1 / 15

By Michael McGuire, Derek Scalzi , and Chandler Schmidt

By Michael McGuire, Derek Scalzi , and Chandler Schmidt. Power Slide Switch. Sync Button. Transceiver. Raspberry Pi. BASE STATION. Transceiver. Raspberry Pi. Indicator LEDs. Power Jack into Base Station. Power Slide Switch. Sync Button. Wall. AC to DC Converter. USB Female.

jera
Download Presentation

By Michael McGuire, Derek Scalzi , and Chandler Schmidt

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. By Michael McGuire, Derek Scalzi, and Chandler Schmidt

  2. Power Slide Switch Sync Button Transceiver Raspberry Pi BASE STATION

  3. Transceiver Raspberry Pi Indicator LEDs Power Jack into Base Station Power Slide Switch Sync Button

  4. Wall AC to DC Converter USB Female Surge Protector Board Current Limiter Circuit Breaker Current Limiter USB Female Relay Board HIGH VOLTAGE POWER STATION Outlets

  5. Flag goes Low -> PMOS goes active -> Current through SHORT indicator LED

  6. SURGE PROTECTOR CIRCUIT

  7. Circuit Breaker AC to DC Converter Current Limiter Power Outlet USB Female Power Socket Relay Board

  8. Transceiver Sync Button On/OffButtons Arduino Manual Override Buttons POWER STATION (ARDUINO)

  9. Sync Button On/Off Buttons Auto/Manual Buttons Power Wires Transceiver Arduino

  10. Project Enclosure for Raspberry Pi 6x3x2” Plastic Sheet to Build Power Station MECHANICAL

  11. Transceivers go awry • Direct connection • AC to DC converter is having heat issues • Heat sink • Use more than one converter • Install low power fan • Ventilation on bottom of eStrip • Digital components near high voltage • High voltage wires use different colors, digital components isolated from high voltage, plastic casing will be used for the power station, and potting will be used so that no high voltage wires will be exposed • Internet can’t be accessed by Pi on KU network • Cell phone WiFi hotspot used with a WiFi module purchased for Pi • Or bring a WiFi router to act as a LAN

  12. Questions?

More Related