1 / 24

Snap Mode in AutoCAD

This option automatically applies geometric constraints between the object which we are creating and point attached to object snap.

instituteadmec
Download Presentation

Snap Mode in AutoCAD

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SNAP MODE IN AUTOCAD A D M E C REPRSENTED BY: ADMEC MULTIMEDIA INSTITUTE PRESENTED BY: ANKIT SINGH

  2. INFER CONSTRAINT This option’s shortcut key is ctrl + shift + i. By using this option when we are creating an object then geometric constraints is apply on the object automatically. This option automatically applies geometric constraints between the object which we are creating and point attached to object snap. Infer constraints are applied on object when the object’s condition is constraints. constraints result the objects position are not changed. In the inferring

  3. HOW TO USE THE INFER CONSTRAINT Click the Infer button in the status bar.

  4. When you are on the Infer button then object will made as same.

  5. SNAP MODE Shortcut of Snap mode is F9. For switch on the snap mode we can press the snap mode button.

  6. SNAP SPACING It is stop the cursor movement to specified X and Y gaping to the location of Rectangular Grid of Snap. Snap X spacing If the snap spacing direction is X then the value will be positive. Snap Y Spacing If the snap spacing direction is Y then the value will be positive.

  7. Specifies the Snap and Grid Setting

  8. GRID DISPLAY Shortcut of Grid Display is F7. For switch on the Grid Display we can press the GRID button in the status bar.

  9. When we will click the Grid button then display pattern would be changed in to rectangular form Dot.It is very useful to create the object too fast.

  10. ORTHO MODE Shortcut of Ortho mode is F8. For switch on the Ortho mode press the ORTHO button in the status bar.

  11. When we are switch on the Ortho mode then we can create the straight line in the direction of X or Y. It is very useful option.

  12. POLAR TRACKING Shortcut of the Polar Tracking is F10. For switch on the Polar Tracking press the POLAR button in status bar.

  13. When we are switch on the polar button then we can maintain the value of length and angle of the object easily.

  14. OBJECT SNAP Shortcut of the Object Snap is F3. For switch on the Object Snap press the OSNAP button in the status bar.

  15. It is very useful to create the object. When we are switch on the OSNAP then we can see midpoint, nearest, center and endpoint in the object.

  16. OBJECT SNAP TRACKING Shortcut of the Object Snap Tracking is F11. For switch on the Object Snap Tracking press the OTRACK button in the status bar.

  17. These are OTRACK sub tools and these are very important to create an object.

  18. DYNEMIC UCS Shortcut of the Dynamic UCS is F6. For switch on the Dynamic UCS press the DUCS button in the status bar.

  19. This is maintain the length value according to X, Y and Z axis. DUCS is very useful in 3D Modeling.

  20. DYNAMIC INPUT Shortcut of the Dynamic Input is F12. For switch on the Dynamic Input press the DYN button in the status bar.

  21. This is maintain the length and angle of the object it is very useful in 3D Modeling.

  22. LINEWEIGHT For switch on the Line weight press the LWT button on the status bar. It’s used to see the weight of the line.

  23. - Contact Us - ADMEC MULTIMEDIA INSTITUTE Leader in Animation & Digital Media Education ISO 9001 : 2008 CERTIFIED Visit Our Websites www.admecindia.co.in www.cadtraininginstitute.com Phones: +91-9811-8181-22, +91-9911-7823-50

  24. THANK YOU

More Related