1 / 2

1. Make lever parts:

2 x 2 x 3cm pine blocks. 4mm drill through. 10cm broken hacksaw blade. 1. Make lever parts:. sparingly apply Gorilla glue before assembly. 2. Build lever subassembly:. Wrap tightly with electrical tape. 1” #6 drywall screws used throughout. 3. Screw to base:.

illiana-horn
Download Presentation

1. Make lever parts:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 2 x 2 x 3cmpine blocks 4mm drill through 10cm broken hacksaw blade 1. Make lever parts: sparingly apply Gorilla glue before assembly 2. Build lever subassembly: Wrap tightly with electrical tape 1” #6 drywall screws used throughout 3. Screw to base:

  2. 4. Make 2 more similar blocks with through- screws and screw to base 5. Use clip leads to make keying contacts with screws and hacksaw blade. Adjust spacing to taste. 6. Wrap end of hacksaw blade with electrical tape 73 DE AA1LL

More Related