1 / 14

Logical controllers' programming

3-Other instructions. Logical controllers' programming. 3.1- Memorization of data. Programming. SET. Logical controllers' programming.

huela
Download Presentation

Logical controllers' programming

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 3-Other instructions Logical controllers' programming 3.1- Memorization of data Programming

  2. SET Logical controllers' programming When the logical condition (000.00) that precedes the function SET it passes ON, the manipulated bit (physical exit 10.00) or (internal relay 200.00) it also passes ON and it stays in this state. 3.1- Memorization of data Ladder Diagram Statement List

  3. RESET Logical controllers' programming When the logical condition (000.00) that precedes the function RESET it passes ON, the manipulated bit (physical exit 10.00) or (internal relay 200.00) it passes OFF and it stays in this state. 3.1- Memorization of data Ladder Diagram Statement List

  4. 3.2- Generation of pulses Logical controllers' programming DIF.UP -DIFU- When the state of the bit “000.01” raisin of OFFON the bit “1.00” it assumes the state ON, during a cycle of the Program.

  5. DIF.DOWN -DIFD- Logical controllers' programming When the state of the bit “000.01” raisin of ONOFF the bit “1.00” it assumes the state ON, during a cycle of the Program 3.2- Generation of pulses

  6. 3.3- Timers Logical controllers' programming For the analysis made to the temporary diagram, we can end that for the contact him associated to the timer TIM it closes (ON), it is necessary that the condition sign (000.01) it stays shut (ON) during the time in that this to count.

  7. TIM Logical controllers' programming Base of Time–000,0 999,9 (tenth of second) 1 second = 10 10 seconds = 100 1 minute = 600 Ladder Diagram 3.3- Timers Statement List

  8. TIMH Logical controllers' programming Base of Time–00,00 99,99 (hundredth of second) 1 second = 100 10 seconds = 1000 1 minute = 6000 Ladder Diagram 3.3- Timers Statement List

  9. Example of Programa TIM Logical controllers' programming Ladder Diagram Statement List 3.3- Timers

  10. 3.4- Counters Logical controllers' programming The counters count down, that is, for each pulse (OFF-ON) in bit’000.00 ' the value #0005 is count down in an unit until reaching the minimum value 0000.

  11. Logical controllers' programming Reached 0000 contact him associated to the counter it closes (ON). THE bit 000.01 to any height makes the counter reset returning everything to the initial position. 3.4- Counters

  12. 3.4- Counters CNT Logical controllers' programming 000.00–Pulse for count down 000.01–Reset of the counter Ladder Diagram Statement List

  13. 3.4- Counters CNTR – Reversible counter Logical controllers' programming 000.00–Pulse for count up 000.01–Pulse for count down 000.02–Reset of the counter Ladder Diagram Statement List LD 000.00 LD 000.01 LD 000.02 CNTR 012 #0005

  14. 3.4- Counters Example of Programa CNT Logical controllers' programming Ladder Diagram Statement List

More Related