1 / 25

Intermolecular Forces

Intermolecular Forces. The attractions between molecules are not nearly as strong as the intramolecular attractions that hold compounds together. Intermolecular Forces.

jamuna
Download Presentation

Intermolecular Forces

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Intermolecular Forces The attractions between molecules are not nearly as strong as the intramolecular attractions that hold compounds together.

  2. Intermolecular Forces They are, however, strong enough to control physical properties such as boiling and melting points, vapor pressures, and viscosities.

  3. Intermolecular Forces These intermolecular forces as a group are referred to as van der Waals forces.

  4. van der Waals Forces • Dipole-dipole interactions • Hydrogen bonding • London dispersion forces

  5. Ion-Dipole Interactions • A fourth type of force, ion-dipole interactions are an important force in solutions of ions. • The strength of these forces are what make it possible for ionic substances to dissolve in polar solvents.

  6. Dipole-Dipole Interactions • Molecules that have permanent dipoles are attracted to each other. • The positive end of one is attracted to the negative end of the other and vice-versa. • These forces are only important when the molecules are close to each other.

  7. Dipole-Dipole Interactions The more polar the molecule, the higher is its boiling point.

  8. London Dispersion Forces While the electrons in the 1s orbital of helium would repel each other (and, therefore, tend to stay far away from each other), it does happen that they occasionally wind up on the same side of the atom.

  9. London Dispersion Forces At that instant, then, the helium atom is polar, with an excess of electrons on the left side and a shortage on the right side.

  10. London Dispersion Forces Another helium nearby, then, would have a dipole induced in it, as the electrons on the left side of helium atom 2 repel the electrons in the cloud on helium atom 1.

  11. London Dispersion Forces London dispersion forces, or dispersion forces, are attractions between an instantaneous dipole and an induced dipole.

  12. London Dispersion Forces • These forces are present in all molecules, whether they are polar or nonpolar. • The tendency of an electron cloud to distort in this way is called polarizability.

  13. Factors Affecting London Forces • The shape of the molecule affects the strength of dispersion forces: long, skinny molecules (like n-pentane tend to have stronger dispersion forces than short, fat ones (like neopentane). • This is due to the increased surface area in n-pentane.

  14. Factors Affecting London Forces • The strength of dispersion forces tends to increase with increased molecular weight. • Larger atoms have larger electron clouds, which are easier to polarize.

  15. Which Have a Greater Effect:Dipole-Dipole Interactions or Dispersion Forces? • If two molecules are of comparable size and shape, dipole-dipole interactions will likely be the dominating force. • If one molecule is much larger than another, dispersion forces will likely determine its physical properties.

  16. How Do We Explain This? • The nonpolar series (SnH4 to CH4) follow the expected trend. • The polar series follows the trend from H2Te through H2S, but water is quite an anomaly.

  17. Hydrogen Bonding • The dipole-dipole interactions experienced when H is bonded to N, O, or F are unusually strong. • We call these interactions hydrogen bonds.

  18. Hydrogen Bonding Hydrogen bonding arises in part from the high electronegativity of nitrogen, oxygen, and fluorine. Also, when hydrogen is bonded to one of those very electronegative elements, the hydrogen nucleus is exposed.

  19. Summarizing Intermolecular Forces

  20. Intermolecular Forces Affect Many Physical Properties The strength of the attractions between particles can greatly affect the properties of a substance or solution.

  21. SAMPLE EXERCISE 11.1 Comparing Intermolecular Forces The dipole moments of acetonitrile, CH3CN, and methyl iodide, CH3I, are 3.9 D and 1.62 D, respectively. (a) Which of these substances will have the greater dipole-dipole attractions among its molecules? (b) Which of these substances will have the greater London dispersion attractions? (c) The boiling points of CH3CN and CH3I are 354.8 K and 315.6 K, respectively. Which substance has the greater overall attractive forces? Solution(a) Dipole-dipole attractions increase in magnitude as the dipole moment of the molecule increases. Thus, CH3CN molecules attract each other by stronger dipole-dipole forces than CH3I molecules do. (b) When molecules differ in their molecular weights, the more massive molecule generally has the stronger dispersion attractions. In this case CH3I (142.0 amu) is much more massive than CH3CN (41.0 amu), so the dispersion forces will be stronger for CH3I. (c) Because CH3CN has the higher boiling point, we can conclude that more energy is required to overcome attractive forces between CH3CN molecules. Thus, the total intermolecular attractions are stronger for CH3CN, suggesting that dipole-dipole forces are decisive when comparing these two substances. Nevertheless, dispersion forces play an important role in determining the properties of CH3I. PRACTICE EXERCISE Of Br2, Ne, HCl, HBr, and N2, which is likely to have (a) the largest intermolecular dispersion forces, (b) the largest dipole-dipole attractive forces? Answers:(a) Br2 (largest molecular weight), (b) HCl (largest polarity)

  22. SAMPLE EXERCISE 11.2 Identifying Substances that Can Form Hydrogen Bonds In which of the following substances is hydrogen bonding likely to play an important role in determining physical properties: methane (CH4), hydrazine (H2NNH2), methyl fluoride (CH3F), or hydrogen sulfide (H2S)? Solution Analyze: We are given the chemical formulas of four substances and asked to predict whether they can participate in hydrogen bonding. All of these compounds contain H, but hydrogen bonding usually occurs only when the hydrogen is covalently bonded to N, O, or F. Plan: We can analyze each formula to see if it contains N, O, or F directly bonded to H. There also needs to be an unshared pair of electrons on an electronegative atom (usually N, O, or F) in a nearby molecule, which can be revealed by drawing the Lewis structure for the molecule. Solve: The criteria listed above eliminate CH4 and H2S, which do not contain H bonded to N, O, or F. They also eliminate CH3F, whose Lewis structure shows a central C atom surrounded by three H atoms and an F atom. (Carbon always forms four bonds, whereas hydrogen and fluorine form one each.) Because the molecule contains a C––F bond and not an H––F bond, it does not form hydrogen bonds. In H2NNH2, however, we find N––H bonds. If we draw the Lewis structure for the molecule, we see that there is a nonbonding pair of electrons on each N atom. Therefore, hydrogen bonds can exist between the molecules as depicted below.

  23. SAMPLE EXERCISE 11.2continued Check: While we can generally identify substances that participate in hydrogen bonding based on their containing N, O, or F covalently bonded to H, drawing the Lewis structure for the interaction, as shown above, provides a way to check the prediction. PRACTICE EXERCISE In which of the following substances is significant hydrogen bonding possible: methylene chloride (CH2Cl2) phosphine (PH3) hydrogen peroxide (HOOH), or acetone (CH3COCH3)? Answer: HOOH

  24. SAMPLE EXERCISE 11.3 Predicting the Types and Relative Strengths of Intermolecular Forces List the substances BaCl2, H2, CO, HF, and Ne in order of increasing boiling points. Solution Analyze: We need to relate the properties of the listed substances to boiling point. Plan: The boiling point depends in part on the attractive forces in the liquid. We need to order these according to the relative strengths of the different kinds of forces. Solve: The attractive forces are stronger for ionic substances than for molecular ones, so BaCl2 should have the highest boiling point. The intermolecular forces of the remaining substances depend on molecular weight, polarity, and hydrogen bonding. The molecular weights are H2 (2), CO (28), HF (20), and Ne (20). The boiling point of H2 should be the lowest because it is nonpolar and has the lowest molecular weight. The molecular weights of CO, HF, and Ne are roughly the same. Because HF can hydrogen bond, however, it should have the highest boiling point of the three. Next is CO, which is slightly polar and has the highest molecular weight. Finally, Ne, which is nonpolar, should have the lowest boiling point of these three. The predicted order of boiling points is therefore Check: The actual normal boiling points are H2 (20 K), Ne (27 K), CO (83 K), HF (293 K), and BaCl2 (1813 K), in agreement with our predictions. PRACTICE EXERCISE (a) Identify the intermolecular forces present in the following substances, and (b) select the substance with the highest boiling point: CH3CH3, CH3OH, and CH3CH2OH. Answers: (a) CH3CH3 has only dispersion forces, whereas the other two substances have both dispersion forces and hydrogen bonds; (b) CH3CH2OH

More Related