240 likes | 477 Views
Properties of Emulsions and Foams. FDSC400. Goals. Properties of emulsions Type Size Volume fraction Destabilization of emulsions Creaming Flocculation Coalescence Foams. Emulsion.
E N D
Goals • Properties of emulsions • Type • Size • Volume fraction • Destabilization of emulsions • Creaming • Flocculation • Coalescence • Foams
Emulsion A fine dispersion of one liquid in a second, largely immiscible liquid. In foods the liquids are inevitably oil and an aqueous solution.
Types of Emulsion mm Water Oil Oil-in-water emulsion Water-in-oil emulsion
Multiple Emulsions mm Water Oil Water-in-oil-in-water emulsion Oil-in-water-in-oil emulsion
< 0.5 mm 0.5-1.5 mm 1.5-3 mm >3 mm Emulsion Size
Very few large droplets contain most of the oil Number Distributions Number • < 0.5 mm • 0.5-1.5 mm • 1.5-3 mm • >3 mm
Large droplets often contribute most to instability Median (Volume in class Total volume measured) Polydispersity Note log scale
Volume Fraction f=Total volume of the dispersed phase Total volume of the system Close packing, fmax Monodisperse Ideal ~0.69 Random ~0.5 Polydisperse Much greater
Viscosity Viscosity is the force required to achieve unit flow rate Maximum induced flow rate /ms-1 Force /N Distance/ m Slope viscosity /Nm-2s Force per unit area /Nm-2 No slip at the wall Shear rate /s-1
Emulsion droplets disrupt streamlines and require more effort to get the same flow rate Emulsion Viscosity Dispersed phase volume fraction Viscosity of emulsion Continuous phase viscosity
Chemical Composition Interfacial layer. Essential to stabilizing the emulsion Oil Phase. Limited effects on the properties of the emulsion Aqueous Phase. Aqueous chemical reactions affect the interface and hence emulsion stability
Emulsion Destabilization • Creaming • Flocculation • Coalescence • Combined methods
Creaming Buoyancy (Archimedes) h Continuous phase viscosity Dr density difference g Acceleration due to gravity ddroplet diameter v droplet terminal velocity vs Stokes velocity Friction (Stokes-Einstein)
Flocculation and Coalescence Collision and sticking (reaction) Stir or change chemical conditions FLOCCULATION Rehomogenization Film rupture COALESCENCE
Flocculation leads to an increase in viscosity Water is trapped within the floc and must flow with the floc Effective volume fraction increased Rheology of Flocculated Emulsions rg
Gelled Emulsions Thin liquid Viscous liquid Gelled solid
Creaming & Slight Flocculation • Flocs have larger effective size • Smaller Dr • Tend to cream much faster
Creaming & Extreme Flocculation • Heavily flocculated emulsions form a network • Solid-like properties (gel) • Do not cream (may collapse after lag period)
Foams Concentrated Dilute
Dilute Foams • Somewhat similar to emulsions • Various modes of formation • Large (~mm) spherical bubbles • Very fast creaming • Ostwald ripening
Distorted non-spherical gas cells Very high volume fraction, often >99% Concentrated Foams
Water drains from foam under gravity As water leaves, faces of film are brought closer together Foam Drainage
Film Rupture • Film must thin then burst • Inhibited by surfactant repulsion/interfacial film • Self-repair by the Gibbs-Marangoni effect