1 / 97

PHYS 101 SPRING 2014

PHYS 101 SPRING 2014. Review of CH 8, 9, 10, 11, 13 and 14. Ch 8: Rotational Equilibrium and Rotational Dynamics. Torque, t , is the tendency of a force to rotate an object about some axis t = r Fsin q t is the torque Symbol is the Greek tau r is the length of the position vector

inigo
Download Presentation

PHYS 101 SPRING 2014

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PHYS 101 SPRING 2014 Review of CH 8, 9, 10, 11, 13 and 14

  2. Ch 8:Rotational Equilibrium and Rotational Dynamics • Torque, t, is the tendency of a force to rotate an object about some axis • t = r Fsinq • t is the torque • Symbol is the Greek tau • r is the length of the position vector • F is the tangential force • SI unit is Newton . meter (N.m) Section 9.2

  3. Ch 8:Rotational Equilibrium and Rotational Dynamics Only the tangential component of force causes a torque: Section 9.2

  4. Ch 8:Rotational Equilibrium and Rotational Dynamics • The net torque is the sum of all the torques produced by all the forces • Remember to account for the direction of the tendency for rotation • Counterclockwise torques are positive • Clockwise torques are negative Section 9.2

  5. Ch 8:Rotational Equilibrium and Rotational Dynamics • First Condition of Equilibrium • The net external force must be zero • This is a statement of translational equilibrium • The Second Condition of Equilibrium states • The net external torque must be zero • This is a statement of rotational equilibrium Section 9.2

  6. Ch 8:Rotational Equilibrium and Rotational Dynamics • When a rigid object is subject to a net torque (Στ ≠ 0), it undergoes an angular acceleration Where I is the moment of inertia: Section 9.2

  7. Ch 8:Rotational Equilibrium and Rotational Dynamics Section 9.2

  8. Ch 8:Rotational Equilibrium and Rotational Dynamics • Conservation of Mechanical Energy • Remember, this is for conservative forces, no dissipative forces such as friction can be present • Potential energies of any other conservative forces could be added

  9. Ch 8:Rotational Equilibrium and Rotational Dynamics • Work-Energy Theorem • In the case where there are dissipative forces such as friction, use the generalized Work-Energy Theorem instead of Conservation of Energy • Wnc = DE = DKEt + DKEr + DPE

  10. Ch 8:Rotational Equilibrium and Rotational Dynamics • Angular Momentum L and Conservation of L • Angular momentum is defined as : L = I ω • Since • If St = 0 then DL=0 in other words ff the sum of all torques on an object is zero then angular momentum is conserved: • Li = Lf  Ii ωi=If ωf

  11. Ch 9: Density • The density of a substance of uniform composition is defined as its mass per unit volume: • SI unit: kg/m3 (SI) • Often see g/cm3 (cgs) • 1 g/cm3 = 1000 kg/m3 Section 9.2

  12. Ch 9: Pressure • The average pressure P is the force divided by the area Section 9.2

  13. Ch 9: Young’s Modulus • stress = elastic modulus x strain • In the case of stretching a bar we have tensile stress F/A and tensile strain DL/L0 and the elastic modulus is called Young’s modulus Section 9.3

  14. CH 9: Shear Modulus • In the case of applying a shear stress F/A on an object we have shear strain Dx/h and the elastic modulus is called the shear modulus Section 9.3

  15. CH 9: Bulk Modulus • In the case of applying a volume stress DP on an object we have volume strain DV/V and the elastic modulus is called the bulk modulus Section 9.3

  16. Ch 9: Pressure and Depth equation • Po is normal atmospheric pressure • 1.013 x 105 Pa = 14.7 lb/in.2 • The pressure does not depend upon the shape of the container • One atmosphere (1 atm) = 1.013 x 105 Pa Section 9.4

  17. Ch 9: Pascal’s Principle • A change in pressure applied to an enclosed fluid is transmitted undiminished to every point of the fluid and to the walls of the container. Section 9.4

  18. Ch 9: Archimedes' Principle • Any object completely or partially submerged in a fluid is buoyed up by a force whose magnitude is equal to the weight of the fluid displaced by the object Section 9.6

  19. Ch 9: Buoyant Force, cont. • The magnitude of the buoyant force always equals the weight of the displaced fluid Section 9.6

  20. Ch9: Archimedes’ Principle:Totally Submerged Object • The upward buoyant force is B=ρfluidVobjg • The downward gravitational force is w=mg=ρobjVobjg • The net force is B-w=(ρfluid-ρobj)Vobjg Section 9.6

  21. Ch 9: Archimedes’ Principle:Floating Object • The object is in static equilibrium • The upward buoyant force is balanced by the downward force of gravity • Volume of the fluid displaced corresponds to the volume of the object beneath the fluid level Section 9.6

  22. Ch 9: Equation of Continuity • For a steady flow the conservation of mass leads to: r1A1v1 = r2A2v2 For an incompressible fluid: A1v1 = A2v2 • The product of the cross-sectional area of a pipe and the fluid speed is a constant • The product Av is called the flow rate, Av=DV/Dt Section 9.7

  23. Ch 9: Bernoulli’s Equation • States that the sum of the pressure, kinetic energy per unit volume, and the potential energy per unit volume has the same value at all points along a streamline Section 9.7

  24. Ch 9: Applications of Bernoulli’s Principle: Measuring Speed • Shows fluid flowing through a horizontal constricted pipe • Speed changes as diameter changes • Can be used to measure the speed of the fluid flow • Swiftly moving fluids exert less pressure than do slowly moving fluids Section 9.7

  25. Ch 9: Application – Airplane Wing • The air speed above the wing is greater than the speed below • The air pressure above the wing is less than the air pressure below • There is a net upward force • Called lift • Other factors are also involved

  26. Ch 10: Linear Thermal Expansion • For small changes in temperature • α, the coefficient of linear expansion, depends on the material Section 10.3

  27. Ch 10: Area Thermal Expansion • Two dimensions expand according to Section 10.3

  28. Ch 10: Volume Thermal Expansion • Three dimensions expand Section 10.3

  29. CH 10: Ideal Gas • If a gas is placed in a container the pressure, volume, temperature and amount of gas are related to each other by an equation of state • An ideal gas is one that is dilute enough, and far away enough from condensing, that the interactions between molecules can be ignored. • Most gases at room temperature and pressure behave approximately as an ideal gas Section 10.4

  30. Ch 10: Moles • One mole is the amount of the substance that contains as many particles as there are atoms in 12 g of carbon-12 • Molar mass is the mass of 1 mole of a substance. Section 10.4

  31. Therefore, n moles of gas will contain molecules. Avogadro’s Number NA The number of elementary entities (atoms or molecules) in a mole is given by Avogadro’s number:

  32. Ch 10: Ideal Gas Law • PV = n R T • R is the Universal Gas Constant • n is the number of moles • R = 8.31 J / mol.K • R = 0.0821 L. atm / mol.K • Is the equation of state for an ideal gas • Temperatures used in the ideal gas law must be in kelvins Section 10.4

  33. Ch 10: Ideal Gas Law, Alternative Version • P V = N kB T • kB is Boltzmann’s Constant • kB = R / NA = 1.38 x 10-23 J/ K • N is the total number of molecules • n = N / NA • n is the number of moles • N is the number of molecules Section 10.4

  34. Ch 10: Pressure of an Ideal Gas • The pressure is proportional to the number of molecules per unit volume and to the average translational kinetic energy of a molecule Section 10.5

  35. Ch 10: Molecular Interpretation of Temperature • Temperature is a direct measure of the average molecular kinetic energy of the gas Section 10.5

  36. Ch 10: Speed of the Molecules • Expressed as the root-mean-square (rms) speed • At a given temperature, lighter molecules move faster, on average, than heavier ones • Lighter molecules can more easily reach escape speed from the earth Section 10.5

  37. CH 11: Energy Transfer • When two objects of different temperatures are placed in thermal contact, the temperature of the warmer decreases and the temperature of the cooler increases • The energy exchange ceases when the objects reach thermal equilibrium • The concept of energy was broadened from just mechanical to include internal • Made Conservation of Energy a universal law of nature Introduction

  38. Ch 11: Units of Heat • Calorie • A calorie is the amount of energy necessary to raise the temperature of 1 g of water from 14.5° C to 15.5° C . • A Calorie (food calorie) is 1000 cal • 1 cal = 4.186 J • This is called the Mechanical Equivalent of Heat Section 11.1

  39. CH 11: Heat Capacity • The heat capacity of an object is the amount of heat added to it divided by its rise in temperature: Q is positive if ΔT is positive; that is, if heat is added to a system. Q is negative if ΔT is negative; that is, if heat is removed from a system. Section 11.2

  40. Ch 11: Specific Heat • The heat capacity of an object depends on its mass. A quantity which is a property only of the material is the specific heat: Section 11.2

  41. Ch 11: Calorimetry • You can start with SQk = 0 • Qk is the energy of the kth object where Qk = mk ckDTk • Use Tf – Ti • You don’t have to determine before using the equation which materials will gain or lose heat Section 11.3

  42. Ch 11: Phase Changes • A phase change occurs when the physical characteristics of the substance change from one form to another • Common phases changes are • Solid to liquid – melting (fusion) • Liquid to Solid – freezing (fusion) • Gas to Liquid – condensation (vaporization) • Liquid to gas – boiling (vaporization) • Phases changes involve a change in the internal energy, but no change in temperature Section 11.4

  43. Ch 11: Latent Heat • The energy Q needed to change the phase of a given pure substance is • Q = ±m L • L is the called the latent heat of the substance • Latent means hidden • L depends on the substance and the nature of the phase change • Choose a positive sign if you are adding energy to the system and a negative sign if energy is being removed from the system Section 11.4 Section 11.4

  44. Ch 11: Latent Heat, cont. • SI unit of latent heat are J / kg • Latent heat of fusion, Lf, is used for melting or freezing • Latent heat of vaporization, Lv, is used for boiling or condensing • Table 11.2 gives the latent heats for various substances Section 11.4

  45. Ch 11: Graph of Ice to Steam Section 11.4

  46. Ch 11: Methods of Heat Transfer • Methods of Heat Transfer include • Conduction • Convection • Radiation Section 11.5

  47. Ch 11: Conduction • The transfer can be viewed on an atomic scale • It is an exchange of energy between microscopic particles by collisions • Less energetic particles gain energy during collisions with more energetic particles • Rate of conduction depends upon the characteristics of the substance Section 11.5

  48. Ch 11: Conduction, equation • The slab of material allows energy Q to transfer from the region of higher temperature to the region of lower temperature • A is the cross-sectional area Section 11.5

  49. Ch 11: Multiple Materials, cont. • The rate through the multiple materials will be • TH and TC are the temperatures at the outer extremities of the compound material Section 11.5

  50. Ch 11: Radiation • Radiation does not require physical contact • All objects radiate energy continuously in the form of electromagnetic waves due to thermal vibrations of the molecules • Rate of radiation is given by Stefan’s Law Section 11.5

More Related