1 / 30

ILJIN DIAMOND Co., Ltd.

IMD series Iljin Metal bond Diamond . ILJIN DIAMOND Co., Ltd. . IMD series. IMD-F. IMD-D. IMD-B. IMD-A. IMD-G. Core drill of glass Crystal & glass decorating groove Silicon nitride OD grinding Middle stage grinding of Crystal & granite. Sawing of granite & ceramic tiles

jeff
Download Presentation

ILJIN DIAMOND Co., Ltd.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. IMD series Iljin Metal bond Diamond ILJIN DIAMOND Co., Ltd.

  2. IMD series IMD-F IMD-D IMD-B IMD-A IMD-G Core drill of glass Crystal & glass decorating groove Silicon nitride OD grinding Middle stage grinding of Crystal & granite Sawing of granite & ceramic tiles Rough polishing of granite Reinforced glass edge Ferrite motor core CMP pad conditioner Glass (Normal, TFT-LCD, Motor) edge Cut-off wheel for crystal or glass Final polishing of granite Fired tungsten carbide Dental burrs Beveling of glass and mirror Cut-off wheel for glass & quartz Ferrite grinding

  3. 80 70 G 60 F 50 Toughness Index D 40 B 30 A 20 TP IGD II 10 80/100 100/120 120/140 140/170 170/200 200/230 230/270 270/325 325/400 400/500 Mesh Size Toughness Index

  4. Grades equivalent IMD-F IMD-G IMD-D IMD-B IMD-A MBG-660 MBS-640 MBG-620 MBG-610 PDA-999 PDA-989 PDA-878 PDA-P768

  5. Shape comparison As-grown Product Crushed Products IGD-II IMD-TP IGD-V

  6. Ti coating

  7. C A B Ferrite Motor Core Grinding D Company

  8. Glass Grinding

  9. Safety Glass Grinding

  10. Ti coated wheel grit ILJIN DIAMOND Co., Ltd. Grit Business Unit

  11. 1. 코팅 광학 형상 기존 IMD-Fti 170/200 신규 IMD-Fti 170/200 • 광학사진에서 기존 방식은 상당히 어두운 색을 띄고 표면이 거칠어 보임. • 신규 샘플은 기존 방식의 제품과 비교하여 광택을 띄고 표면이 매끄러움.

  12. 2. 코팅 SEM 형상 기존 IMD-Fti 170/200 신규 IMD-Fti 170/200 • 기존 제품은 edge가 벗겨지거나 코팅층이 불균일하게 형성되었음. • 신규 제품은 코팅층이 일관성있게 형성되어 있음.

  13. 2. 코팅 SEM 형상 기존 IMD-Fti 170/200 신규 sputtering IMD-Fti 170/200 • 고배율 관찰에서도 기존 제품에 비해 치밀한 코팅층을 유지하고 있고, edge부분도 손상이 없음.

  14. 3. TRS test result Transverse Rupture Strength Test Dia grade/size: IMD-FTi 170/200 mesh Concentration: 100 Segment size: 6.4*6.4*40mm TRS M/C: ZWICK Z050 Test condition: ISO B Type Kg/mm2 Sintering Condition Bond system: 50%Cu-20%Sn-30%Fe Sintering Temp: 700℃/2min 2 TRS Test-Kgf/mm 3.0 1.74 1.46 0 New coating As-is

  15. 4. 소결 후 본드와의 결합 상태 기존 IMD-Fti 170/200 신규 IMD-Fti 170/200 • SEM 관찰 시 신규 제품이 본드층과의 접합성이 기존 제품에 비해 우수한 것으로 관찰됨.

  16. New Coating As-is 5. 소결 후 TIP 파단면 상태 • SEM 관찰 결과 다이아몬드 표면은 모두 Ti 코팅층으로 형성되어 있음. • 기존 제품과 신규 제품과의 소결 후 탈락된 부분을 비교 관찰한 결과 신규 제품에 비해 기존 제품이 약 20% 가 탈락율이 높은 것으로 분석됨.

  17. Diamondfor CMP Pad conditioner ILJIN DIAMOND Co., Ltd.

  18. Trend of CMP Process Metal vs. Oxide CMP : Million $ CMP growth by material • Metal CMP의 성장속도가 높으며, 이 중 Cu CMP의 성장율이 높음. • Cu CMP에서 scratching issue 및 고집적화에 의한 diamond의 fine, narrow 경향 심화 • Metal CMP에서 Diamond의 Shape, Narrow PSD, Diamond purity의 중요성이 강조

  19. CMP Process Logic Memory • Memory Semiconductor와 Logic 간에 가공하는 피삭재의 차이에 따라 적용되는 Diamond는 틀리게 적용

  20. Tech. Trend of CMP Conditioner Typical Type of CMP Conditioner Pattern, Narrow Size, Special Shape • CMP Conditioner에서 요구되는 Cutting Rate가 높아지고, 고 집적화 되면서 Diamond는 fine, narrow한 PSD가 요구됨. • Conditioning 효과를 높이기 위하여 pattern 및 diamond의 돌출높이는 높이기 위한 개발, 적용 진행 중

  21. Tech. trend of diamond for CMP As was As is Increased number of particles (High Density) Coarse size 80/90 90/100 Medium / fine size 100/120 140/170 170/200 200/230 Blocky shape IMD – F,D PDA 999 MBG 660 Angular shape IMD – B,A,TP PDA 878 MBG 620 Higher Cutting Rate (CR)

  22. Special process for CMP only • Narrow PSD (Double size → Single mesh → Micron size) • Over size particle removing process (3 stage sieving at clean room) PSD Shape • Precision heating control (HPHT) • Perfect shape sorting and consistency Impurity • Minimized metal inclusions using high magnetic field • Suitable for electroplating and vacuum brazing process Special Treatment – I • Removing the twin, sharp needles and weak crystal • No damage of normal crystal’s sharp edge • To prevent the Ni over plating and nodules on diamond crystal • Perfectly clean and non electric conductivity on the surface of diamond • De-magnetizing Special Treatment – II

  23. 6.5 A C B Pressure (GPa) (100) (111) (111)+(100) 6.0 (110) 5.5 D E F 1300 1400 1500 Temp (0C) G H I Shape – HPHT technology

  24. Shape – HPHT technology IMD-F IMD-T

  25. Shape – Sorting technology IMD-F IMD-D IMD-G IMD-TP IMD-B IMD-A

  26. IMD-NB2 IMD-NA1 Special treatment I IMD-NB1 IMD-NA2

  27. Special treatment II

  28. Special treatment II Metal impurities on the surface of diamond grit for CMP (unit : ppb)

  29. ILJIN DI E6 Special treatment II Metal impurities on the surface of diamond grit 150 135.27 100 58.23 (ppb) 50 44.57 31.59 30.47 14.53 10.52 10 9.25 6.82 4.58 2.39 3.76 2.12 1.94 2 1.22 0.83 0.44 0.35 0 Na Ca Cr Cu Fe Ni

  30. End of documents Thank you !

More Related