1 / 33

KX-NS1000 Step by Step Guide PBX to PBX One-look Network Stacking Card

KX-NS1000 Step by Step Guide PBX to PBX One-look Network Stacking Card. June 20, 2014. Panasonic System Networks PBX SE team. Specifications are subject to change without notice. IP Network (VPN). IP Network. 1. Introduction.

jarman
Download Presentation

KX-NS1000 Step by Step Guide PBX to PBX One-look Network Stacking Card

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. KX-NS1000 Step by Step GuidePBX to PBX One-look NetworkStacking Card June 20, 2014 Panasonic System NetworksPBX SE team Specifications are subject to change without notice.

  2. IP Network(VPN) IP Network 1. Introduction KX-NS1000 one-look networking supports full feature transparencylike TDE600-TDE620 connection.- Max.16 KX-NS1000 can be connected for one-look connection.- Max. 1,000 extensions are supported by one-look networking.- Both master unit and slave unit are “KX-NS1000”.- Slave unit has to be registered to master unit like IP-PT registration.Programming is very easy because it is same as IP-PT registration. TDE620 is connected with TDE600 by cable. Master Register SlaveMax. 15 slave NS1000 can be registered to one master NS1000. Digital PT IP-PTDigital PT is connected with PBX by cable.IP-PT is registered to PBX. COFukuoka COTokyo Register CONiseko

  3. 2. Indicator The PBX mode (Master or Slave) is indicated by LED. Indicators <Slave Unit> <Master Unit> Software version and suffix such as “BX” have to be same forboth main unit and slave unit. BATT ALARM MASTER

  4. IP Network IP Network 3. Stacking Card with one-look networking You can connect a maximum of 2 existing PBXs for one KX-NS1000. A maximum of 8 existing PBXs and 16 KX-NS1000 can be connected for the entire One-look Network. They support 1,000 extensions. An existing PBX refers to a Panasonic KX-TDE series, KX-NCP series, or KX-TDA100/200/600/620 PBX. KX-TDE620 Stacking Stacking KX-TDE600 KX-TDE620 KX-TDE600 KX-NCP Max. 8 PBXs KX-NCP Stacking Stacking Stacking QSIG 100 % FeatureTransparencylike TDE600and TDE620 KX-DT KX-DT KX-DT KX-DT KX-DT KX-DT Different PBX category cannot be mixed to one KX-NS1000. Category 1 : KX-NCP500-1000 Category 2 : KX-TDE(A)100-200 Category 3 : KX-TDE(A)600-620Category 4 : KX-TDA100D NCP500+TDE200 : N/ATDE100+TDA200 : OKTDE600+TDE620 : OKTDE620+TDE620 : OK Programming is not required to connect stacking card.

  5. 4. Table of Contents

  6. MasterUnit Chapter 1 Activation key installationto Master PBX Master Register Slave

  7. MasterUnit 11. Trial Activation Key Activate pre-installed trial activation key for One-look network.- Standard activation key has to be installed before expiration (60 days).

  8. MasterUnit 12. Standard Activation Key Install standard activation key for One-look network if trial activation key has been already expired.

  9. MasterUnit Chapter 2 Slave PBX data assignmentto Master PBX Master Register Slave

  10. MasterUnit 21. Add Site Wizard 1. Click [Add Site].

  11. MasterUnit 22. Add Site Wizard 1. Select correct time zone and time of Slave PBX.2. Click [Next].

  12. MasterUnit 23. Add Site Wizard 1. (Programming is not required.) 2. Click [Next].

  13. MasterUnit 24. Add Site Wizard 1. (Programming is not required.) 2. Click [Next].

  14. MasterUnit 25. Add Site Wizard 1. Select “No”.“No” is strongly recommended for demo of one-look network.If LAN is removed from slave PBX for example, back-up mode starts.Even if LAN is connected again, back-up mode is kept until operation to return to normal one-look mode. So demo of one-look network is not possible without this operation. If demo of back-up is required, it can be assigned later.

  15. MasterUnit 26. Change PBX Site Name 1. Click “List View”.

  16. MasterUnit 27. Change PBX Site Name 1. Change site name and click [Apply].

  17. SlaveUnit Chapter 3 Setup Slave PBXActivation key to Slave PBX Master Register Slave

  18. SlaveUnit 31. Easy Setup Wizard Initialize KX-NS1000 Slave unit by default clear.If IP address of Master unit is 192.168.0.101, do not connect Slave unit in the same network because default of IP address is 192.168.0.101.Connect PC with KX-NS1000 Slave unit.to start “Easy Setup Wizard”. 1 Location Setting Screen 1. Select “Slave” as a PBX type, and specify the IP address of the Master. * 2. Click “Next”. * If the slave is located on the same network with the Master, it is unnecessary to specify the IP address of the Master.

  19. SlaveUnit 32. Easy Setup Wizard 2. PBX Setting Screen 2 • Site name is fixed. • (Will be downloaded from the Master.) 2. Set Time Zone and Local Time of slave unit. 3. Click “Next”. 3. LAN Setting Screen 3 • Set the LAN settings for the slave unit. 2. Click “Next”.

  20. SlaveUnit 33. Easy Setup Wizard 4. Registration Setting Screen 4 1. Select “Active” to enable trial activation key for One-look networking. Standard activation key has to be installed before expiration (60 days). 2. To finish the Easy setup wizard, click “Finish”. 3. To register to master unit, click “OK”.Registration mode of master unit has tostart before or after this step.See chapter 4.

  21. MasterUnit Chapter 4 Slave PBX registrationto Master PBX Master Register Slave

  22. MasterUnit 41. Register Slave unit 1. Click [Registration].

  23. MasterUnit 42. Register Slave unit 1. Select slave unit and click [Next].

  24. MasterUnit 43. Register Slave unit 1. Connect Slave unit to LAN. After registration is completed, the slave unit will reboot automatically.So wait for more 3 minutes.

  25. MasterUnit 44. Register Slave unit After 3 minutes, slave unit becomes In Service. Home Screen Afterregistration Beforeregistration PBX version and so on is displayed. List View Screen

  26. Chapter 5 Demo after setup

  27. 51. Demo or test after setup Paging to all extensions in Tokyo and Fukuoka. KX-NS1000 Slave (Fukuoka) KX-NS1000 Master (Tokyo) Fax DSP DSP NS0130 DHLC8 NS0132 KX-NT Paging Paging Paging Paging KX-DT *33 – Paging group number (01) Cards in TDA/TDE/NCP are recognized automatically through KX-NS0130 without programming.User Group 1 (Paging group 1) has to be programmed to KX-NT to receive paging. Default is User Group 31.

  28. 52. Slave Unit - Programming Slave unit can be programmed from master unit. Slave unit can be selected. Master Slave

  29. 53. Stacking Card - Programming Property of cards in TDA/TDE/NCP can be programmed using NS1000 Web.

  30. 54. Site ID Site ID is displayed to know location (Unit). - The “Site ID” is displayed for “CO Line Settings”, “DIL Table & port Settings”, “Doorphone”, “External Relay” and “External Sensor”.

  31. 55. Direct Log-in to branch unit Direct log-in is used to setup Built-in VM in slave unit. - After direct log-in, Web-MC logs-out from master PBX automatically. Built-in VM : 500 Master Built-in VM : 501 Slave Built-in VM : 500 Master Built-in VM : 501 Slave

  32. Thank you !

  33. Revision

More Related