1 / 25

ERT 417 Waste Treatment In Bioprocess Industry

ERT 417 Waste Treatment In Bioprocess Industry. Semester 1 2011/2012 Huzairy Hassan School of Bioprocess Engineering UniMAP. ADVANCED WASTE TREATMENT TECHNOLOGIES.

iorwen
Download Presentation

ERT 417 Waste Treatment In Bioprocess Industry

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ERT 417Waste Treatment In Bioprocess Industry Semester 1 2011/2012 Huzairy Hassan School of Bioprocess Engineering UniMAP

  2. ADVANCED WASTE TREATMENT TECHNOLOGIES

  3. Advanced waste treatment is the additional treatment needed to remove suspended, colloidal, and dissolved constituentsremaining after conventional secondary treatment.

  4. Introduction

  5. Stabilization process of sludges for volume reduction, production of usable gas (methane), and improving the dewaterability of sludge Solids and biosolids (sludge produced from primary or secondary treatment) are stabilized to: - reduce pathogens - eliminate offensive odors - inhibit, reduce, or eliminate the potential for putrefaction (decay, breakdown, corrosion).

  6. ANAEROBIC DIGESTION • Involves the decomposition of organic and inorganic matter (principally sulfate) in the absence of molecular oxygen. • Major application: in the stabilization of concentrated sludge produced from the treatment of municipal and industrial wastewater. • Can produce sufficient digester gas (methane) to fulfill the energy (heat & electricity) needs.

  7. Design Factors of Anaerobic D. • Solids & Hydraulic Retention Times - Solids retention time (SRT)  average time the solids are held in the digestion process (Mass / day) - Hydraulic retention time, τ  average time the liquid is held in the digestion process (Volume /day) - Digestion systems without recycle  SRT = τ - Hydrolysis, fermentation and methanogenesis (3- reactions in anaerobic process) are directly related to SRT - If the SRT < min. SRT in each reaction, bacteria cannot grow rapidly enough  digestion fails

  8. 2) Temperature - determines rate of digestion - rates of hydrolysis & methane formation - mostly operates in mesophilic temperature - between 30-38⁰C (or thermophilic T 50-57 ⁰C) - important since bacteria of methane-formers are sensitive to temperature changes (ex: ΔT > 1 ⁰C/d affect performance, thus ΔT < 0.5 ⁰C/d is recommended)

  9. 3) Alkalinity - Ca, Mg and ammonium bicarbonates are examples of buffering substances found in a digester. - Digestion process produces ammonium bicarbonate from the breakdown of protein in the raw sludge feed (others found in feed sludge) - The concentration of alkalinity proportional to the solids feed concentration. - Alkalinity mostly in well-established digesters 2000 – 5000 mg/L. - The principal consumer of alkalinity is CO2, i.e.,  CO2 is produced in fermentation and methanogenesis phases . Due to partial pressure of gas in a digester, the CO2solubilizes and forms carbonic acid, which consumes alkalinity. - Therefore, CO2 concentration is reflective of the alkalinity requirements.

  10. Single-stage High Rate Digestion • Heating, auxiliary mixing, uniform feeding, and thickening of feed stream • The sludge is mixed by gas recirculation, pumping, or draft-tube mixers (separation of scum & supernatant does not take place), and the sludge is heated to achieve optimum digestion rates. • With fixed roofs or floating covers

  11. Two-stage Digestion • a high-rate digester is coupled in series with a second tank. • 1st tank: used for digestion, heated & equipped with mixing facilities • 2nd tank: unheated, used for storage • This type of digester is seldom used because of expense of large tank building and negligible benefit of 2nd tank.

  12. Estimating Single-stage, High Rate Digester Volume and Performance Estimate the size of digester required to treat the sludge from a primary treatment plant designed to treat 38 000 m3/d of wastewater. Check the volumetric loading, and estimate the amount of gas produced per capita. For the wastewater to be treated, it has been found that the quantity of dry volatile solids and biodegradable COD removed is 0.15 kg/m3and 0.14 kg/m3, respectively. Assume that the sludge contains about 95% moisture and has a specific gravity of 1.02.

  13. Other pertinent design assumptions are as follows: 1. The hydraulic regime of the reactor is complete-mix 2. SRT = τ= 10 days at 35 ⁰C 3. Efficiency of waste utilization (solids conversion) E = 0.70 4. The sludge contains adequate nitrogen and phosphorus for biological growth. 6. Constants are for a temperature of 35 ⁰C. 7. Digester gas is 65 % methane. 8. Volume of methane produced: 1359 m3/d

  14. Aerobic Digestion • To meet Processes to Significantly Reduce Pathogens (PSRP) requirement (see Table 14-9, 14-10, 14-11 & 14-12, pg 1462-1465) • Used to treat: • waste-activated sludge only • mixtures of waste-activated sludge or trickling filter sludge and primary sludge • Or waste sludge from extended aeration plants • Plant capacity may up to 2 m3/s

  15. Advantages compared to anaerobic digestion: i- volatile solids reduction in a well-operated aerobic digester is approximately equal to that obtained anaerobically ii- lower BOD concentrations in supernatant liquor iii- production of an odorless, humuslike, biologically stable end product iv- recovery of more of the basic fertilizer values in the sludge v- operation is relatively easy vi- lower capital cost vii- suitability for digesting nutrient-rich biosolids

  16. Disadvantages of aerobic digestion: • High power cost is associated with supplying the required oxygen • Digested biosolids produced have poorer mechanical dewatering characteristics • The process is affected significantly by temperature, location, tank geometry, concentration of feed solids, type of mixing/aeration device, and type of tank material • Useful byproduct such as methane is not recovered.

  17. Eqs 14-16 – 14-18: • conversion of organic nitrogen to nitrate results in an increase in the concentration of H2 ions  decrease pH, if sufficient buffering capacity is not available. • About 7 kg of alkalinity (as CaCO3) are destroyed per each kg of ammonia oxidized.  about 50 % of the alkalinity consumed by nitrification can be recovered by denitrification. Eq 14-19  Eq. 14-20

  18. Figure 14-31 Volatile solids reduction in an aerobic digester as a function of digester liquid temperature and digester sludge age

  19. THANK YOU

More Related