1 / 6

Mean-Subtracted Diode TOD ( microV versus sample number)

Mean-Subtracted Diode TOD ( microV versus sample number). q1. u1. q2. u 2. No devices attached to input. Mean-Subtracted Diode RMS ( microV ). q1. u1. q2. u2. No Devices Connected to Input. filter out f < 5 Hz.

jerry
Download Presentation

Mean-Subtracted Diode TOD ( microV versus sample number)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Mean-Subtracted Diode TOD (microV versus sample number) q1 u1 q2 u2 No devices attached to input

  2. Mean-Subtracted Diode RMS (microV) q1 u1 q2 u2

  3. No Devices Connected to Input filter out f < 5 Hz

  4. Mean-Subtracted Diode TOD After Filtering f < 5 hz (microV versus sample number)

  5. Mean-Subtracted Diode RMS After Filtering (microV) 10 microvolt RMS

  6. Analog Devices AD8666 Noise Calculation Rated Noise = 8 –60 nV/sqrt(Hz) for 10 < f<10 KHz. Bandwidth of circuit = 20 KHz sqrt(BW) = 141 /sqrt(sec) Expected noise = 1-8 microvolt RMS per preamp 2 preamps implies additional sqrt(2) Expected noise = 1.4 – 12 microvolt Measured noise for f >5Hz =10 microvolt RMS

More Related