Buy High-Quality Track Shoes from Leading Double Grouser Track Shoe Company China

1. Buy High-Quality Track Shoes from Leading Double Grouser Track Shoe Company China The wider the track shoes, the higher will be the pressure on links between pins & bushings. The track shoe that is too big will enhance the wearing procedure of the caterpillar chain & consequently the chance of chain breakage. The track shoe should be adjusted to the terrain on which the machine is working. The wider track shoe, lower ground pressure per centimeter square, but the greater the wear on the whole running mechanism. Single Bar Grouser Shoe– It is the most aggressive shoe with the single deep grouser offering very high traction. These are typically used in bulldozer & rock drilling applications. Double Bar Grouser Shoe– These track shoes provides increased ground engagement where greater traction is needed. Triple Bar Grouser Shoe– These are standard excavator style shoes offering good performance in most of the applications and available for several sizes in varying widths. Flat Shoe– The flat steel shoe, manufactured by using high-grade steel is an extremely successful introduction to our range. It minimizes the surface damage for the large machine working on the concrete or tarmac. Offers greatly improved turn ability over rubber shoes. Single Bar Grouser Notched Shoe– Our most aggressive shoe based on single grouser but notched for even greater ground engagement & reducing side slip.

2. Buy High-Quality Track Shoes Steel for Bulldozers The excavator’s Track Shoes Steel needs to be replaced when bolt heads are at the same height as track shoe grousers. The bolt heads are never designed to bear the machine. The bolts wear along with shoes until track shoes break & crack due to the overloading. For bulldozers, the rule of thumb is – bolt head height times three. The track shoe grousers should grip into the soil to move the machine. The lower the grousers are the smaller the load that can be moved. Moreover, loose track shoes, often with worn-out holes and are ready for replacement. The combination of steel quality & the hardening procedure is guaranteed for high wear resistance. To safeguard quality & to be sure of required tolerances, so, some manufacturers conduct standard batch inspections in factories. Contact us Address: No.89 Jiangshan Avenue, Suqian City, Jiangsu Province, 223801, China Email: inquiry@hyversteel.com Website: http://en.hyversteel.com/ Phone: +8652788858893