1 / 27

300-135 TSHOOT Practice Exam - 300-135 Practice Test

Thinking of best 300-135 Dumps for your Cisco 300-135 Exam??? Here it is at (testmayor.com). We present outstanding 300-135 Exam dumps with 100% valid and verified 300-135 Questions Answers. All 300-135 Dumps are obtainable in both PDF file and Exam Engine formats. Free Demos are available to experience the interface and proficiency of our 300-135 Practice Tests.<br>Visit us for more information<br>https://www.testmayor.com/300-135-test.html

jhonwilson882
Download Presentation

300-135 TSHOOT Practice Exam - 300-135 Practice Test

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Cisco 300-135 Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)

  2. Thinking of best 300-135 Dumps for your Cisco 300-135 Exam??? Here it is at (testmayor.com). We present outstanding 300-135 Exam dumps with 100% valid and verified 300-135 Questions Answers. All 300-135 Dumps are obtainable in both PDF file and Exam Engine formats. Free Demos are available to experience the interface and proficiency of our 300-135 Practice Tests. https://www.testmayor.com/300-135-test.html

  3. Don’t take any stress for the preparation of 300-135 Exam because we will provide you real Exam questions answers, Testmayor.com provide you some demo question answer of 300-135 VCE. https://www.testmayor.com/300-135-test.html

  4. QUESTION 1, Exhibit: A network administrator is troubleshooting an EIGRP connection between RouterA, IP address 10.1.2.1, and RouterB, IP address 10.1.2.2. Given the debug output on RouterA, which two statements are true? (Choose two.) A. RouterAreceived a hello packet with mismatched autonomous system numbers. B. RouterAreceived a hello packet with mismatched hello timers. C. RouterAreceived a hello packet with mismatched authentication parameters. D. RouterAreceived a hello packet with mismatched metric-calculation mechanisms. E. RouterAwill form an adjacency with RouterB. F. RouterAwill not form an adjacency with RouterB. Answer: D,F https://www.testmayor.com/300-135-test.html

  5. QUESTION 2, Refer to exhibit. The tunnel between R2 and R5 is not coming up. R2, R4 and R5 do not have any routing information sources other than OSPF and no route filtering is implemented anywhere in the network. Which two actions fix the issue? (Choose Two) A. Redistribute connected routes to OSPF on R5. B. Change the tunnel destination on R2 to 192.168.2.1 C. Advertise interface Lo0 to OSPF on R5. D. Configure a static route on R5 to 2.2.2.2 via 192.168.2.1 E. Fix the OSPF adjacency issue between R2 and r5. Answer: A,C https://www.testmayor.com/300-135-test.html

  6. QUESTION 3, A customer network engineer has made configuration changes that have resulted in some loss of connectivity. You have been called in to evaluate a switch network and suggest resolutions to the problems. https://www.testmayor.com/300-135-test.html

  7. https://www.testmayor.com/300-135-test.html

  8. https://www.testmayor.com/300-135-test.html

  9. https://www.testmayor.com/300-135-test.html

  10. https://www.testmayor.com/300-135-test.html

  11. PC2 in VLAN 200 is unable to ping the gateway address 172.16.200.1; identify the issue. A. VTP domain name mismatch on SW4 B. VLAN 200 not configured on SW1 C. VLAN 200 not configured on SW2 D. VLAN 200 not configured on SW4 Answer: D https://www.testmayor.com/300-135-test.html

  12. Question No : 4 Scenario: A customer network engineer has edited their OSPF network configuration and now your customer is experiencing network issues. They have contacted you to resolve the issues and return the network to full functionality. https://www.testmayor.com/300-135-test.html

  13. https://www.testmayor.com/300-135-test.html

  14. https://www.testmayor.com/300-135-test.html

  15. https://www.testmayor.com/300-135-test.html

  16. https://www.testmayor.com/300-135-test.html

  17. https://www.testmayor.com/300-135-test.html

  18. https://www.testmayor.com/300-135-test.html

  19. Connectivity from R3 to R4, R5 and R6 has been lost. How should connectivity be reestablished? A. Configure R4 with a virtual link to 192.168.13.2 B. Change the R3 and R4 hello-interval and retransmit-interface timers to zero so the link won't go down. C. Add an OSPF network statement for 4.4.4.4 0.0.0.0 area 1 in R3 D. Add an OSPF network statement for 192.168.34.3 0.0.0.255 area 2 in R3 E. Add an OSPF network statement for 192.168.34.0 0.0.0.255 area 1 in R3 Answer: E https://www.testmayor.com/300-135-test.html

  20. Question No : 5 The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. What is the solution to the fault condition? A. Enable OSPF authentication on the s0/0/0 interface using the ip ospf authentication message-digest command B. Enable OSPF routing on the s0/0/0 interface using the network 10.1.1.0 0.0.0.255 area 12 command. C. Enable OSPF routing on the s0/0/0 interface using the network 209.65.200.0 0.0.0.255 area 12 command. D. Redistribute the BGP route into OSPF using the redistribute BGP 65001 subnet command. Answer: A https://www.testmayor.com/300-135-test.html

  21. Question No : 6 The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. What is the solution to the fault condition? A. Under the interface Serial0/0/1 enter the ip access-group edge_security out command. B. Under the ip access-list extended edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command. C. Under the ip access-list extended edge_security configuration delete the deny ip 10.0.0.0.0 0.255.255.255 any command. D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access-group edge_security out command. Answer: B https://www.testmayor.com/300-135-test.html

  22. Question No : 7 The implementations group has been using the test bed to do a ‘proof-of-concept’ that requires both Client 1 and Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and device security, a trouble ticket has been opened indicating that Client 1 cannot ping the 209.65.200.241 address. Use the supported commands to isolated the cause of this fault and answer the following questions. The fault condition is related to which technology? A. NTP B. IP DHCP Server C. IPv4 OSPF Routing D. IPv4 EIGRP Routing E. IPv4 Route Redistribution F. IPv6 RIP Routing G. IPv6 OSPF Routing H. IPv4 and IPv6 Interoperability I. IPv4 layer 3 security Answer: E https://www.testmayor.com/300-135-test.html

  23. Question No : 8 What level of logging is enabled on a Router where the following logs are seen? %LINK-3- UPDOWN: Interface FastEthernet0/1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up A. alerts B. critical C. Errors D. notifications Answer: D https://www.testmayor.com/300-135-test.html

  24. Question No : 9 Which of the following are valid methods of providing a router with information concerning the location of the RP? (Choose all that apply.) A. Statically defined RP B. Bootstrap Router C. Auto-RP D. RP Discovery Protocol (RDP) E. RP Helios F. RPARP(RARP) Answer: A,B,C https://www.testmayor.com/300-135-test.html

  25. Question No : 10 Which of the following commands will remove all dynamic entries for a router's NAT table? A. clear nat translations B. clear ip nat translations* C. clear ip nat statistics D. clear ip nat transactions * E. clear ip nat translations F. clear ip nat translations all Answer: B https://www.testmayor.com/300-135-test.html

  26. Offering Effective PDF Tests Training to Individuals and Companies 100% Money Back Guarantee on All Dumps Special Student Discount Available Printable and Searchable PDF Braindumps User Interactive Exams Software https://www.testmayor.com/300-135-test.html

  27. Good luck Good luck Testmayor provides you guaranteed success in 300-135 exam as we have latest 300-135 exam dumps. Click Here following link to download 300-135 VCE. Click Here following link to download 300-135 VCE. https://www.testmayor.com/300-135-test.html

More Related