1 / 22

AUTOMATION AND ENGINEERING CENTRE Brazil, São Paulo, Jundiaí

AUTOMATION AND ENGINEERING CENTRE Brazil, São Paulo, Jundiaí. Automation and Engineering Centre. Stablished on 110 ha Height above sea level about 700 m. Organizational Structure (reduced). 18 researchers (9 PhD, 6 M.S.) 43 employees (2 M.S.). Main Activities of CEA/IAC.

jill
Download Presentation

AUTOMATION AND ENGINEERING CENTRE Brazil, São Paulo, Jundiaí

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AUTOMATION AND ENGINEERING CENTREBrazil, São Paulo, Jundiaí

  2. Automation and Engineering Centre Stablished on 110 ha Height above sea level about 700 m

  3. Organizational Structure (reduced) 18 researchers (9 PhD, 6 M.S.) 43 employees (2 M.S.)

  4. Main Activities of CEA/IAC Studies and researches:performance of agricultural machinery; postharvesters of vegetables and fruits; biofuels; agroenergy; health and safety in a agriculture; environmental management; Innovation:development of prototypes; Safety regulations: technical support to Labour Ministry Standardisation: co-operation with ABNT in two committees: agricultural tractors; textile and clothing; Certification:we are searching with OECD and ENTAM

  5. Historical about machines test Test at the pulley shaft Ensaio Oficial nº 318 – Trator Porsche, 1948 Ensaio Oficial nº 257 - Tractor Allis Chalmers modelo B, 1947 (Only field test) Drawbar test

  6. PTO OR ENGINE TEST (actually) Schenck 400 kW

  7. TRACTOR TEST (actually) Loading car: - mass 11,000 kg - hydraulic brake Hennan & Froud DPX3 - 4 wheel drive + gearbox, driving the Heenan&Froude brake - radiator and fan, to cool water (2 x 500 l tanks on the roof)

  8. Concrete track (surface with problems): - length 1000 m, width 5 m (10 m in the bends) - coefficient of friction 0,9

  9. Concret track

  10. Loading car: optical sensors (100 signals/rev) to measure driving wheels revolutions

  11. Loading car: 5th wheel

  12. Hydraulic lift test: • load cell 5 Mg • analogic manometre 200 bar Note: This system will be change to add the measurement of hydraulic power!

  13. Weighing and centre of gravity measuring device

  14. Noise measurement: Robotron 050000, with 94dB/1000 Hz calibrator This equipment will be change by a B&K.

  15. TYRES AND TRACTORS FIELD TEST

  16. Sugar combine - field test

  17. Sowing-fertlizer machine bench test

  18. Sowing-fertlizer machine bench test

  19. PTO Drive shaft statical torsional test

  20. Bench for dynamic torsional tests of PTO drive shafts (under construccion)

  21. Testing of protective structures –static test (in design for search funding)

  22. Thanks! Centro de Engenharia e Automação (CEA/IAC) Rod. D. Gabriel P. B. Couto km 65 CEP 13212-240 Jundiaí – SP - Brasil Fev/2008

More Related