1 / 63

hotEx RADIUS Manager Installation

hotEx RADIUS Manager Installation. hotEx RADIUS Manager Network Diagram. Client PC. Connect client PC connection diagram. 192.168.1.XX. 192.168.1.55. 192.168.1.XX. 192.168.1.XX. Note:

hosea
Download Presentation

hotEx RADIUS Manager Installation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. hotEx RADIUS Manager Installation

  2. hotEx RADIUS Manager Network Diagram

  3. Client PC

  4. Connect client PC connection diagram 192.168.1.XX 192.168.1.55 192.168.1.XX 192.168.1.XX

  5. Note: WAN IP Address can be private IP, if the hotspot client gateway (or the location router) is also in the same subnet. WAN IP Address can be public static IP address, if you plan for multiple hotspot locations

  6. HotSpot Client Gateway Installation

  7. System Requirements • Hardware requirement • LinkSys WiFi Router (Model WRT54GL) • Laptop/PC (for initial setup only) • Software requirement • Openwrt Firmware • Configuration file • You are going to connect LinkSys Router with the Laptop/PC through WiFi. No other software or Operating System is necessary. 192.168.1.XX Note: Please download the below firmware and configuration files and keep them in your desktop for further use. http://hotspotexpress.in/ispot/openwrt-wrt54g-squashfs.bin http://hotspotexpress.in/ispot/config.tgz

  8. HotSpot Client Gateway Network Diagram 192.168.1.XX LAN PORT 192.168.1.1

  9. Installing hotspot client gateway • You are now going to convert Linksys router as a hotspot client gateway, using the Laptop/PC. • Switch On the Linksys router. • Ensure the WiFi network adapter of the Laptop/PC is enabled and working, and set it in DHCP Mode (i.e., ‘Obtain IP Address automatically) as shown below. After Setup the Linksys, Open the browser (e.g.: Internet Explorer) and enter the ip “192.168.1.1”. You will see the login prompt. Type the User name and Password (default password is admin) and Click Ok.

  10. After 3-4 minutes, you will see the message “Upgrade Successfully”. (It is very important to wait for this message. Do not go further until you see this message), Click Continue.

  11. WAN PORT HotSpot Client Gateway Network Diagram(after the firmware and config file are uploaded and rebooted) 192.168.1.197 or 192.168.1.198 or 192.168.1.199 192.168.1.XX LAN PORT 192.168.100.1 192.168.100.XX

  12. Enter your hotEx RADIUS Manager Server IP address. Preferably, this would be a Public Static IP

More Related