1 / 12

Comm Operator Tutorial

Learn how to easily send sequence data at specified times via Serial Port Tool. Follow step-by-step instructions to setup automated data transmission rules.

howardw
Download Presentation

Comm Operator Tutorial

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Comm Operator Tutorial How to send sequence data at given time automatically Serial Port Tool http://www.serialporttool.com

  2. Task Send sequence data at given time automatically. Sample: Turn on Relay 1-3 at 9:50 Turn off Relay 1-3 at 9:55

  3. Step 1. Open Comm Operator

  4. Click to open Auto Send Rule Setting dialog Step 2. OpenAuto Send Rule Settingdialog.

  5. Click to show Select Rule Type dialog Click to open Group Data Rule dialog Step 3. Select rule type and open Group Data Ruledialog.

  6. Click to open Event Editor dialog Click to return Group Data Rule dialog Step 4. Set condition of Start Event.

  7. Click to open Event Editor dialog Click to return Group Data Rule dialog Step 5. Set condition of Step Event.

  8. Click to open Data Editor dialog Click to add other data Click to return Group Data Rule dialog Click to return Auto Send Rule Setting dialog Step 6. Edit send data.

  9. New rule name Click to add another group data rule Click to return Auto Send Rule Setting dialog Step 6. Edit send data.

  10. Click to finish setting and return Main GUI Step 7. Finish setting for auto send rule.

  11. Click to show Open Port dialog Click to show Select Link Type dialog Click to open port Click to select link type Step 8. Open port. Make sure the port connected with the device.

  12. Click to start auto send Auto Send Result Turn on Relay 1-3 at 9:50 Turn off Relay 1-3 at 9:55 Step 9. Run the auto send rule.

More Related