1 / 22

APC at Motorola-SPS

APC at Motorola-SPS. Karen McBrayer, PhD Manager Process Control Systems APRDL/IT. Outline. Before you can begin the fun stuff….. Overview of a project under development Overview of a project in production Continuing Challenges. Before you can begin the fun stuff….

jess
Download Presentation

APC at Motorola-SPS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. APC at Motorola-SPS Karen McBrayer, PhD Manager Process Control Systems APRDL/IT

  2. Outline • Before you can begin the fun stuff….. • Overview of a project under development • Overview of a project in production • Continuing Challenges

  3. Before you can begin the fun stuff….. • You MUST understand the basics of the opportunity • You MUST understand the company’s priorities • You MUST understand the political environment • You MUST understand the business conditions • FINALLY, you MUST sell the idea

  4. One of SPS’s Key Priorities for 2001 HiP7 by 7/7/01

  5. One of SPS-IT’s Priorities for 2001 Configure - don’t Build

  6. Information Technology Adv. Prod. R&D Lab APT Organizational Structures • Human Resources Organization APT - Automation & Process Technology ... Equipment Automation Process Char & Ctrl Process Ctrl Systems

  7. Organizational Structures • Primary Experimental & Manufacturing Organization Dan Noble Center APRDL MOS-13

  8. Tech stocks slumber after rate cut By Mike Tarsala, CBS.MarketWatch.com Last Update: 5:15 PM ET Feb 1, 2001 Business Conditions

  9. Selling the Idea • Meetings. • Meetings. • And more Meetings!

  10. Photolithography Etch ADI Metrology ACI Metrology GTE Control - a project under development • GTE is an etch process used to trim the line width of the gate from After Development Inspection (ADI) dimensions to After Clean Inspection (ACI) dimensions

  11. GTE Control - objective • The objective is to meet the required setpoint (ACI|setpt) after etch with minimal variance ADI GTE Controller Time ACI Photolithography Etch

  12. GTE Control - controller development • Feedback controller developed to control the ACI. Inputs Outputs ADI Etch time GTE Controller Model

  13. GTE Controller - step disturbance rejection GTE R2R Control: output disturbance in ACI target 0.75 Etcher 0.50 Target Norm. ACI meas 0.25 0.0 0 5 10 15 20 25 30 1.25 Norm. ACI disturb 0.63 0 0 5 10 15 20 25 30 80 60 time (sec.) 40 0 5 10 15 20 25 30 Lot Number

  14. GTE Controller - drift disturbance rejection GTE R2R Control: drift disturbance 0.75 Etcher 0.50 Target Norm ACI 0.25 0.00 0 5 10 15 20 25 30 1.25 0.63 Norm ACI disturbance 0 0 5 10 15 20 25 30 70 60 time (sec.) 50 40 0 5 10 15 20 25 30 Lot Number

  15. Photolithography ADI Metrology OL Metrology ALEC - a controller in production • Advanced Lithography Equipment Controller (ALEC) controls both OL Alignment and Dose

  16. ALEC - objectives • The objectives are (1) to minimize the difference between the actual pattern placement and the alignment marks and (2) to meet the required setpoint (ADI|setpt) with minimal variance Alignments Offsets ALEC Dose ADI Photolithography

  17. ALEC - Controls CDs to within + 2.5% of Target 1.025* Target Target 0.975*Target

  18. ALEC - reduces OL mean errors to <60nm UCL = 60 nm

  19. % Out of Control Trends With ALEC After ALEC Before ALEC Layer 1 Layer 2 Layer 3 Layer 4 Layer 5 Layer 6 Layer 7 Layer 8 Layer 9 % OOC WW9 WW10 WW11 WW12 WW13 WW14 WW15 WW16 WW17 WW18 WW19 Work Week ALEC - minimizes rework, improves cycle time & maximizes profits

  20. Continuing Challenges • Negotiating the business and political environments • Process capabilities will always be pushed to the limit • Institutionalize APC as a natural part of process development • Simplify integration of APC into the CIM systems

  21. Acknowledgements • Balakrishnan “Bala” K.S. • Keith Edwards

  22. Thanks... forthe opportunity to share my biases with you on APC development at Motorola

More Related