1 / 35

Unitronics 2009

Unitronics 2009. Review. Hardware Review Jazz ® Series M91 Series Vision120™ Series Vision130™ Series Vision Graphic/Touch OPLC Color Vision Software & Utilities. Review. Hardware Review Software & Utilities. Jazz ® Micro OPLC TM. Key Points: Two line display Real Keypad for

jela
Download Presentation

Unitronics 2009

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Unitronics 2009

  2. Review • Hardware Review • Jazz® Series • M91 Series • Vision120™ Series • Vision130™ Series • Vision Graphic/Touch OPLC • Color Vision • Software & Utilities

  3. Review Hardware Review Software & Utilities

  4. Jazz® Micro OPLCTM Key Points: • Two line display • Real Keypad for Data entry • Modbus and open protocol communication • SMS/ cellular connection • Auto-tune PID, up to 4 loops • Full project upload • Low cost

  5. Jazz® Micro OPLCTM 9 models of JazzTM OPLC JZ10-11-R10 – 6 DI, 4 RO JZ10-11-T10 – 6 DI, 4 TO JZ10-11-R16 –6 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 6 RO JZ10-11-T17 – 6 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 7 TO JZ10-11-R31 – 16 DI, 2 D or A (0-10V) inputs, 2AI (0/4-20 mA), 11 RO JZ10-11-T40 – 16 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 20 TO JZ10-11-PT15- 3 DI, 3 D or A inputs, 3 PT1000/NI1000 inputs, 5 RO and 1 TO (HSO) JZ10-11-UN20 – 9 DI, 2 D or A (0-10V) inputs, 1 AI (0/4-20 mA), 1 PT100/TC inputs, 5 RO, 2 TO JZ10-11-UA24 – 9 DI, 2 D or A (0-10V) inputs, 2 AI (0/4-20 mA), 2 PT100/TC inputs, 5 RO, 2 TO, 2 Analog Outputs

  6. M91 Micro OPLCTM Key Points: Two line display Real Keypad for Data entry Modbus & open protocol communication SMS via GSM communication Full project upload Auto-tune PID, up to 4 loops Expandable Small Data Base (1024 registers) Low cost

  7. M91 Micro OPLCTM 10models of the M91 OPLC M91-2-R1 - 10 DI, 1 AI , 6 RO M91-2-R2C - 10 DI, 2 AI , 6 RO M91-2-R34 - 20 DI, 2 A/D I, 12 RO M91-2-R6C - 6 DI, 6 AI, 1HSI, 6 RO M91-2-RA22 - 8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit, 8 RO M91-2-T1 - 12 DI, 12 TO M91-2-T2C - 10 DI, 2 A/D I , 12 TO M91-2-T38-22 DI, 16 TO M91-2-UN2 - 10 DI, 2 A/D/TC/PT100 Inputs (14 bit) , 12 TO M91-2-UA2 - 10 DI, 2 A/D/TC/PT100 Inputs, 12 bits, 2 AO 12 bits , 10 TO

  8. Vision120TMGraphicOPLCTM Key Points: Graphic display 128x64 Real Keypad for Data entry Application size of 448K 2 serial ports RS232/485 Modbus and open protocol communication Supports CANopen SMS/cellular connection-GSM/GPRS Full project upload Expandable Data Table

  9. Vision120TMGraphicOPLCTM

  10. Vision120TMGraphicOPLCTM 10 models of the V120 OPLC V120-22-R1- 10 DI, 1 AI , 6 RO V120-22-R2C - 10 DI, 2 AI , 6 RO V120-22-R34 - 20 DI, 2 A/D I, 12 RO V120-22-R6C - 6 DI, 6 AI, 1HSI, 6 RO V120-22-RA22- 8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit, 8 RO V120-22-T1 - 12 DI, 12 TO V120-22-T2C- 10 DI, 2 A/D I , 12 TO V120-22-T38-22 DI, 16 TO V120-22-UN2 - 10 DI, 2 A/D/TC/PT100 Inputs (14 bit) , 12 TO V120-22-UA2 - 10 DI, 2 A/D/TC/PT100 Inputs, 12 bits, 2 AO 12 bits , 10 TO

  11. Vision130TMGraphicOPLCTM

  12. Vision130TMGraphicOPLCTM Key Points: Graphic display 128x64, 2.4" Real Keypad for Data entry Application size of 512K; 20µsec per 1K 1 build in serial ports RS232/485 Option for a second port RS232/485 or Ethernet Modbus and open protocol communication serial and over IP Supports CANopen (CANbus as an add on module) GPRS/GSM/CDMA enabled Full project upload Expandable Data Table, Text string library

  13. Vision130TMGraphicOPLCTM 9 models of the V130 OPLC V130-33-R2 - 10 DI, 2 A/D I, 6 RO V130-33-R34 - 20 DI, 2 A/D I, 12 RO V130-33-RA22-8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12 bit , 8 RO V130-33-T2 - 12 DI, 2 A/D I, 3HSI and 7 HSO , 12 TO V130-33-T38-22 DI, 2 A/D I, 3HSI and 7HSO, 16 TO V130-33-TA24 - 12 DI, 2 A/D I 14 bits +2 TC/PT100, 2 AO 12 bits, 1HSI 5 HSO , 10 TO V130-33- R6 – 6 DI, 2 A/D I, 4 AI, 1HSI, 6 RO V130-33-TRA22-12 DI, 2AI, 2 PT100/TC, 1HSC, 4 RO, 2 AO, 4 HSO. V130-33-TR34- 22 DI, 2 AI, 3 HSC, 8RO, 4 HSO.

  14. VisionTM Graphic/Touch OPLCTM(V230/260/280/290/530)

  15. VisionTM Graphic/Touch OPLCTM(V230/260/280/290/530) Key Points: Graphic display 128x64 to 320x240; 3.2” – 5.7” Real Keypad for Data entry/virtual keyboard on the touch Application size of 1MB; 30µsec per 1K 2 build in serial ports RS232 Option for a 3rd port RS232/485 or Ethernet Supports CANopen GPRS/GSM/CDMA enabled Full project upload Expandable Data Table Modbus and open protocol communication

  16. VisionTM Graphic/Touch OPLCTM(V230/260/280/290/530)

  17. VisionTM Graphic/Touch OPLCTM(V230/260/280/290/530) Fast response Expansions EX-A1-expansion adapter IO-DI8-TO8 IO-DI16 IO-TO16 IO-DI8-RO4 IO-RO8 IO-RO16 IO-DI8ACH EX90-DI8-RO8 IO-AI4-AO2 IO-AO6X IO-ATC8 IO-LC1/3 • IO-PT400 • IO-PT4K

  18. VisionTM Graphic/Touch OPLCTM(V230/260/280/290/530) Snap-in I/Os 6 Snap-in models: V200-18-E1B V200-18-E2B V200-18-E3XB V200-18-E4XB V200-18-E5B V200-18-E6B

  19. EX-RC1-Remote IO Adapter The EX-RC1 enables you to remotely locate I/Os up to 1 kilometer from a PLC. You can include both PLCs and adapters on the UniCAN network, up to a total of 60 nodes. Up to 8 I/O modules can be connected to a single adapter.

  20. XL Expansion Modules EX-D16A3-RO8 / TO16 24 VDC 16 Digital Inputs PNP/NPN, including 1 HS Counters 3 Analog Inputs 15 PNP+ 1 PNP/NPN Transistor Outputs,1 HSO Or 8 Relay output (model EX-D16A3-RO8) IO D16A3-RO16 / TO16 24 VDC 16 Digital Inputs PNP/NPN, including 2 HS Counters 3 Analog Inputs 16 Relay/Transistor Outputs

  21. VisionTMColorOPLCTM

  22. VisionTMColorOPLCTM Vision350TM - The first 3.5“ color Touch screen OPLC on the market Digital, Analog and PT100/TC inputs, Digital and Analog outputs Application size of 1MB, 15µsec per 1K Supports CANopen Ethernet option QVGA color TFT display Support Micro SD

  23. VisionTMColorOPLCTM 9 models of the Vision 350TM OPLC V350-35-R2 - 10 DI, 2 A/D I, 6 RO V350-35-R34 - 20 DI, 2 A/D I, 12 RO V350-35-RA22-8 DI, 2 A/D I 14 bit +2 TC/PT100, 2 AO 12bit , 8 RO V350-35-T2 - 10 DI, 2 A/D I, 3HSI and 7 HSO , 12 TO V350-35-T38-20 DI, 2 A/D I, 2 HSI and 7HSO, 16 TO V350-35-TA24 - 8 DI, 2 A/D I 14 bits +2 TC/PT100,2 AO 12 bits, 1HSI 5 HSO , 10 TO V350-35- R6 – 6 DI, 2 A/D I, 4 AI, 1HSI, 6 RO V350-33-TRA22-12 DI, 2AI, 2 PT100/TC, 1HSC, 4 RO, 2 AO, 4 HSO. V350-33-TR34- 22 DI, 2 AI, 3 HSC, 8RO, 4 HSO.

  24. HSC / Shaft Encoder V130 & V350 with TRA22 or TR34 I/O board High Speed NPN Transistor output: Frequency Range 5-200 kHz Support PTO

  25. VisionTMColorOPLCTM Vision570TM - 5.7“ color Touch screen OPLC plus Snap-in & expansion I/Os TFT Color Graphic display, QVGA Application size of 2MB; 9µsec per 1K 2 build in serial ports RS232/485 Option for a 3rd port RS232/485 or Ethernet Modbus and open protocol communication serial or over IP Build in Alarms, string library and trends tasks CANopen Support SD Support Web server capabilities And much more…

  26. VisionTMColorOPLCTM The New V570 model with built in I/O V570-57-T34 : 16 DI (Isolated), 2 HSC / Shaft Encoder, 2 AI, 16 TO (Isolated)

  27. Review About Unitronics Hardware Review Software & Utilities

  28. Software - programming environment M91 and Jazz are programmed using the U90Ladder All Vision products are programmed using the Visilogic In order to ensure Backwards compatibility Unitronics provides also the Version swapper

  29. Software Utilities - Remote Access A tool that the machine builder/system integrator can give his customer as an added value for its selection to work with Unitronics’ products Using Remote Access one can access the displays of the PLC, operand values, data tables and even download using the UniDownloader

  30. Software Utilities - DataXport DataXport is a server based application that allows to retrieve the data stored at the data tables of the PLC using different communication methods and based on automatic process

  31. Software Utilities - Communication DDE/OPC gives a standard way to connect to the Unitronics OPLC using any SCADA or other Windows based application

  32. Software Utilities – SD Suite SD SuiteUse SD Suite to format an SD card to be compatible with Unitronics OPLC, and to Access,convert, read, and export the content of files that a Unitronics OPLC creates on a SD card.

  33. Software Utilities – Remote Operator Remote Operator -Enables you to use a PC to view and work with several remote controller's HMI panel at the same time.

  34. Software Utilities – UniDownloader UniDownloader - Enables you to download complete applications to local or remote controllers. These applications are in compressed .udc format.

  35. Thank you

More Related