410 likes | 1.48k Views
Extrusion and Drawing. Manufacturing Processes. Outline. Extrusion Extrusion of Metals Extrusion Defects Extrusion Equipment Extrusion of Nonmetals Drawing Drawing Process Drawing Equipment. Extrusion.
E N D
Extrusion and Drawing Manufacturing Processes
Outline • Extrusion • Extrusion of Metals • Extrusion Defects • Extrusion Equipment • Extrusion of Nonmetals • Drawing • Drawing Process • Drawing Equipment
Extrusion A compression process in which the material is forced to flow through an opening to produce a shape with a specific cross-section input die product pump
Extrusion Metals Nonmetals
Metal Extrusion Direct Extrusion A ram compresses the material, forcing it through the die Indirect Extrusion The die is mounted on the ram; the material is forced out in the opposite direction of the ram movement
Extrusion Hot Extrusion Involves pre-heating the material above the recrystallization temperature to increase ductility Cold Extrusion Does not pre-heat material; used to produce parts in finished or near-finished form
Extrusion Cold extrusion advantages: • Improved mechanical properties from work-hardening • Good control of dimensional tolerances • Improved surface finish (no oxide film) • No heating required • Competitive production rates and costs
Extruded Metals Typical extruded metals (hot or cold) Aluminum, copper, magnesium, zinc, tin and alloys of these Steel alloys are usually extruded hot; softer steels may be extruded cold Others such as titanium and refractory metals may be extruded, but with difficulty
Extruded Metals Extrusion Temperature Ranges Lead 200-250 °C Aluminum and its alloys 375-475 °C Copper and its alloys 650-975 °C Steels 875-1300 °C Refractory alloys 975-2200 °C
Extrusion of Nonmetals Materials rubber plastic solvents candy glass Products window seals door seals hose and tubing wire insulation candy canes
Hot Feed and Cold Feed Extrusion Ribbon Pellets Cold Feed Extrusion Heating/melting Hot Feed Extrusion Temperature zones
Extrusion of Nonmetals Candy Canes cone rollers candy
Extrusion of Nonmetals Window Seals Cold Feed Extrusion input windup die extruder takeaway belt die
Extrusion of Nonmetals Plastic Bags extruder die air cutting and sealing
Dual Extrusion Opposed Head extruder extruder die Piggy Back die extruder extruder
Dual Extrusion – White Side Wall Black rubber die White rubber die Exit die
Wire, Tube, Bar, Rod Drawing Extrusion pushes the material through the die; drawing pulls the material through the die
Drawing Products electrical wire cable wire stock for fences, hangers, shopping carts etc. rod stock for nails, screws, rivets, springs etc. metal bars
Drawing Process Advantages: • Close dimensional control • Good surface finish • Improved strength and hardness • Adaptability to mass production
Drawing Preparation of the work material: • Annealing • Cleaning • Pointing
Gold Gold is the most ductile metal that exists. 4 pounds of gold can be drawn into a wire that stretches across the country.
Summary Extrusion and drawing provide ways to form shapes with uniform cross sections at high production rates