270 likes | 511 Views
Surface Decoration Techniques. -click on the hyperlinks for a video demo. During this presentation, write down on the chart…. The name of the technique which stage of clay each step needs to be done in Describe the process for each technique
E N D
Surface Decoration Techniques -click on the hyperlinks for a video demo
During this presentation, write down on the chart…. • The name of the technique • which stage of clay each step needs to be done in • Describe the process for each technique • Watch and listen and write down what tools you need to do it. • 30 points
All Ceramics 1 students will use at least 4 of these techniques to create a design on a set of dishes. This is your next project, handbuilders. Wheel throwers will use one of these techniques on their matching bowls. Robot makers will use the staining with iron oxide technique on their robots. This information will show up on the final also.
Impressing Or stamping -Done in the Wet stage stamping
Impressing & Applique- Applique done In the leatherhard stage When you apply Another piece of clay to Your project by scoring and slipping
Incising or Carving -leatherhard Carving
Slip soaked fabric- apply it by scoring your pot when it’s leatherhard, use a thick, well blended slip and dip the fabric strips in it. Apply to your pot after the pot is scored. Let it dry in the desired position. When the clay is fired, the fabric will burn out leaving the clay shell around the fabric and will look the same.
Carved lines (incising) stained with oxide -use the oxide on bisqueware -iron oxide is a stain, not a glaze. You apply it like wood stain with a brush, then wipe it off. It stays in the carvings.
Sgraffito-leatherhard • -sgraffito
Trailing with glaze-bisqueware • Glaze trailing
Slip trailing with Slip- -leatherhard, Use a well blended slip Slip trailing video used translucent glaze, you could use clear
Poured on Glaze -bisqueware Apply a base layer of 3 coats Of glaze, then pour additional colors over it.
Thick, Oozy Slip -leatherhard Steven Hills surface decoration
Underglaze -apply to leatherhard clay or bisqueware. Use a brush and apply 3 layers.
Wax resist- -bisqueware This one was glazed yellow, Wax resist painted on, Brown layered over Using wax resist and glaze
Etched clay w/wax resist-leatherhard or bonedryEtched clay with resist
Stencils -bisqueware Works great with underglazes, use a sponge
Things we don’t have the supplies for but are cool to know about.
Ceramic DecalsI have ordered this paperCeramics 2 and 3 will be doing an assignment incorporating this