1 / 12

Garland

NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KPI” INSTRUMENT MAKING FACULTY OPTICAL AND OPTOELECTRONIC DEVICES DEPARTMENT. Garland. Project by : Mozharskaya E . V . chitakate@yandex.ru. Supervised by : Borovitskyi V . N . Kondratenko D . U. General description.

jalene
Download Presentation

Garland

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. NATIONAL TECHNICAL UNIVERSITY OF UKRAINE “KPI” INSTRUMENT MAKING FACULTY OPTICAL AND OPTOELECTRONIC DEVICES DEPARTMENT Garland Project by: MozharskayaE.V. chitakate@yandex.ru Supervised by: BorovitskyiV.N. KondratenkoD.U.

  2. General description • This device is created to be a garland. It may be usedin commercial purposes and as a gift. • The algorithm of work of this device is the following: when a button is pressed the LEDs change their mode of operation to the next one.This happens by means of software. There are four different modes of operation.Whenpower is supplied all lettersget light up. When the button is pressed at first lights up the sign “ПО” then “41”. This mode will not change untill the button is pressed once more. When the button is pressed the next time at first lights up “П”then “O” (meanwhile “П”remains on) after that “4” and then “1”. All letters remain on until “1” lights up. At this point all signs turn off and this mode start over again. When the button is pressed once more the twinkling mode starts. In this case All signs go on at once and turn off at the same time as well. When the button is pressed for the next time the device goes back to the first mode when all signs remain on. Гирлянда

  3. Circuit diagram Гирлянда

  4. Software Гирлянда

  5. Software Гирлянда

  6. Software Гирлянда

  7. Software Гирлянда

  8. Software Гирлянда

  9. Developing process... Гирлянда

  10. Results Гирлянда

  11. Demonstration Гирлянда

  12. Thank you for your attention Contact us: National Technical University of Ukraine “KPI”Optical and optoelectronic devices departmentKyiv 03056, prospektPeremogy 37 http://ooep.ntu-kpi.kiev.ua/ Project developed within the limits of subject “Microprocessors and computers” http://ooep.ntu-kpi.kiev.ua/microcontrollers/ Гирлянда

More Related