1 / 29

Chapter 32

Chapter 32. Radiochemical Methods. Introduction…. Radiochemical methods tend to be labor intensive and generate liquid waste due to the chemical separations that are involved. Furthermore, detection limits tend to be high for long-lived isotopes using radiochemical methods. Introduction.

jeanine
Download Presentation

Chapter 32

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 32 Radiochemical Methods

  2. Introduction… • Radiochemical methods tend to be labor intensive and generate liquid waste due to the chemical separations that are involved. Furthermore, detection limits tend to be high for long-lived isotopes using radiochemical methods

  3. Introduction... • Radiochemical methods are characterized by good accuracy and their ability to be adapted to a wide number of applications. Another advantage to this method is that they minimize or even eliminate the need for separations that are required in other analytical methods.

  4. There are three types of radiochemical methods... (1) Activation analysis. The activity is induced in one or more elements of the sample by irradiation with suitable radiation or particles. Most commonly thermal neutrons from a nuclear reactor source is used.

  5. (2) Tracer method. Radioactivity is introduced into the sample by adding a measured amount of a radioactive species.

  6. (3) Isotope dilution. This method is the most important class of radiochemical quantitative method. In this method, a weighed quantity of radioactively tagged analyte having a known activity is added to a measured amount of sample. The mixture is then mixed to homogeneity and then a fraction of the compound of interest is isolated and purified. The analysis is based upon the activity of the isolated fraction.

  7. Radioactive Isotopes • Radioactive isotopes have unstable nuclei that spontaneously change to form more stable nuclei R • As a result, either new isotopes or new elements are produced isotopes have unstable nuclei that spontaneously change to form more stable nuclei

  8. Isotopes • All isotopes of an element have the same atomic number, and their chemical behavior is very similar • For example, tritium can substitute for hydrogen, and either 125 iodine or 131 iodine can substitute for 126 iodine in chemical reactions

  9. Radioactive isotopes (radionuclides), undergo spontaneous disintegration, which ultimately leads to stable isotopes. Radioactive decay of isotopes occurs with the emission of electromagnetic radiation in the form of x-rays or gamma ray. Accompanying this emission is the formation of electrons, positrons and the helium nucleus or fusion in which a nucleus breaks up into smaller nuclei.

  10. Alpha Decay... • Alpha decay is a common radioactive process encountered with heavier isotopes. The alpha particle is a helium nucleus having a mass of 4 and a charge of +2. Isotopes with mass numbers less than about 150 (Z 60) seldom yield alpha particles. Alpha particles progressively lose their energy as a result of collisions as they pass through matter and are ultimately converted into helium atoms through capture of two electrons from their surroundings.

  11. Alpha Decay

  12. Beta Decay... Beta decay is a radioactive process in which, the atomic number changes but the mass number stays the same There are types of  decay are encountered: negatron formation positron formation electron capture

  13. Beta Radioactivity

  14. Beta Radioactivity • Beta particles are just electrons from the nucleus, the term "beta particle" being an historical term used in the early description of radioactivity. The high-energy electrons have greater range of penetration than alpha particles, but still much less than gamma rays. The radiation hazard from betas is greatest if they are ingested

  15. Beta Radioactivity • The emission of the electron's antiparticle, the positron, is also called beta decay. Beta decay can be seen as the decay of one of the neutrons to a proton via the weak interaction. The use of a weak interaction Feynman diagram can clarify the process

  16. Gamma Decay... • Gamma rays are produced by nuclear relaxations. Gamma-ray emission is the result of a nucleus in an excited state returning to the ground state in one or more quantized steps with the release of monoenergetic gamma rays. Gamma rays, except for their source, are indistinguishable from X-rays of the same energy.

  17. X-Ray Emission... • X-Ray emission are formed from electronic transitions in which outer electrons fill the vacancies created by the nuclear process. One of the processes is electron capture. A second process which may lead to X-rays is internal conversion, a type of nuclear process that is an alternative to gamma-ray emission.

  18. X-Ray Emission

  19. Radioactive Half Life... It is time taken for the radioactive substance to reduce to half its activity. Mathematically it is given by: t1/2 = ln 2/Decay Constant

  20. Radioactive Half Life • Radioactivity is measured by means of a detector that produces a pulse of electricity for each atom undergoing decay • Quantitative information about decay rates is obtained by counting these pulses for a specific period • table with decay data obtained by successive one-minute counts is shown on next slide…

  21. Minutes Counts Minutes Counts 1 180 7 168 2 187 8 170 3 166 9 173 4 173 10 132 5 170 11 154 6 164 12 167 Radioactive Half Life Total counts = 2004 Average counts/min = 167

  22. The relative uncertainties in counting is shown below:

  23. Instrumentation... • Radiation from radioactive sources can be detected and measured in essentially the same way as X-radiation. Gas-filled transducers, scintillation counters and semiconductor detectors are all sensitive to alpha and beta particles and gamma rays because absorption of these particles induces ionization or photoelectrons, which can in turn produce thousands of ion pairs.

  24. The figure below shows a gamma-ray reference spectrum obtained with a 4000 channel analyzer

  25. The schematic below shows a well-type scintillation counter that is used for gamma-ray counting...

  26. Isotope Dilution Method... • Isotope dilution methods, predate activation procedure and are still being extensively applied to problems in all branches of chemistry. Stable and radioactive isotopes are employed in the isotope dilution technique. The isotope dilution method is more convenient because of the ease with which the concentration of the isotope can be determined.

  27. Useful Websites Dealing With Instrumental Analysis... • http://www.cas.org • http://www.chemcenter/org • http://www.kerouac.pharm.uky.edu/asrg/wave/wavehp.html • http://www.anachem.umu.se/jumpstation.htm • http://www.lplc.com/ • http://www.zirchrom.com/ • http://hplc.chem.vt.edu/ • http://www.chrom.com/

  28. References (cont.) • http://www.hanford.gov/techmgmt/factsheets/deploys/icp-ms.htm • http://www.mhhe.com/biosci/ap/vdgconcepts/student/olc/h-reading7.html • http://www.cancerbacup.org.uk/Treatments/Radiotherapy/Radiotherapy/Radioactiveisotopes • http://education.jlab.org/glossary/alphadecay.html • http://hyperphysics.phy-astr.gsu.edu/hbase/nuclear/beta.html

More Related