1 / 10

How to SEAL and UNSEAL

How to SEAL and UNSEAL. FAS and SS bits are cleared. Therefore this device is not SEALED. To SEAL device, send 0x0020 to Control() command. Click on Control Value and type “0020”, then hit Enter key on keyboard. Click “Refresh” button to update status. FAS and SS bits are set.

iman
Download Presentation

How to SEAL and UNSEAL

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to SEAL and UNSEAL

  2. FAS and SS bits are cleared. Therefore this device is not SEALED.

  3. To SEAL device, send 0x0020 to Control() command. Click on Control Value and type “0020”, then hit Enter key on keyboard.

  4. Click “Refresh” button to update status. FAS and SS bits are set. Device is in SEALED mode.

  5. Enter UNSEAL command, first step. Type in “0414” and hit Enter key.

  6. Enter UNSEAL command, second step. Type in “3672” and hit Enter key.

  7. Click “Refresh” button to update status. SS bit is now cleared. Device is UNSEALED, but Full Access is not yet enabled.

  8. Enter FULL ACCESS command, first step. Type in “FFFF” and hit Enter key.

  9. Enter FULL ACCESS command, second step. Type in “FFFF” again and hit Enter key.

  10. Click “Refresh” button to update status. FAS bit is now cleared. Device is in FULL ACCESS mode.

More Related