200 likes | 403 Views
“Quantum computation with quantum dots and terahertz cavity quantum electrodynamics” Sherwin, et al. Phys. Rev A. 60, 3508 (1999). Norm Moulton LPS. J(t)s 3 •s 4. The hook. Other proposed QC architectures involving quantum dots utilize only nearest-neighbor interactions.
E N D
“Quantum computation with quantum dots and terahertz cavity quantum electrodynamics”Sherwin, et al. Phys. Rev A. 60, 3508 (1999) Norm Moulton LPS
J(t)s3•s4 The hook... • Other proposed QC architectures involving quantum dots utilize only nearest-neighbor interactions • At the time of publication, this was the first proposal for which gate operations might be performed for an arbitrary pair of dots in the QC.
Phonons Laser Pulses THz Resonant Cavity Photons Voltage pulses applied to QDots The approach is analogous to the Cirac-Zoller approach using laser-cooled trapped ions: Both use an “Auxiliary State” to affect quantum gate operations
Proposed system: • Array of GaAs/AlxGa1-xAs triple-well nanostructures with electrical gates • Each QD is charged with 1 and only 1 electron • Dots are in a sharply resonant THz cavity, l>>Ldot • CW laser with fixed ll introduced into the side of the cavity
Stacked self-assembled quantum dots GaAs InAs GaAs GaAs
Etched quantum well structure Superconducting electrodes AlxGa1-xAs GaAs AlxGa1-xAs GaAs AlxGa1-xAs GaAs AlxGa1-xAs
System Hamiltonian Cavity Photons Projections Rabi Oscillations driven by cavity photons (0-1) Rabi Oscillations driven by cavity photons (1-2) Rabi Oscillations driven by laser photons (0-1) Rabi Oscillations driven by laser+cavity photons (1-2)
Transition Energies vs. Applied Field E20 25 Energy (meV) 20 E10 15 10 el+c el ec 5 0 0.5 1.0 1.5 2.0 e (MV/m)
c c t t c c c CNOT Gate Operation: E20(el+c) E10(el) E10(ec) p-pulse at ec State vector picks up phase of i p-pulse at ec State vector picks up phase of i 2p-pulse at el+c State vector picks up phase of -1
c c t c c c CNOT Gate Operation: E20(el+c) E10(el) E10(ec) p-pulse at ec State vector picks up phase of i p-pulse at ec State vector picks up phase of i 2p-pulse at el+c Not on resonance with E12 so no flopping.
Requirements for Quantum Computation • Initializing the computer For kBT<<E10 a wait of less than 1 sec will ensure that all qubits are in state |0>. Arbitrary one-bit rotations are effected using Rabi oscillations induced by laser field. Propose to integrate new quantum well detector into the cavity. Detector is tuned to cavity resonance at the readout phase of the calculation. Enlarge the cavity to create several cavity modes in the QD tunable level-spacing range. This slows things down by reducing e in the cavity resulting in lower W. Make a hybrid device that uses nearest-neighbor concepts in the cavity. • Inputting initial data • Readout • Error correction
Electronic State No experimental data exists on these dots • Cavity Photons Frequencies lower than E10/h, cause adiabatic changes to the energy levels En, leading to phase errors. Requirements for Quantum Computation • Decoherence Sources: • When QD not addressed: SC electrodes, SC path, SC ground-> No dissipation so no thermal fluctuations. Prevented by high-Q 3-D cavity • Emission of freely propagating photons • Interaction with fluctuating gate potential (x-talk, Johnson noise) • Noise during switching will cause errors and will have to be addressed (“in a future publication”).
Requirements for Quantum Computation Sources of decoherence: • Traps far from electrode are shielded by the electrode • Traps in the volume between gate electrodes pose a problem • Rely on future advances in production technology • Calibrate each quantum dot prior to computation • Engineer ultra-low loss THz cavity • Interaction with metastable traps in the semiconductor • Inhomogeneity in the dots • Cavity photon lifetime Make cavity from Ultrapure Si (finite two-phonon losses) Use QDs with E01 smaller than the gap of an s-wave superconductor, make cavity from superconducting transmission line
Requirements for Quantum Computation Sources of decoherence: • Calculations for assumed dot dimensions and properties show that the Eradial,10=30meV, larger than the highest electron energy during a CNOT (26.5meV). • Coupling between radial and and axial wave functions
Interactions with Acoustic Phonons • Electron relaxation via acoustic phonon emission • T1 processes: e- scattering from potential fluctuations arising from local volume compressions and dilations induced by the phonons.(Deformation-potential approximation) Relaxation rate (Fermi’s Golden Rule) Numerical calculation based on all previous assumptions yields t=150 ms
T2 processes: • Pure dephasing of quantum confined excitons is dominated by radiative lifetime of exciton at low temperatures • Polaronic couping to excitons gives DOS peaks nonzero width • Polaronic effects on electrons in QDs will be more like the effects of hydrogenic donors. • Work with CdTe showed that phonon-induced linewidths of transitions of hydrogenic donors much smaller than those of excitons. • Sherwin et al. Speculate that the phonon-induced linewidths will be sufficiently small as to not limit operation of the quantum computer.
CNOT Execution Time nc=3.6 t2p=25ns tp=3.3ns tsingle-bit=few ps (with laser attenuated so Rabi frequency can be low enough.