4J Wireless Menu • 4Ja Auto Mic Off • When this function is enabled, the microphones ofthewireless devices are automatically disabled whenthey are not used for 30 seconds. • Can be used to increase the time betweencharge of the batteries of the wireless contributiondevices. DCNW Tech IO Configuring WCCU

  4. 4J Wireless Menu • 4Jb System ID • Sets the identifier of the system • Adjacent systems must have a different systemidentities (and different carriers) • Set the correct system identity before you do theinstallation of the system. Whenyou change the system identity after you did theinitialization, you must do the initialization again. = System A Carrier 0 = System B Carrier 1 = System C Carrier 2 DCNW Tech IO Configuring WCCU

  5. 4J Wireless Menu • 4Jc Repetition • Sets the number ofrepetitions of audiopackets. • If the repetition rate of audio packets is increased: • The audio quality of the wireless network canincrease. • The audio delay increases. • If the repetition rate of audio packets is decreased: • The audio quality of the wireless network candecrease • The audio delay decreases. • Note : Only speakers who listen to themselves canhave a problem with anincreased audio delay DCNW Tech IO Configuring WCCU

  6. System ID12 System ID8 = System A System ID3 = System B = System C 4J Wireless Menu • 4Jd WAP • In this menu the carrier of the WAP can be set. • Adjacent systems must havedifferent carriers (and different System Identities). • You can change the carrier after you did theinitialization of the system Note : When you change the carrier during a discussion orconference, the wireless devices temporarily cannot findthe network. DCNW Tech IO Configuring WCCU

  7. Initialize the system • Step 1 - De-Initialize all units connected to the DCN system. All LEDs on all DCN units come on. • Step 2 - Erase the subscriptions of all wireless devices. All LEDs on all wireless devices come on. • Step 3 - Set the Wireless CCU into the Subscription mode. I&U Instructions DCNW Tech IO Configuring WCCU

  8. Initialize the system • Step 4 -Push the microphone button of each active device inthe DCN. When the central control unit gives anaddress to an active DCN device, the LEDs of theactive device go off. • Step 5 -Push the microphone button of each wireless device.All LEDs on the all wireless devices come on. Whenthe central control unit gives a subscription to thewireless device, the LEDs of the wireless device gooff. • Step 6 - Set the Wireless mode to On DCNW Tech IO Configuring WCCU

  9. Configuring the Wireless CCU End of section DCNW Tech IO Configuring WCCU

More Related