1 / 110

How does a LASH ship differ from a ship that offers container service?

How does a LASH ship differ from a ship that offers container service?. The LASH ship travel inland waterways Container service involves only inland waterways The LASH ship carries loaded barges Container service is for make‑bulk shipments.

indra
Download Presentation

How does a LASH ship differ from a ship that offers container service?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How does a LASH ship differ from a ship that offers container service? • The LASH ship travel inland waterways • Container service involves only inland waterways • The LASH ship carries loaded barges • Container service is for make‑bulk shipments

  2. How does a LASH ship differ from a ship that offers container service? • The LASH ship carries loaded barges

  3. Which of the following is not a legally defined form of transportation? • Common carriers • Contract carriers • Exempt carriers • Private carriers • Preferred carriers

  4. Which of the following is not a legally defined form of transportation? • Preferred carriers

  5. Generally, at higher volumes of throughput, a firm should utilize: • A public warehouse • A federal warehouse • A local warehouse • A private warehouse

  6. Generally, at higher volumes of throughput, a firm should utilize: • A private warehouse

  7. All of the following are true of Charter (or Tramp) shipping industry, except: • Consist mostly of shiploads of one commodity • Very cost oriented • Usually meant for a single shipper • Operate on fixed routes

  8. All of the following are true of Charter (or Tramp) shipping industry, except: • Operate on fixed routes

  9. Which charter vessel arrangement transfer full control of the ship to the charterer? • Voyage • Time • Demise • Liner

  10. Which charter vessel arrangement transfer full control of the ship to the charterer? • Demise

  11. Three primary forms of ship chartering are used. Which charter form has the ship owner renting the vessel for a long period of time and the chartering party (or the shipper) furnishing the crew and physically operating the vessel? • One‑way voyage charter • Two‑way voyage charter • Time charter • Bareboat or demise charter

  12. Three primary forms of ship chartering are used. Which charter form has the ship owner renting the vessel for a long period of time and the chartering party (or the shipper) furnishing the crew and physically operating the vessel? • Bareboat or demise charter

  13. When the terms of shipment are "CIF” (Cost, Insurance, Freight), the SELLER is responsible for all costs of the shipment except: • Export clearance and documentation • Inland freight, in seller’s own country • Loading on vessel in seller’s country • Ocean freight • Unloading vessel in buyer’s country

  14. When the terms of shipment are "CIF” (Cost, Insurance, Freight), the SELLER is responsible for all costs of the shipment except: • Unloading vessel in buyer’s country

  15. Which category of ocean shipping offers common carrier service, sailing on set schedules over specified sea routes? • Liner service • Charter vessels • Private vessels • Demise charter vessels

  16. Which category of ocean shipping offers common carrier service, sailing on set schedules over specified sea routes? • Liner service

  17. What are the required inputs for an MRP? • Production planning file, inventory status file, master production schedule • Production planning file, master production schedule, bill of materials • Master production schedule, bill of materials, customer order file • Master production schedule, bill of materials, inventory status file

  18. What are the required inputs for an MRP? • Master production schedule, bill of materials, inventory status file

  19. Capacity of ships, in general, is most likely to be defined in terms of • Deadweight tons (DWT) • Net registered volume (NRV) • Bale cubic (BC) • Ship long tons (SLT) • Measurement ship tons (MST)

  20. Capacity of ships, in general, is most likely to be defined in terms of • Deadweight tons (DWT)

  21. The cost structure of liner operations is • Largely fixed. • Largely variable. • Evenly balanced between fixed and variable. • Largely common and variable.

  22. The cost structure of liner operations is • Largely fixed.

  23. All of the following are true of the Liner shipping industry, except: • Operate on regular schedules • Operate on regular routes • Usually meant for a single shipper • Rates are published • Very service oriented

  24. All of the following are true of the Liner shipping industry, except: • Usually meant for a single shipper

  25. The objectives of stockless purchasing include all of the following except: • Lower inventory levels • Reduce administrative cost and paperwork • Increase the number of suppliers • Provide for timely delivery of material directly to the User. • Standardize purchase items where possible

  26. The objectives of stockless purchasing include all of the following except: • Increase the number of suppliers

  27. Container ship capacity is most likely to be defined in terms of • Deadweight tons (DWT) • Net registered tons (NRT) • Bale cubic (BC) • TEU’s

  28. Container ship capacity is most likely to be defined in terms of • TEU’s

  29. According to Lardner's Law (also referred to as the law of squares in transportation and trade), if the transportation cost is cut in half the relevant market area is increased • 2 times • 4 times • .5 times • Stays the same

  30. According to Lardner's Law (also referred to as the law of squares in transportation and trade), if the transportation cost is cut in half the relevant market area is increased • 4 times

  31. Demand for an item increases 10 percent, and the value of each unit increases 10 percent. What is the effect on EOQ (assuming everything else remains the same)? • EOQ increases 10 percent • EOQ increases 20 percent • EOQ decreases 10 percent • EOQ stays the same

  32. Demand for an item increases 10 percent, and the value of each unit increases 10 percent. What is the effect on EOQ (assuming everything else remains the same)? • EOQ stays the same

  33. Rail computer systems identify cars for reconsignment and diversions. What are these cars called? • Rollers • Passers • Progressors • Tracers

  34. Rail computer systems identify cars for reconsignment and diversions. What are these cars called? • Rollers

  35. What is a pro-number? • The carrier name identification • A commodity code • A location code • A shipment identification numbers • The electronic transfer of funds

  36. What is a pro-number? • A shipment identification numbers

  37. Quality attributes of carrier service include all of the following except? • Modal selection • Transit time reliability • Accuracy of shipment billing • Loss and damage experience

  38. Quality attributes of carrier service include all of the following except? • Modal selection

  39. What was the purpose of the rule of rate making in the Transportation Act of 1920? • To establish upper limits on motor carrier rates • To eliminate discrimination • To establish set criteria for water carrier rate making • To allow the railroads a fair return on their investment

  40. What was the purpose of the rule of rate making in the Transportation Act of 1920? • To allow the railroads a fair return on their investment

  41. Which of the following best describes the atmosphere of the federal control of transportation from 1887 to 1920? • Positive; developing a strong transportation system • Restrictive; controlling the railroad monopoly • Adequate; helping shippers and carriers equally • Ambivalent; aiding neither shippers or carriers

  42. Which of the following best describes the atmosphere of the federal control of transportation from 1887 to 1920? • Restrictive; controlling the railroad monopoly

  43. Entry regulations are established in transportation to control which of the following? • Excessive rates • Excessive competition • Monopolistic abuses • The recapture of excess profits

  44. Entry regulations are established in transportation to control which of the following? • Excessive competition

  45. The Transportation Act of 1920 provided that in the event a railroad made more than the prescribed return on investment, one-half of the excess was to be paid off to the ICC. What was this provision called? • The recapture clause • The refund clause • The rule of rate making • The contingency clause

  46. The Transportation Act of 1920 provided that in the event a railroad made more than the prescribed return on investment, one-half of the excess was to be paid off to the ICC. What was this provision called? • The recapture clause

  47. What did the 3R Act establish? • Amtrak • Conrail • Government control over Amtrak • Federal regulation of the pipeline

  48. What did the 3R Act establish? • Conrail

  49. Which of the following created the Interstate Commerce Commission? • The Commission Organization Act • The Act to Regulate Commerce • The Granger Law • The Transportation Act of 1920

  50. Which of the following created the Interstate Commerce Commission? • The Act to Regulate Commerce

More Related