1 / 7

HOW TO MEASURE MECHANICAL SEAL?

HOW TO MEASURE MECHANICAL SEAL?<br>Read More: https://bit.ly/2X5iAt1<br><br>Here are the measurement of a mechanical seal is a systematic process. It will be very essential to how measure mechanical seal right way.<br><br>Website: https://www.mechanicalsealsindia.in/

leakpack
Download Presentation

HOW TO MEASURE MECHANICAL SEAL?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. A Guide By Leak-Pack

  2.  Measurement of a mechanical seal is a systematic process. Sometimes, it is impossible to cross- reference a seal. What should be done to assure that the right seal is received for the pump?  Experts say that it is vital to supply the information as accurately as possible. The two major rotating components of a seal are the spring and seal head.  The seal head should be removed from the spring to measure it accurately. The inside diameter needs to be measured on the back side of the seal head. It is the end that fits towards the spring.

  3.  Thus, you will arrive at the seal size diameter. Remember, it is either the sleeve size where the seal fits over or the shaft size.  In the majority of the seals, the front side has a black carbon face which runs against the stationary portion (known as the seat) of the mechanical seal assembly.  Now you need to measure the spring length while it separates from the head of the seal. The next step is to measure the outside diameter and thickness of the seat or stationary.

  4. ❖The elastomer or rubber part of the seal is made from Nitrile (Buna-N or NBR). The exception is a process where the liquid is either some harsh chemical or high-temperature liquid. ❖The seat or stationary of the seal is made from which metal? Is it some white and hard material? Or is it made from metal? ❖What is the shape of the seat and stationary parts in the mechanical seal you are measuring? Does it contain an O- ring? Or does it have a rubber piece which fits into the seal like a cup? They are called cup mount type and O-ring mount type.

  5.  Other than finding out the sizing of the seal, now it is time to know about the material the seal is made from. You are supposed to get the following information as well:  Is the rotating seal face made from carbon? If it is black, then it is most likely carbon.  Once you have all the information mentioned above, you will be assured of getting the perfect seal assembly. It will fit right and function correctly.  If it is possible, you can send the entire seal assembly so that the seal supplier can measure it and send the right replacement. However, it can happen if you have a spare seal to run the operations well.

  6. Phone : 91 7069871592 Email ID: info@leakpack.com Timing: MON To SAT 9AM TO 7PM WEBSITE https://www.mechanicalsealsindia.in/

More Related